Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 85 W; Maximum Collector Current (IC): 12 A; No. of Terminals: 3;
Median Price
$0.998
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Freelance Electronics
1+ parts
$0.302
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$1.694
Chip Stock
Digiode
Anansix
Elcom Components
R&J Components
Vyrian
ABC Electronics Ltd.
LittleDiode
Fibra_Brandt Electronic GMBH
ComSIT Distribution GmbH
ComSIT USA
Halfin
ECAB
Huijzer Components
Manotoh
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Corohmni
$1.207
IDEA Electronic Components Group
$1.627
$1.465
Continental Prestige Electronics
$1.660
Argo Parts USA
Netroflash
$1.609
$1.575
Aztec Data Supply Inc.
$1.794
MKK Technologies
$3.060
DigiPath Technology Company
AZTECH Wire
$17.997
One Stop Electronics
$24.050
Microchip USA
$25.200
$24.840
Component Stockers USA
$99.990
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Kepictronics
SupplyDigital Components
TANS Electronics
Authorized Procurement Solutions
Corphita
Kulean Microsystems
UNI Independent Distributors
Problanco Electronics
Alle Elektronik GmbH
Parana Technologies
$1.946
UHIMA Technologies
Assy Fe
Power Bipolar Junction Transistors (BJT) BUV27 attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Comset Semiconductors
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Maximum Fall Time (tf):
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Maximum Turn Off Time (toff):
Maximum Turn On Time (ton):
Maximum VCEsat:
BUV27 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Comset Semiconductors came into existence with a gap widened by major manufacturers such as Philips when they began discontinuing production of part of their transistors catalog. Comset Semiconductors identified a growing number of unfulfilled demands coming from various industries such as transportation, medical, telecom and security. Amongst them, customers manufacturing embedded electronics equipment or operating in the rail industry wanted to be assured that production and delivery of transistors would remain regular year by year, so that their own production would remain secure. To bridge that gap, Comset Semiconductors began to extend the life cycle of mature but still useful and most popular types of devices, true to the specifications of the original, avoiding the expense of costly redesigns.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fagor Electronica S Coop
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Hy Electronic
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
TIP127G
Changzhou Galaxy Century Microelectronics
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; Package Style (Meter): FLANGE MOUNT;
TIP115
SPC TECHNOLOGY/ MULTICOMP
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Package Shape: RECTANGULAR;
MJE3055T
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 10 A;
MJD127G
MJD127G by Onsemi is a PNP power BJT with Darlington configuration, built-in diode and resistor. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. Ideal for switching applications in small outline packages, it operates up to 150°C with a transition frequency of 4MHz.
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
TIP117
Semiconductors
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 4 A; Minimum DC Current Gain (hFE): 500;
PN2907AT&A
PN2907AT&A by Continental Device India is a PNP BJT transistor with 60V VCEsat, 1.6V VCEsat, and 100 hFE. Ideal for switching applications due to its fast rise/fall times of 40/30ns and high transition frequency of 200MHz. With a power dissipation of 1.5W, it operates in temperatures ranging from -55 to +150°C.
MJD32CT4G
The Onsemi MJD32CT4G is a PNP BJT transistor with 100V VCE, 3A IC, and 15W power dissipation. Ideal for amplifier applications, it has a min hFE of 10 and operates up to 150°C. This surface-mount transistor in a small outline package is designed for high-performance amplification.
ZTX851
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 5 A; No. of Elements: 1;
TIP41C
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
TIP120
Tt Electronics Plc
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Minimum DC Current Gain (hFE): 1000; Terminal Finish: Tin/Lead (Sn/Pb);
ULN2003ANE4
ULN2003ANE4 by Texas Instruments is a NPN BJT with 7 elements and 16 terminals. It has a max collector-emitter voltage of 50V and max collector current of 0.5A, making it ideal for switching applications. The package style is in-line with through-hole terminals, suitable for complex configurations.
BD679
Crimson Semiconductor
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Collector Current (IC): 4 A; Maximum VCEsat: 2.5 V;
TIP41CTU
TIP41CTU by Onsemi is a NPN power BJT with 100V VCEO, 6A IC, and 65W Ptot. Ideal for switching applications, it has hFE of 15 and fT of 3MHz. The transistor comes in a plastic/epoxy package with through-hole terminals for easy mounting.
TIP127
Central Semiconductor
PNP; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A;
BDX53C
Power Innovations
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 8 A; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): FLANGE MOUNT;
TIP127G by Onsemi is a PNP Power BJT with 100V VCEO, 5A IC, and 65W Ptot. It features a Darlington configuration for amplifier applications. The transistor has a min hFE of 1000 and operates up to 150°C, making it suitable for high-power amplification needs.
D44H8
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 10 A;
TIP122
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A;
Power Bipolar Transistors; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; No. of Terminals: 3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BUV27
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 13 A; Terminal Form: THROUGH-HOLE; Maximum VCEsat: 1.5 V;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; Maximum Collector Current (IC): 12 A; Peak Reflow Temperature (C): 235;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 12 A; Maximum Operating Temperature: 175 Cel;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 12 A; Maximum Collector-Emitter Voltage: 120 V; Terminal Finish: TIN SILVER COPPER;
BUV298AV
Philips Semiconductors
Power Bipolar Transistors; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 50 A; Maximum Operating Temperature: 150 Cel; Maximum VCEsat: 1.2 V; No. of Elements: 1;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 96 A; Qualification: Not Qualified; Transistor Element Material: SILICON;
North American Philips Discrete Products Div
Power Bipolar Transistors; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 50 A; Maximum VCEsat: 1.2 V; Maximum Fall Time (tf): 400 ns; No. of Elements: 1;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 60 A; Package Shape: RECTANGULAR;
BUV26G
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 85 W; Maximum Collector Current (IC): 20 A; Terminal Position: SINGLE;
BUV20
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 8 MHz; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 50 A;
BUV23
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 8 MHz; Maximum Collector Current (IC): 30 A; Minimum DC Current Gain (hFE): 8;
BUV21G
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 8 MHz; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 40 A;
BUV22G
BUV22G by Onsemi is a NPN power BJT with 250V VCE, 40A IC, and 250W Ptot. Ideal for switching applications due to its single configuration and high transition frequency of 8MHz. Its metal package body and flange mount style make it suitable for high-power requirements in various electronic systems.
BUV21
BUV22
BUV26
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 85 W; Maximum Collector Current (IC): 20 A; Maximum Collector-Emitter Voltage: 90 V;
BUV27G
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; Maximum Collector Current (IC): 12 A; Maximum Collector-Emitter Voltage: 120 V;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 8 MHz; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 30 A;
BUV24
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 8 MHz; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 20 A;
BUV28-QR-BR3
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 10 A; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3;
Comset Semiconductors
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved