Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTHD4P02FT1 by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 9A Max IDM and 0.155 ohm RDS(ON), operating in -55 to 150 °C temperature range. This SMALL OUTLINE transistor has a built-in diode, suitable for surface mount configurations.
Median Price
$0.122
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.132
1k+ parts
$0.110
10k+ parts
$0.098
DigiKey
Verical
Vyrian
$0.085
Digiode
$0.103
Cyclops Electronics Ltd
Corel Iberica Componentes, S.L.
ACDS - Activité Composants Distribution Service
Prism Electronics
Ampacity Inc.
$0.072
Corohmni
Corphita
$0.097
Component Stockers USA
$0.100
$0.090
Continental Prestige Electronics
Metaverse IC Inc.
TANS Electronics
Assy Fe
Kepictronics
Perfect Parts
Kulean Microsystems
ChipstoGo Electronic ltd
A-Z Elektronik GmbH
SupplyDigital Components
Cyclops Electronics Ltd (Excess)
Problanco Electronics
UHIMA Technologies
This material provides durability and protection for the internal components, making the product reliable for long-term use.
P-channel FETs generally have lower on-state resistance and are suitable for applications where low power consumption is key.
The built-in diode allows for more efficient switching and protection against voltage spikes, enhancing the overall performance of the product.
Designed specifically for switching applications, this FET can efficiently control the flow of current, making it ideal for various electronic devices.
The surface mount capability makes installation easier and saves space on the circuit board, making it a versatile choice for compact designs.
With a minimum breakdown voltage of 20V, this FET can handle higher voltages without damage, ensuring reliable operation in different voltage scenarios.
The high pulsed drain current capacity makes this FET suitable for applications that require short bursts of high current, providing versatility in power handling.
With a maximum power dissipation of 1.1W, this FET can effectively handle power in moderate to high-power applications, ensuring efficient performance.
The high maximum operating temperature of 150 °C allows this FET to withstand elevated temperatures without compromising its performance, making it suitable for harsh environments.
Power Field Effect Transistors (FET) NTHD4P02FT1 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Maximum Turn Off Time (toff):
Maximum Turn On Time (ton):
NTHD4P02FT1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Fairchild Semiconductor
IRF7341TRPBF
Infineon Technologies
Infineon's IRF7341TRPBF is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 42A IDM, 140mJ EAS, and 0.05 ohm RDS(on). With a max power dissipation of 2W and operating temperature up to 150°C, it suits various high-power electronic designs.
FDD6685
FDD6685 by Onsemi is a P-CHANNEL Power FET with 30V DS Breakdown Voltage and 11A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, GULL WING terminals, and operates in ENHANCEMENT MODE. With a max power dissipation of 52W and peak reflow temperature of 260°C, it offers reliable performance in various electronic devices.
MRF151G
TE Connectivity
TE Connectivity's MRF151G is a N-CHANNEL FET with 40A ID and 500W power dissipation. Ideal for high-power applications, it operates in enhancement mode with a max temp of 150°C.
FDD4243
The Onsemi FDD4243 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, 60A IDM, and 0.064 ohm RDS. Ideal for power management applications due to its high current handling capability and low on-resistance. Suitable for use in various electronic devices requiring efficient power control in compact designs.
IRLML0030TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; No. of Terminals: 3; Transistor Element Material: SILICON;
FDMS86300DC
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Peak Reflow Temperature (C): 260; No. of Elements: 1;
FDD4685-F085
FDD4685-F085 by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 100A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.027 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it has a max power dissipation of 69W and can withstand temperatures up to 175°C.
IRF3205STRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 200 W; Minimum DS Breakdown Voltage: 55 V; Additional Features: AVALANCHE RATED, HIGH RELIABILITY, ULTRA LOW RESISTANCE;
SI7461DP-T1-GE3
Vishay Intertechnology
Vishay Intertechnology's SI7461DP-T1-GE3 is a P-CHANNEL FET with 60V DS Breakdown Voltage, 8.6A Drain Current, and 0.0145 ohm On Resistance. Ideal for power management applications due to its 60A Pulsed Drain Current capability and 125mJ Avalanche Energy Rating in a small outline package.
PSMN4R8-100BSEJ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 405 W; Maximum Pulsed Drain Current (IDM): 707 A; Terminal Form: GULL WING;
IRF9530
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Operating Temperature: 150 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SI7489DP-T1-GE3
Vishay Intertechnology's SI7489DP-T1-GE3 is a P-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 40A IDM, 61mJ EAS, and 0.041 ohm Drain-Source On Resistance. Operating in Enhancement Mode, it has a max temp of 150°C and -55°C min temp.
IRF7328TRPBF
Infineon's IRF7328TRPBF is a P-CHANNEL FET for SWITCHING applications. It features 30V DS Breakdown Voltage, 32A IDM, and 0.021 ohm RDS(on). With a max power dissipation of 2W and operating temperature up to 150°C, it's ideal for high-performance electronic systems requiring efficient power management in compact designs.
STY60NK30Z
STY60NK30Z by STMicroelectronics is a N-CHANNEL FET with 300V DS Breakdown Voltage, ideal for SWITCHING applications. It features 240A IDM and 0.045 ohm RDS(on), operating in ENHANCEMENT MODE at up to 150°C. The transistor comes in a RECTANGULAR package with Matte Tin finish, offering high power dissipation of 450W.
JANTX2N6796
Omnirel
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; JESD-30 Code: O-MBCY-W3; Terminal Finish: Tin/Lead (Sn/Pb);
NDT3055L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Shape: RECTANGULAR; Maximum Pulsed Drain Current (IDM): 25 A;
IRFR4620TRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 144 W; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
AUIRF5210STRL
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Maximum Pulsed Drain Current (IDM): 140 A; Transistor Element Material: SILICON;
BSZ067N06LS3GATMA1
Infineon BSZ067N06LS3GATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 80A IDM, 118mJ EAS, and 0.0121 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max temp of 150°C and DUAL terminal position for efficient power management.
IRF540NSTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 130 W; Avalanche Energy Rating (EAS): 185 mJ; JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTHD3100CT1G
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.1 W; Maximum Drain Current (Abs) (ID): 3.2 A; Maximum Time At Peak Reflow Temperature (s): 30;
NTHD3102CT1G
NTHD3102CT1G by Onsemi is a Power FET with N-CHANNEL and P-CHANNEL types, 2 elements with built-in diode. It operates in switching applications, offering a max pulsed drain current of 16A and min DS breakdown voltage of 20V. Ideal for surface mount designs, it has a small outline package style and can handle up to 150°C operating temperature.
NTHD4502NT1G
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.13 W; Operating Mode: ENHANCEMENT MODE; Moisture Sensitivity Level (MSL): 1;
NTHD4508NT1G
NTHD4508NT1G by Onsemi is a N-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 3.1A Drain Current, 0.075 ohm On Resistance, and 12A Pulsed Drain Current. Operating in ENHANCEMENT MODE, it has a max temp of 150°C and fast switching times of 40ns turn on and 26ns turn off.
NTHD2102PT1
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.1 W; Terminal Form: C BEND; Peak Reflow Temperature (C): 235;
NTHD2102PT1G
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.1 W; Maximum Drain-Source On Resistance: .058 ohm; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NTHD3100CT1
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.1 W; Package Shape: RECTANGULAR; Minimum DS Breakdown Voltage: 20 V;
NTHD3100CT3
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.1 W; Maximum Drain-Source On Resistance: .08 ohm; Maximum Drain Current (Abs) (ID): 3.2 A;
NTHD3100CT3G
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.1 W; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
NTHD3101FT1
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 20 V; Maximum Drain-Source On Resistance: .08 ohm;
NTHD3101FT1G
NTHD3101FT1G by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage and 3.2A max drain current. Ideal for switching applications, it features a built-in diode, 0.08 ohm RDS(on), and operates in enhancement mode. Suitable for surface mount with 8 terminals, it can handle up to 13A pulsed drain current.
NTHD3101FT3
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Peak Reflow Temperature (C): 235; Maximum Pulsed Drain Current (IDM): 13 A;
NTHD3101FT3G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Transistor Element Material: SILICON; Package Body Material: UNSPECIFIED;
NTHD3102CT1
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Maximum Drain Current (ID): 4.4 A; Minimum DS Breakdown Voltage: 20 V;
NTHD4508NT1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.13 W; No. of Elements: 1; Terminal Position: DUAL;
NTHD4P02FT1G
NTHD4P02FT1G by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage and 2.2A Drain Current. Ideal for SWITCHING applications, it features a 37ns Turn On Time, -55 to 150°C Operating Temperature range, and a compact SMALL OUTLINE package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved