Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' BFR93A,235 is a NPN RF BJT transistor with 3 terminals. It operates in L Band with fT of 6000 MHz and hFE of 40. Ideal for amplifier applications, it has a max power dissipation of 0.35W and can handle up to 12V collector-emitter voltage.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
VNN
Nova Conductors
Aztec Data Supply Inc.
$0.730
Advanced Electronics
$1.644
$1.496
$1.348
Corohmni
$1.707
Semicontronic
$10.050
$9.799
$9.748
AZTECH Wire
$14.234
Ampacity Inc.
$17.050
One Stop Electronics
$39.050
Continental Prestige Electronics
Corphita
UNI Independent Distributors
Argo Parts USA
Microchip USA
Bastille Electronics
This material is durable and cost-effective, making the transistor reliable for various applications.
NPN transistors are commonly used in amplifier circuits, making this product suitable for amplifier applications.
Single configuration simplifies the circuit design and makes it easier to integrate into electronic devices.
Designed specifically for amplifier applications, ensuring optimal performance in amplifying signals.
Surface mount capability allows for easy and efficient soldering onto circuit boards, enabling compact designs.
With a high maximum operating temperature, this transistor can withstand elevated temperatures, ensuring reliability in various environments.
RF Small Signal Bipolar Junction Transistors (BJT) BFR93A,235 attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from NXP Semiconductors
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
Highest Frequency Band:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
BFR93A,235 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.21.00.75
SB
8541.21.00.80
PCN Obsolescence/ EOL - Multiple Devices 05/Jul/2015 Multiple Devices Revision 30/Jun/2015
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Nexperia
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Cheng-yi Electronic
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LL4148-GS08
Vishay Telefunken
Yageo
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
MMBTH81LT1
Onsemi
MMBTH81LT1 by Onsemi is a PNP RF small signal BJT with a max collector-emitter voltage of 20V and a nominal transition frequency of 600MHz. It is commonly used in applications requiring ultra high frequency band performance, such as wireless communication systems.
MMBTH81LT3
The Onsemi MMBTH81LT3 is a PNP RF BJT with 600 MHz fT, 20V VCEO, and 0.85pF CCB. Ideal for UHF applications, it features a Gull Wing terminal form in a small outline package. Suitable for high-frequency designs requiring compact size and low capacitance.
HFA3102BZ96
Intersil
NPN; Configuration: COMPLEX; Surface Mount: YES; Nominal Transition Frequency (fT): 10000 MHz; Maximum Collector Current (IC): .03 A; Maximum Time At Peak Reflow Temperature (s): 30;
MMBTH10RG
MMBTH10RG by Onsemi is an NPN RF BJT transistor with a max collector-emitter voltage of 40V and a transition frequency of 450MHz. It is ideal for amplifier applications in the ultra-high-frequency band, featuring a small outline package with gull wing terminals for surface mount assembly. With a DC current gain of at least 50 and a max power dissipation of 0.225W, this transistor operates efficiently at temperatures up to 150°C.
934056691115
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .015 A; Package Body Material: PLASTIC/EPOXY; Terminal Form: GULL WING;
934060176115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .03 A; JESD-30 Code: R-PDSO-G4;
2N5399
Texas Instruments
2N5399 by Texas Instruments is an NPN RF BJT transistor with a max collector-emitter voltage of 15V and a transition frequency of 600MHz. It is commonly used for switching applications in the ultra-high-frequency band due to its high power dissipation of 0.36W and low collector-base capacitance of 3pF.
2SA1857T-5
Onsemi's 2SA1857T-5 is a PNP BJT transistor with VCEsat of 0.3V, hFE of 135, and fT of 750MHz. Ideal for amplifier applications in the very high frequency band due to its small outline package and max operating temperature of 150 °C.
BFR93AT/R
NXP Semiconductors' BFR93AT/R is a NPN RF BJT transistor with 3 terminals, ideal for L Band applications. It has a max power dissipation of 0.35W, fT of 6000MHz, and hFE of 40. This small outline package transistor operates at up to 150°C and can handle a max collector-emitter voltage of 12V.
BFR93AR,215
NXP Semiconductors' BFR93AR,215 is a NPN RF BJT transistor with 3 terminals. It operates in C band with fT of 6000 MHz and hFE of 40. Ideal for amplifier applications, it has a max power dissipation of 0.3W and can handle up to 12V collector-emitter voltage.
MPS918RLRA
MPS918RLRA by Onsemi is an NPN RF BJT with 3 terminals, operating at a max temp of 150 °C. It has a fT of 600 MHz and Vce(max) of 15V, making it suitable for ultra-high frequency amplifier applications. Packaged in plastic/epoxy, it features a collector-base capacitance of 3pF and collector current up to 0.05A.
BFS17W
Vishay Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2400 MHz; Maximum Collector Current (IC): .025 A; Terminal Position: DUAL;
2SC5662T2LP
ROHM
ROHM 2SC5662T2LP is a NPN RF BJT transistor with max. fT of 3200 MHz, hFE of 56, and VCE(max) of 11V. Ideal for S Band applications like amplifiers due to its small outline package and high transition frequency capability.
BFR93AW,115
NXP Semiconductors' BFR93AW,115 is a NPN RF BJT transistor with 3 terminals. It operates in the ultra-high frequency band up to 5000 MHz and has a max power dissipation of 0.3 W. Ideal for amplifier applications, it features a max collector-emitter voltage of 12V and a min DC current gain of 40 hFE.
BFR193WH6327XTSA1
Infineon Technologies
BFR193WH6327XTSA1 by Infineon is a NPN RF BJT transistor with 12V VCE, 8000MHz fT, and 0.08A IC. Ideal for L Band applications like amplifiers due to its high transition frequency and low collector-base capacitance. Features Gull Wing terminals in a small outline package for surface mount assembly.
KSC1730O
KSC1730O by Onsemi is an NPN RF BJT transistor with a max VCEsat of 0.5V, ideal for amplifier applications in the UHF band. It has a min hFE of 70, max fT of 1100MHz, and can handle a max IC of 0.05A.
LPT16ED
Sige Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .08 A; Transistor Application: AMPLIFIER;
MPS5179RLRP
MPS5179RLRP by Onsemi is a NPN RF BJT with 3 terminals, ideal for amplifier applications in the VHF band. It has a max power dissipation of 0.2W, hFE of 25, and fT of 900MHz. The transistor operates at up to 150 °C, with VCE(max) of 12V and IC(max) of 0.05A.
LM3146N
Rochester Electronics
NPN; Configuration: COMPLEX; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Collector Current (IC): .05 A; No. of Terminals: 14;
MPSH11RL
MPSH11RL by Onsemi is an NPN RF BJT with a max. collector-emitter voltage of 25V and fT of 650MHz. It is used in ultra-high frequency applications due to its low capacitance (0.7pF) and high temp. tolerance (150 °C). The transistor, in a cylindrical package, has 3 terminals and silicon element material for optimal performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BFR93AE6327HTSA1
BFR93AE6327HTSA1 by Infineon Technologies is a NPN RF BJT with 3 terminals, suitable for amplifier applications. It has a max power dissipation of 0.3W, hFE of 70, and fT of 6000MHz. This transistor operates at up to 150°C and features a collector-emitter voltage of 12V.
BFR92PE6327HTSA1
BFR92PE6327HTSA1 by Infineon is a NPN RF BJT transistor with max fT of 5000 MHz. It's ideal for L Band applications, featuring a max IC of 0.03 A and hFE of 70. With a package style of Small Outline, it operates up to 150 °C and has a max VCE of 15 V.
BFR93AWH6327XTSA1
BFR93AWH6327XTSA1 by Infineon is a NPN RF BJT transistor with 12V VCEO, 0.09A IC, and 6000MHz fT. Ideal for L Band applications, it's a single configuration amplifier in a small outline package suitable for surface mount technology.
BFR93A,215
NXP Semiconductors' BFR93A,215 is a NPN RF BJT transistor with max. freq. of 6000 MHz and hFE of 40, ideal for L Band applications like amplifiers. It has a max. power dissipation of 0.35 W, operates up to 175°C, and features a small outline package with gull wing terminals for surface mount assembly.
BFR93AW-E6327
BFR93AW-E6327 by Infineon Technologies is a NPN RF BJT transistor with 3 terminals. It operates in L Band with a transition frequency of 6000 MHz, ideal for amplifier applications. This small outline package has a max power dissipation of 0.3 W and can handle up to 12 V collector-emitter voltage.
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Collector Current (IC): .05 A; No. of Terminals: 3;
BFR92AW,115
NXP Semiconductors' BFR92AW,115 is an NPN RF BJT with a max fT of 5000 MHz. It has a max power dissipation of 0.3 W and operates in the ultra-high frequency band. Ideal for amplifier applications, this transistor comes in a small outline package with gull wing terminals for surface mount assembly.
BFR93A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Collector Current (IC): .05 A; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .09 A;
RF Small Signal Bipolar Transistors; Surface Mount: YES; Terminal Position: DUAL; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): SMALL OUTLINE;
Motorola
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3000 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .035 A;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Nominal Transition Frequency (fT): 6000 MHz; Maximum Collector Current (IC): .035 A; No. of Elements: 1; Maximum Collector-Emitter Voltage: 12 V;
Temic Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Collector Current (IC): .05 A; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .035 A;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .05 A;
Philips Components
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 5000 MHz; Maximum Collector Current (IC): .035 A; JESD-30 Code: R-PDSO-G3;
BFR92A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Collector Current (IC): .03 A; No. of Terminals: 3;
BFR93AL
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3000 MHz; Maximum Collector Current (IC): .035 A; Maximum Power Dissipation Ambient: .306 W;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved