Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTJD5121NT2G by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage, 0.295A max drain current, and 1.6 ohm max on resistance. Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temperature.
Median Price
$0.076
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.430
100+ parts
$0.167
1k+ parts
$0.111
10k+ parts
-
Mouser Electronics
$0.087
Farnell
$0.071
Avnet
Arrow
$0.069
Verical
$0.077
Rochester
$0.064
$0.057
Digiode
$0.060
Nova Conductors
$0.096
Chip Stock
Vyrian
Avant Electronics Limited
Ampacity Inc.
$0.054
Semicontronic
$0.053
$0.052
Corphita
Corohmni
$0.063
Argo Parts USA
$0.093
Continental Prestige Electronics
$0.094
Advanced Electronics
$0.779
$0.709
$0.639
RC Electronics
Perfect Parts
Lixinc
SupplyDigital Components
TANS Electronics
Problanco Electronics
Kulean Microsystems
UHIMA Technologies
Netroflash
$0.091
$0.089
Formix International (Excess)
This material is durable and provides good protection for the internal components of the transistor, ensuring a longer lifespan.
N-channel transistors typically have better performance and higher efficiency compared to P-channel transistors, making them a preferred choice for many applications.
Designed specifically for switching applications, this transistor is optimized for efficient and fast switching operations.
With a high breakdown voltage, this transistor can handle higher voltages without risk of failure, making it suitable for a variety of applications.
Surface mount technology allows for easy and compact installation on PCBs, saving space and improving overall system performance.
The high maximum drain current rating ensures that the transistor can handle higher current loads without overheating or failing, making it reliable for various applications.
With a high maximum operating temperature, this transistor can withstand higher temperatures without performance degradation, ensuring reliable operation in harsh environments.
Low on-resistance results in minimal power loss and improved efficiency during operation, making this transistor suitable for high-performance applications.
Small Signal Field Effect Transistors (FET) NTJD5121NT2G attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Additional Features:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
NTJD5121NT2G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev A/Mat Chg 14/May/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Changzhou Starsea Electronics
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Hy Electronic
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
Continental Device India
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDC8602
The Onsemi FDC8602 is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for SWITCHING applications. It features 1.2A max drain current, 0.35 ohm max on resistance, and 5pF feedback capacitance. With GULL WING terminals and ENHANCEMENT MODE operation, it's designed for surface mount in small outline packages.
MMBFJ112
National Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: Tin/Lead (Sn/Pb); Transistor Application: SWITCHING;
BSS123
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Time At Peak Reflow Temperature (s): 40; Maximum Drain Current (Abs) (ID): .17 A;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BS170
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Terminal Form: THROUGH-HOLE; Terminal Finish: TIN LEAD;
SI2369DS-T1-GE3
Vishay Intertechnology
SI2369DS-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET with 30V DS Breakdown Voltage and 7.6A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 0.029 ohm On Resistance. This SMALL OUTLINE transistor has a max power dissipation of 2.5W and can withstand temperatures from -55 to 150°C.
BSS138W
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Transistor Element Material: SILICON; Transistor Application: SWITCHING;
NDS356AP
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Terminal Position: DUAL; Maximum Time At Peak Reflow Temperature (s): 30;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: WIRE; No. of Terminals: 3; Maximum Feedback Capacitance (Crss): 5 pF;
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Minimum DS Breakdown Voltage: 100 V; Qualification: Not Qualified;
FDS6679AZ
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Position: DUAL; JESD-609 Code: e3;
MMBF170-7-F
Diodes Incorporated
Diodes Inc.'s MMBF170-7-F is a N-channel FET with 60V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.3W power dissipation and -55 to 150°C operating temperature range, it offers reliable performance in small outline packages.
2N7000BU
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; JESD-609 Code: e3; Operating Mode: ENHANCEMENT MODE;
IRLL110TRPBF
Vishay Intertechnology's IRLL110TRPBF is a N-CHANNEL FET for SWITCHING applications. It features a 100V DS Breakdown Voltage, 12A IDM, and 0.76 ohm RDS(on). With a max power dissipation of 3.1W and operating temperature up to 150°C, it is ideal for high-performance electronic devices requiring efficient switching capabilities.
FDC640P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY;
BSS123-G
Small Signal Field-Effect Transistors; Terminal Finish: Matte Tin (Sn) - annealed; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
NTJD4401NT1G
NTJD4401NT1G by Onsemi is a N-CHANNEL FET with 2 elements, diode, and resistor. It operates in enhancement mode for switching applications. With a max drain current of 0.63A and on resistance of 0.375 ohm, it's ideal for small outline packages in high-temp environments up to 150°C.
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 100 V;
BC548B
Jiangsu Changjiang Electronics Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTJD4001NT1G
NTJD4001NT1G by Onsemi is a N-CHANNEL FET with 2 elements, diode, and resistor. It operates in enhancement mode for switching applications. Features include 30V DS breakdown voltage, 0.25A drain current, and 2.5 ohm on resistance. Ideal for small outline packages in high-temp environments up to 150°C.
NTJD5121NT1G
NTJD5121NT1G by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage, 0.295A max drain current, and 1.6 ohm max on resistance. Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C.
NTJD1155LT1G
NTJD1155LT1G by Onsemi is a Small Signal FET with N/P-Channel, ideal for switching applications. It features 8V DS Breakdown Voltage, 1.3A Drain Current, and 0.175ohm On Resistance. Operating from -55 to 150°C, it comes in a small outline package with Gull Wing terminals for surface mount assembly.
NTJD4152PT1G
NTJD4152PT1G by Onsemi is a P-CHANNEL FET with 2 elements, diode, and resistor for SWITCHING applications. It features a Min DS Breakdown Voltage of 20V, Max Drain Current of 0.88A, and Max Power Dissipation of 0.35W. This small outline transistor operates in an ENHANCEMENT MODE at temperatures ranging from -55 to 150°C.
NTJD4105CT1G
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Maximum Drain-Source On Resistance: .375 ohm; Maximum Operating Temperature: 150 Cel;
NTJD4158CT1G
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .27 W; Maximum Operating Temperature: 150 Cel; Package Shape: RECTANGULAR;
NTJD4105CT2G
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY;
NTJD1155LT2G
N-CHANNEL AND P-CHANNEL; Configuration: COMPLEX; Surface Mount: YES; Maximum Power Dissipation (Abs): .4 W; Terminal Finish: MATTE TIN; Transistor Element Material: SILICON;
NTJD1155LT1
N-CHANNEL AND P-CHANNEL; Configuration: COMPLEX; Surface Mount: YES; Maximum Power Dissipation (Abs): .4 W; Operating Mode: ENHANCEMENT MODE; Package Body Material: PLASTIC/EPOXY;
NTJD4105CT1
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Maximum Drain Current (ID): .63 A; Maximum Operating Temperature: 150 Cel;
NTJD4105CT2
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Terminal Form: GULL WING; JESD-609 Code: e0;
NTJD4105CT4
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Maximum Feedback Capacitance (Crss): 5 pF; Qualification: Not Qualified;
NTJD4105CT4G
NTJD4105CT4G by Onsemi is a Small Signal FET with N/P-Channel, 2 elements, diode, and resistor. It operates in enhancement mode for switching applications. Features include 1.1A max drain current, 0.375 ohm RDS(on), and 150°C max temp making it ideal for various electronic circuits.
NTJD4152PT2G
NTJD4152PT2G by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage, 0.88A ID, and 0.26 ohm RDS(ON). Ideal for SWITCHING applications, it features 2 elements with built-in diode and resistor in a small outline package. Operating from -55 to 150 °C, it's designed for surface mount with GULL WING terminals.
NTJD2152PT2G
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Transistor Application: SWITCHING; No. of Elements: 2;
NTJD4001NT1
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .272 W; Terminal Position: DUAL; Peak Reflow Temperature (C): 235;
NTJD4001NT2G
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .272 W; Maximum Operating Temperature: 150 Cel; Maximum Feedback Capacitance (Crss): 12 pF;
NTJD2101PT1
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved