Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UC5612PWP by Texas Instruments is a SCSI bus terminator with 24 terminals, operating voltage range of 3.8V to 5.25V, and pull-up resistance of 110 ohm. It is designed for commercial applications with a temperature range of 0-70°C, featuring a small outline package style suitable for surface mount assembly.
Median Price
$4.375
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$3.500
1k+ parts
$3.130
10k+ parts
$2.940
DigiKey
$4.600
Verical
$3.913
$3.675
Digiode
$3.696
Vyrian
$3.890
Corphita
$3.501
Parana Technologies
$9.001
$835.922
$8.101
DigiPath Technology Company
$9.912
ChromeModa Solutions
$10.114
$8.293
IDEA Electronic Components Group
$9.608
$9.103
Perfect Parts
Kepictronics
Plastic and epoxy materials provide durability and good protection for the internal components of the terminator.
Surface mount technology allows for easy installation and saves space on the PCB.
Supports a wide range of supply voltages, ensuring compatibility with various systems.
Rectangular shape fits well on the PCB and allows for efficient placement in the circuit.
Designed to work with 5V power supplies commonly found in electronic devices.
Provides multiple connection points for effective signal transmission and termination.
Allows for operation even at lower supply voltages, ensuring stable performance.
Capable of operating at high temperatures without compromising functionality.
Can function in cold environments, making it versatile for different application scenarios.
Dual terminal position provides redundancy, increasing reliability in signal termination.
Low profile design allows for compact installation and efficient use of space on the PCB.
Narrow width enables easy integration into existing circuit layouts.
Optimal length for accommodating the required number of terminals and components in the terminator.
Suitable for standard commercial applications, ensuring compatibility with most systems.
Provides the correct resistance for signal termination, optimizing signal integrity.
Bipolar technology offers high-speed performance and reliability in signal termination.
Gull wing terminals facilitate easy soldering and provide secure connections on the PCB.
Supports multiple signal lines for effective termination of data bus signals.
Optimal supply voltage for stable operation and efficient signal termination.
Close terminal pitch allows for compact design and efficient signal routing on the PCB.
Specifically designed for SCSI bus termination, ensuring compatibility and optimal performance in SCSI systems.
Data Bus Terminators UC5612PWP attributes and parameters. Explore more Data Bus Terminators devices from Texas Instruments
Differential Output:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Signal Lines:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Nominal Pull Up Resistance:
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
UC5612PWP Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Fagor Electronica S Coop
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Microsemi
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
First Components International
MMBF170LT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
ROHM
UCC5606PWPG4
UCC5606PWPG4 by Texas Instruments is a SCSI bus terminator with 24 terminals, 3.3V supply, and 110 ohm pull-up resistance. It operates b/w 0-70°C and has a compact rectangular package suitable for data bus applications. The BICMOS technology and dual terminal position make it ideal for high-speed signal lines in commercial-grade systems.
DS2112S
Maxim Integrated
Bus Terminators; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX13175EETU+T
Analog Devices
MAX13175EETU+T by Analog Devices is a BUS TERMINATOR SUPPORT CIRCUIT with 6 signal lines. It operates b/w -40 to 85 °C and has a supply voltage range of 3.135V to 5.5V, drawing a max current of 5.9mA. Ideal for data bus termination applications in various electronic devices.
74F1071MTCX
National Semiconductor
74F1071MTCX by National Semiconductor is a Data Bus Terminator with a small outline, thin profile package style. It features 20 terminals in gull wing form with 0.65 mm pitch. This diode bus termination array has a max seated height of 1.1 mm and is ideal for surface mount applications in electronic devices.
UC5608J
UC5608J by Texas Instruments is a SCSI bus terminator with 18 signal lines. It operates b/w 0-70°C, with supply voltage range of 3.8-5.25V and pull-up resistance of 110Ω. Ideal for commercial applications requiring reliable data bus termination in a compact IN-LINE package style.
UC5601DWPTRG4
UC5601DWPTRG4 by Texas Instruments is a Data Bus Terminator with 28 terminals, operating at 0-70°C. It features a supply voltage range of 4-5.25V and pull-up resistance of 110Ω. Ideal for SCSI bus termination applications due to its bipolar technology and small outline package style.
MAX3407EUK-T
OTHER TERMINATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
LP2998MR/NOPB
LP2998MR/NOPB by Texas Instruments is a Data Bus Terminator with 2.2-5.5V supply voltage range, -40 to 125°C operating temperature, and 1.27mm terminal pitch. Ideal for automotive applications requiring small outline, low profile packages with dual terminals and gull wing form factor.
UC5601NG4
UC5601NG4 by Texas Instruments is a SCSI bus terminator with 18 signal lines. It operates b/w 0-70°C, with supply voltage of 4-5.25V. This rectangular package has 24 terminals and nominal pull-up resistance of 110Ω, ideal for data bus termination applications.
S21S07ACTR
STMicroelectronics
S21S07ACTR by STMicroelectronics is a compact SCSI bus terminator designed for efficient data communication. It operates b/w 4V and 5.5V, with a max temp of 70 °C and features 20 terminals in a thin profile package. Ideal for enhancing signal integrity in high-speed applications.
LTC1344IG
LTC1344IG by Analog Devices is a Data Bus Terminator with 24 terminals, CMOS technology, and a max supply voltage of 5.25V. It is used in industrial applications for terminating signal lines with a nominal pull-up resistance of 104 ohm.
UCC5672PWPR/1
UCC5672PWPR/1 by Texas Instruments is a Data Bus Terminator with 28 terminals, operating at 3.3V nominal voltage and supporting SCSI interface. It features BICMOS technology, differential output, and a max supply voltage of 5.25V. Ideal for commercial applications requiring thin profile components with dual terminal position.
DS21T09S/T&R
SCSI BUS TERMINATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
UCC5621FQP
UCC5621FQP by Texas Instruments is a SCSI bus terminator with 27 signal lines and 110 ohm pull-up resistance. It operates b/w 0-70°C, with a supply voltage range of 4-7V. This BICMOS technology device comes in a low-profile flatpack package suitable for commercial applications.
UCC5621MWPG4
UCC5621MWPG4 by Texas Instruments is a SCSI bus terminator with 27 signal lines and 110 ohm pull-up resistance. It operates b/w 0-70°C, with supply voltage ranging from 4-7V. This BICMOS technology device comes in a small outline package for surface mounting applications.
UCC5510MWPG4
UCC5510MWPG4 by Texas Instruments is a SCSI bus terminator with 36 terminals, operating at 3.3V nominal voltage and supporting 9 signal lines. It features a BICMOS technology, differential output, and nickel palladium gold terminal finish. This small outline package is ideal for data bus termination applications in commercial temperature environments up to 70°C.
UCC5672PWPR/1G4
UCC5672PWPR/1G4 by Texas Instruments is a SCSI bus terminator with 28 terminals, operating at 3.3V nominal voltage and supporting differential output. It features a small outline package style, dual terminal position, and BICMOS technology. Ideal for data bus termination applications in commercial-grade environments with temperatures ranging from 0 to 70°C.
UC5608DWPTR/81168
UC5608DWPTR/81168 by Texas Instruments is a Data Bus Terminator with 28 terminals, operating at 0-70°C. It features a supply voltage range of 4-5.25V and pull-up resistance of 110Ω. Ideal for SCSI bus termination applications due to its bipolar technology and Gull Wing terminal form.
SDA12N8TC
Diodes Incorporated
DIODE BUS TERMINATION ARRAY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
UCC5680PW24TRG4
UCC5680PW24TRG4 by Texas Instruments is a SCSI bus terminator with 24 terminals and BICMOS technology. It operates b/w 0 to 70°C, with a supply voltage range of 2.7V to 5.25V. This small outline package is ideal for data bus termination applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
UC5603DPR
SCSI BUS TERMINATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
UC5601QPTR
SCSI BUS TERMINATOR; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
UC5603DP
UC5602DWPTR
UC5601QP
UC5603DPRTR
UC5601DWPG4
UC5602DWP
UC5601J
SCSI BUS TERMINATOR; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
UC5602QPTR
UC5602N
UC5603DPG4
UC5601DWPTR
UC5601QPR
UC5601DWP
UC5601DWPR
UC5601N
UC5602QP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved