Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Terminal Position: DUAL; Qualification: Not Qualified;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
Native Components
$0.062
$0.059
Northwest PG Solutions
$0.068
$0.060
One Stop Electronics
$53.050
Corphita
UNI Independent Distributors
RF Small Signal Bipolar Junction Transistors (BJT) BSR12-T attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from NXP Semiconductors
Configuration:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
BSR12-T Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
EU2B-YS3303C
Idec
ROTARY SWITCH;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Philips Components
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
HFA3102B96
Intersil
NPN; Configuration: COMPLEX; Surface Mount: YES; Nominal Transition Frequency (fT): 10000 MHz; Maximum Collector Current (IC): .03 A; Moisture Sensitivity Level (MSL): 1;
MPS5179RLRE
MPS5179RLRE by Onsemi is an NPN RF BJT with a max collector-emitter voltage of 12V and fT of 900MHz. Ideal for amplifier applications, it has a max collector current of 0.05A and low capacitance at 1pF, housed in a cylindrical package suitable for very high-frequency bands.
BFS17,215
NXP Semiconductors
The NXP Semiconductors BFS17,215 is an NPN RF BJT transistor with a max operating temperature of 150°C. It has a transition frequency of 1600 MHz and can handle a collector-emitter voltage of 15V. This transistor is commonly used in amplifier applications due to its ultra-high frequency band capabilities.
MSC81118
STMicroelectronics' MSC81118 is an NPN BJT transistor with a max power dissipation of 6.3W, ideal for amplifier applications in L Band frequencies. Featuring a min hFE of 15 and max IC of 0.2A, this transistor operates at up to 200 °C with a collector-base capacitance of 3.2pF.
CPH6074
CPH6074 by Onsemi is a PNP BJT transistor with 2 elements, suitable for amplifier applications. It operates in the very high frequency band up to 1200 MHz, with a max collector-emitter voltage of 15V and power dissipation of 0.5W. The package is a small outline with Gull Wing terminals, making it ideal for surface mount applications.
2SC5227A-4-TB-E
Onsemi's 2SC5227A-4-TB-E is an NPN RF BJT with a max power dissipation of 0.2W and fT of 7000MHz. Ideal for small outline packages, it operates up to 150 °C, with IC at 0.07A making it suitable for high-frequency applications like RF amplifiers.
MPS5179RL1
MPS5179RL1 by Onsemi is an NPN RF BJT transistor with a max collector-emitter voltage of 12V and a nominal transition frequency of 900MHz. It is commonly used in amplifier applications due to its very high-frequency band capabilities. The transistor has a single configuration, cylindrical package style, and through-hole terminal form for easy integration.
BFR93AW-E6327
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Collector Current (IC): .05 A; No. of Terminals: 3;
BFR520T/R
NXP Semiconductors' BFR520T/R is a NPN RF BJT transistor with 3 terminals. It operates in L Band, with fT of 9000 MHz and hFE of 60. Ideal for amplifier applications, it has a max power dissipation of 0.3 W and can handle a max collector current of 0.07 A.
BFU520XRR
The NXP Semiconductors BFU520XRR is a RF BJT transistor with NPN polarity, ideal for amplifier applications in the L band. It has a max operating temperature of 150°C, fT of 10500 MHz, and can handle a collector-emitter voltage of 16V. This small outline transistor features gull wing terminals and is surface mountable.
2N2368
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 550 MHz; Maximum Power Dissipation (Abs): .36 W; Maximum Collector Current (IC): .5 A;
3N35
Texas Instruments
3N35 by Texas Instruments is a NPN BJT transistor with 4 terminals, operating at 150°C. It has a max collector-emitter voltage of 30V and a transition frequency of 150MHz. Ideal for amplifier applications in the very high-frequency band due to its 0.125W power dissipation capability.
MPS3640
International Devices
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .08 A;
MCH4015
The Onsemi MCH4015 is an NPN RF BJT transistor with a max power dissipation of 0.45W and fT of 10GHz. It is used in X Band applications due to its small outline package, flat terminals, and dual terminal position.
934067698235
RF Small Signal Bipolar Transistors; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: TIN;
934047460135
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 22000 MHz; Maximum Collector Current (IC): .012 A; Terminal Position: DUAL;
JANS2N2907AUB
Vpt Components
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .6 A; Maximum Operating Temperature: 200 Cel; Reference Standard: MIL-19500;
934063143215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 9000 MHz; Maximum Collector Current (IC): .018 A; Package Style (Meter): SMALL OUTLINE;
2SC5226A-5-TL-E
Onsemi's 2SC5226A-5-TL-E is an NPN RF BJT with a max fT of 7000 MHz. It has a max VCE of 10V and IC of 0.07A, suitable for ultra-high frequency applications. This transistor comes in a small outline package with Gull Wing terminals, ideal for surface mount designs.
2SC5488A-TL-H
Onsemi's 2SC5488A-TL-H is an NPN RF BJT with hFE of 90, fT of 5000 MHz, and IC of 0.07 A. Ideal for high-frequency applications in surface-mount configurations due to its low power dissipation and high operating temperature capability up to 150 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BSR12
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1500 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A;
BSR12,215
BSR12/C
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1500 MHz; Maximum Collector Current (IC): .1 A; Terminal Position: DUAL;
BSR12/C,215
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1500 MHz; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON;
BSR12T/R
BSR12TRL
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 15 V; Qualification: Not Qualified;
BSR12TRL13
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Transistor Application: SWITCHING; Package Shape: RECTANGULAR;
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE; JESD-30 Code: R-PDSO-G3;
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .1 A; No. of Terminals: 3; No. of Elements: 1;
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR; No. of Elements: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved