Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PNP; Configuration: DARLINGTON WITH BUILT-IN RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 12 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
ACDS - Activité Composants Distribution Service
R&J Components
Fibra_Brandt Electronic GMBH
LittleDiode
MISTER SPROCKETS
Ampacity Inc.
$6.050
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
Aranea Global
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
RTC Component Inc.
Power Bipolar Junction Transistors (BJT) 2SB1570 attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Allegro MicroSystems
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
Maximum VCEsat:
2SB1570 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.75
SB
8541.29.00.80
With more than 30 years of experience developing advanced semiconductor technology and application-specific algorithms, Allegro is a global leader in power and sensing solutions for motion control and energy-efficient systems. Through our innovations in e-Mobility, Clean Energy, and Automation, we are helping move the world toward a safer, more sustainable future. Each year we ship over one billion units into these applications to support our 10,000+ customers around the globe, including over 50 automotive OEMs. Our global engineering, manufacturing and support, combined with our agility, make Allegro a trusted partner to both large enterprises and regional market leaders worldwide.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
1552200168
Molex
WIRE AND CABLE;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
TIP41C
Bourns
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A; Package Shape: RECTANGULAR;
TIP122
Weitron Technology
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; JEDEC-95 Code: TO-220AB; Terminal Form: THROUGH-HOLE;
TIP42A
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 6 A; Terminal Position: SINGLE;
2SC5200
Micro Commercial Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Transistor Application: AMPLIFIER; Maximum Collector-Emitter Voltage: 230 V;
TIP110
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Package Shape: RECTANGULAR;
TIP50
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 1 A; Minimum DC Current Gain (hFE): 10;
TIP31C
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 3 A;
TIP120
Mospec Semiconductor
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; Maximum Collector-Emitter Voltage: 60 V;
JANTXV2N3055
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; JESD-30 Code: O-MBFM-P2; No. of Elements: 1;
ULN2003ANE4
Texas Instruments
ULN2003ANE4 by Texas Instruments is a NPN BJT with 7 elements and 16 terminals. It has a max collector-emitter voltage of 50V and max collector current of 0.5A, making it ideal for switching applications. The package style is in-line with through-hole terminals, suitable for complex configurations.
TIP36C
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 25 A; Transistor Application: SWITCHING;
2SC5200OTU
2SC5200OTU by Onsemi is a NPN power BJT with max. collector-emitter voltage of 250V, max. collector current of 17A, and max. power dissipation of 150W. Ideal for amplifier applications due to its single configuration and silicon transistor element material.
TIP42C
Continental Device India
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
TIP3055
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2.5 MHz; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 15 A;
BUV48A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 15 A; JESD-609 Code: e0;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 117 W; Maximum Collector Current (IC): 15 A; Maximum Collector-Emitter Voltage: 70 V;
JANTX2N3055
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Package Body Material: METAL; No. of Terminals: 2;
TIP117
Inchange Semiconductor
PNP; Configuration: DARLINGTON WITH BUILT-IN RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Maximum Collector-Emitter Voltage: 100 V;
TIP115
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 4 A; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): FLANGE MOUNT;
MJE3055T
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Nominal Transition Frequency (fT): 2 MHz; Maximum Collector Current (IC): 10 A; Maximum Collector-Emitter Voltage: 60 V; No. of Elements: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2SB1022
Toshiba
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 7 A; Maximum Collector-Emitter Voltage: 60 V; Terminal Finish: TIN LEAD;
2SB1560
Allegro MicroSystems
PNP; Configuration: DARLINGTON WITH BUILT-IN RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 10 A;
Sanken Electric
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): 10 A; Package Shape: RECTANGULAR;
2SB1570
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): 12 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
2SB1166S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 8 A; No. of Terminals: 3;
2SB1165T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 5 A; No. of Terminals: 3;
2SB1144S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): 1.5 A; Package Body Material: PLASTIC/EPOXY;
2SB1143S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): 4 A; Package Shape: RECTANGULAR;
2SB1168S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 4 A; No. of Elements: 1;
2SB1143T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): 4 A; Transistor Element Material: SILICON;
2SB1142T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 140 MHz; Maximum Collector Current (IC): 2.5 A; Case Connection: ISOLATED;
2SB1166T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 8 A; Terminal Position: SINGLE;
2SB1167S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 3 A; Terminal Finish: Tin/Copper/Silver/Nickel (Sn/Cu/Ag/Ni);
2SB1165S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 5 A; Package Body Material: PLASTIC/EPOXY;
2SB1167T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 3 A; JESD-30 Code: R-PSFM-T3;
2SB1140T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 320 MHz; Maximum Collector Current (IC): 5 A; Transistor Element Material: SILICON;
2SB1142R
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 140 MHz; Maximum Collector Current (IC): 2.5 A; Transistor Application: SWITCHING;
2SB1140S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 320 MHz; Maximum Collector Current (IC): 5 A; Maximum Collector-Emitter Voltage: 20 V;
2SB1203S-E-Q
Power Bipolar Transistors;
2SB1570P
PNP; Configuration: DARLINGTON WITH BUILT-IN RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): 12 A; No. of Terminals: 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved