Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi 2SB1167T is a PNP Power BJT with hFE of 200, VCE of 100V, and IC of 3A. Ideal for switching applications, it features a silicon element in a rectangular package with through-hole terminals. The transistor's fT is 130MHz making it suitable for high-frequency operations.
Median Price
$0.384
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.370
1k+ parts
$0.307
10k+ parts
$0.274
DigiKey
$0.460
Verical
$0.342
Vyrian
$0.254
Digiode
$0.288
DigiKey Marketplace
Native Components
$0.118
$0.113
Northwest PG Solutions
$0.130
$0.114
Corohmni
Corphita
$0.273
Component Stockers USA
$0.310
$0.290
$0.270
Andel Nordic
$1.230
$0.858
Continental Prestige Electronics
Kulean Microsystems
Problanco Electronics
TANS Electronics
SupplyDigital Components
Kepictronics
UHIMA Technologies
Provides durability and protection for the transistor, making it suitable for various applications and environments.
Allows for easy integration with other PNP components in circuits, enhancing compatibility.
Simplified design and ease of use, ideal for applications requiring a single transistor.
Designed for efficient switching applications with reliable performance.
Compact design for space-saving installations in various electronic devices.
Easy to solder onto circuit boards, providing secure connections for stable operation.
Simplified wiring and connectivity in circuits, reducing complexity during installation.
Allows for easy mounting and secure placement within electronic assemblies.
Ensures consistent and stable amplification of current in various circuit applications.
Provides a high voltage capacity, allowing for use in diverse power applications.
Silicon-based construction ensures high performance, reliability, and energy efficiency.
A high collector current rating enables the transistor to handle large current loads.
Durable terminal finish for strong electrical connections and corrosion resistance.
Easy to interface with other components in the circuit, simplifying overall design.
High transition frequency for fast switching speeds and efficient performance in high-frequency applications.
Power Bipolar Junction Transistors (BJT) 2SB1167T attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
2SB1167T Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.75
SB
8541.29.00.80
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
SS14
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BD138
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 75 MHz; Maximum Power Dissipation (Abs): 8 W; Maximum Collector Current (IC): 1.5 A;
BD679A
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 10 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 4 A;
TIP120TU
TIP120TU by Onsemi is a NPN power BJT with 65W max power dissipation, ideal for switching applications. Featuring a Darlington configuration with built-in diode and resistor, it has a hFE of 1000 and can handle up to 5A collector current. With a max operating temperature of 150°C and collector-emitter voltage of 60V, this transistor is designed for high-power tasks in various electronic circuits.
TIP122-S
Bourns
Bourns TIP122-S is a NPN Darlington transistor with hFE of 1000, VCE of 100V, and IC of 5A. Ideal for power applications in various industries due to its high current gain and voltage capabilities. Package style is flange mount with through-hole terminals for easy installation.
MJE340
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 30;
TIP115
PNP; Surface Mount: NO; Maximum Collector Current (IC): 2 A; Package Style (Meter): FLANGE MOUNT; Minimum DC Current Gain (hFE): 1000; JESD-609 Code: e0;
2N3055
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2.5 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
ULN2803AP
Toshiba
Toshiba's ULN2803AP is an 8-bank NPN Darlington transistor array with built-in diode and resistor, ideal for switching applications. Features include VCEsat of 1.6V, hFE min of 1000, and IC max of 0.5A. With a max operating temp of 85°C and VCE max of 50V, it offers reliable performance in various electronic circuits.
TIP29C
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Maximum Collector Current (IC): 1 A; No. of Elements: 1; Transistor Element Material: SILICON; Maximum Collector-Emitter Voltage: 100 V;
PZT2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; Maximum Collector-Emitter Voltage: 40 V;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
MJD31CT4G
MJD31CT4G by Onsemi is a NPN BJT transistor with 100V VCEO, 3A IC, and 15W Ptot. Ideal for amplifier applications, it has a hFE of 10 and fT of 3MHz. The package is small outline with gull wing terminals, suitable for surface mount assembly.
TIP127
Samsung
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; JEDEC-95 Code: TO-220AB;
Rectron
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; No. of Terminals: 3; Moisture Sensitivity Level (MSL): 1;
MJE3055T
MJE3055T by Onsemi is a NPN BJT transistor with max. power dissipation of 75W, ideal for switching applications. With a max. collector-emitter voltage of 60V and max. collector current of 10A, it operates b/w -55 to 150°C. Its package style is flange mount with through-hole terminals, making it suitable for various power circuit designs.
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Collector Current (IC): 10 A; Minimum DC Current Gain (hFE): 5;
TIP50
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 10 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 1 A;
2N2920A
Power Bipolar Transistors; Qualification: Not Qualified; JESD-609 Code: e0; Terminal Finish: TIN LEAD;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2SB1022
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 7 A; Maximum Collector-Emitter Voltage: 60 V; Terminal Finish: TIN LEAD;
2SB1560
PNP; Configuration: DARLINGTON WITH BUILT-IN RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 10 A;
Sanken Electric
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): 10 A; Package Shape: RECTANGULAR;
2SB1570
PNP; Configuration: DARLINGTON WITH BUILT-IN RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 12 A;
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): 12 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
2SB1166S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 8 A; No. of Terminals: 3;
2SB1165T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 5 A; No. of Terminals: 3;
2SB1144S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): 1.5 A; Package Body Material: PLASTIC/EPOXY;
2SB1143S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): 4 A; Package Shape: RECTANGULAR;
2SB1168S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 4 A; No. of Elements: 1;
2SB1143T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): 4 A; Transistor Element Material: SILICON;
2SB1142T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 140 MHz; Maximum Collector Current (IC): 2.5 A; Case Connection: ISOLATED;
2SB1166T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 8 A; Terminal Position: SINGLE;
2SB1167S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 3 A; Terminal Finish: Tin/Copper/Silver/Nickel (Sn/Cu/Ag/Ni);
2SB1165S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 5 A; Package Body Material: PLASTIC/EPOXY;
2SB1140T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 320 MHz; Maximum Collector Current (IC): 5 A; Transistor Element Material: SILICON;
2SB1142R
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 140 MHz; Maximum Collector Current (IC): 2.5 A; Transistor Application: SWITCHING;
2SB1140S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 320 MHz; Maximum Collector Current (IC): 5 A; Maximum Collector-Emitter Voltage: 20 V;
2SB1203S-E-Q
Power Bipolar Transistors;
2SB1166-T
Sanyo Electric
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved