Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDS3890 by Onsemi is a N-CHANNEL Power FET with 80V DS Breakdown Voltage and 20A IDM. Ideal for SWITCHING applications, it features a SEPARATE configuration with 2 ELEMENTS, built-in DIODE, and 0.044 ohm Drain-Source On Resistance. The transistor operates in ENHANCEMENT MODE, has a max power dissipation of 2W, and can withstand temperatures up to 175°C.
Median Price
$1.610
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Farnell
1+ parts
100+ parts
$0.929
1k+ parts
$0.678
10k+ parts
$0.664
Element14
$2.530
$1.660
$1.210
$1.190
DigiKey
$3.130
$1.391
$1.121
-
Mouser Electronics
$1.400
Newark
$3.200
$1.600
$1.290
$1.240
Chip1Stop
$0.744
Arrow
$0.871
Verical
$0.876
Rochester
$1.000
$0.833
$0.743
Digiode
$0.782
Nova Conductors
$1.372
TEDSS.com
$2.000
Component Electronics Inc.
$5.380
$4.040
$3.500
ComSIT Distribution GmbH
ComSIT USA
Vyrian
Chip Stock
Flip Electronics
Freddi Giovanni
Sensible Micro Corp
Bristol Electronics
Technoshack Inc.
Resion
North Shore Components
NAC Semi
Corohmni
$0.573
Benley Electronics
$0.590
Semicontronic
$0.630
$0.614
$0.611
Ampacity Inc.
Aztec Data Supply Inc.
$0.699
Corphita
$0.741
Aranea Global
$1.345
$1.291
Argo Parts USA
Continental Prestige Electronics
Advanced Electronics
$1.473
$1.399
Component Stockers USA
$1.710
$1.160
$0.830
Microchip USA
$5.514
Perfect Parts
Eastek
TANS Electronics
SupplyDigital Components
Futuretech Components
Authorized Procurement Solutions
Kulean Microsystems
Kepictronics
Problanco Electronics
UHIMA Technologies
Supply Digital
GreenTree Electronics
Speed Components Ltd (Excess)
The plastic/epoxy material used for the package body provides good insulation and protection for the internal components of the FET.
N-channel FETs generally have lower on-resistance and faster switching speeds compared to P-channel FETs, making them suitable for high-performance applications.
This configuration allows for more flexibility in circuit design and the built-in diode provides protection against reverse voltage.
Designed specifically for switching applications, ensuring efficient operation in such scenarios.
Enables easy and convenient installation on circuit boards, saving space and facilitating automated assembly processes.
With a high breakdown voltage, this FET can handle higher voltages without breakdown, ensuring reliable performance in demanding environments.
Capable of carrying high drain currents, making it suitable for power applications.
The FET can dissipate up to 2 watts of power without overheating, ensuring stable operation under load.
Can operate at high temperatures without performance degradation, suitable for industrial and automotive applications.
Low on-resistance leads to minimal power loss and efficient switching performance.
Power Field Effect Transistors (FET) FDS3890 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDS3890 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5961-01-645-1470, 5961016451470
NIIN
016451470
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1554216004
Molex
WIRE AND CABLE;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Continental Device India
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
IRF540ZPBF
Infineon Technologies
Infineon's IRF540ZPBF is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 140A IDM and 0.0265 ohm RDS(on), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with DRAIN connection and built-in DIODE makes it suitable for high-power circuits.
CSD18531Q5AT
CSD18531Q5AT by Texas Instruments is a N-CHANNEL FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 19A Drain Current, and 0.0058 ohm On Resistance. With an operating range of -55 to 150 °C, it's ideal for power management in various electronic devices.
G3R160MT12D
Genesic Semiconductor
Power Field-Effect Transistors;
IRLML2502TRPBF
IRLML2502TRPBF by Infineon Technologies is a N-CHANNEL power FET with a min DS breakdown voltage of 20V. It is used for switching applications and has a max drain current of 4.2A.
AUIRF7759L2TR
International Rectifier
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Maximum Drain Current (ID): 375 A; No. of Elements: 1;
FDD86102LZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 54 W; JESD-30 Code: R-PSSO-G2; Maximum Drain Current (ID): 8 A;
IRF640
Comset Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JEDEC-95 Code: TO-220AB; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Transistor Element Material: SILICON;
STY60NK30Z
STMicroelectronics
STY60NK30Z by STMicroelectronics is a N-CHANNEL FET with 300V DS Breakdown Voltage, ideal for SWITCHING applications. It features 240A IDM and 0.045 ohm RDS(on), operating in ENHANCEMENT MODE at up to 150°C. The transistor comes in a RECTANGULAR package with Matte Tin finish, offering high power dissipation of 450W.
DMP3056LDM-7
Diodes Incorporated
DMP3056LDM-7 by Diodes Inc. is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 13A IDM, 0.045 ohm RDS(on), and 150°C Max Operating Temp. Its GULL WING terminals and SMALL OUTLINE package make it suitable for surface mount designs.
SQJ431EP-T1_GE3
Vishay Intertechnology
Vishay Intertechnology's SQJ431EP-T1_GE3 is a P-CHANNEL FET with 200V DS Breakdown Voltage, 40A IDM, and 0.221 ohm RDS(ON). Ideal for power applications requiring high drain current and low on-resistance in a small outline package.
BSP318SH6327XTSA1
Infineon's BSP318SH6327XTSA1 is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 10.4A Pulsed Drain Current. Ideal for automotive applications, it features a built-in diode, 0.15 ohm On Resistance, and 260°C Peak Reflow Temperature.
IRLML6346TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
FDMC86139P
Onsemi
FDMC86139P by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.067 ohm RDS(on), and operates in ENHANCEMENT MODE.
BSP316PH6327XTSA1
BSP316PH6327XTSA1 by Infineon is a P-CHANNEL FET with 100V DS breakdown voltage, ideal for power applications. It features single configuration with built-in diode, 2.72A max pulsed drain current, and 1.8ohm max drain-source resistance. Suitable for enhancement mode operation in automotive electronics due to AEC-Q101 compliance.
FDD6685
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 52 W; Qualification: Not Qualified; JESD-30 Code: R-PSSO-G2;
BSC030P03NS3GXT
BSC030P03NS3GXT by Infineon is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features 200A IDM, 345mJ EAS, and 0.0046 ohm RDS(ON). With ENHANCEMENT MODE operation and -55 to 150 °C temperature range, it offers high performance in a SMALL OUTLINE package.
ZXMP10A18GTA
Zetex Plc
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.9 W; Operating Mode: ENHANCEMENT MODE; Package Style (Meter): SMALL OUTLINE;
FDS3890
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
IRLML6401
IRLML6401 by International Rectifier is a P-CHANNEL FET with 12V DS Breakdown Voltage and 34A IDM. Ideal for SWITCHING applications, it features a built-in diode, 33mJ EAS rating, and -55 to 150 °C operating temperature range.
IRLL024NTRPBF
IRLL024NTRPBF by Infineon Technologies is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 3.1A Max Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 12A Pulsed Drain Current, and 0.065 ohm On Resistance. Suitable for surface mount with GULL WING terminals in a SMALL OUTLINE package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDS3672
FDS3672 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 7.5A Drain Current. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, this transistor has an EAS of 416mJ and 0.023 ohm RDS(on).
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Element Material: SILICON;
FDS3672_NL
FDS3672_NL by Fairchild Semiconductor is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 7.5A Drain Current, 0.023 ohm On Resistance, and 150°C Operating Temperature. Package: PLASTIC/EPOXY, GULL WING terminals in RECTANGULAR shape.
FDS3890_NL
FDS3890_NL by Fairchild Semiconductor is a N-CHANNEL Power FET with 80V DS Breakdown Voltage. It features 2 elements with built-in diode for SWITCHING applications, offering 20A IDM and 0.044 ohm RDS(on). This small outline transistor in plastic/epoxy package is ideal for high-current switching circuits.
FDS3692
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Drain Current (Abs) (ID): 4.5 A; No. of Terminals: 8;
FDS3692 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a single configuration with built-in diode, GULL WING terminals, and 0.06 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, it has a max Drain Current of 4.5A and can handle up to 2.5W power dissipation at 150°C temperature.
FDS3992
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; JESD-609 Code: e3; Package Style (Meter): SMALL OUTLINE;
FDS3992 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 4.5A Drain Current. Ideal for SWITCHING applications, it features a PLASTIC/EPOXY package, GULL WING terminals, and operates in ENHANCEMENT MODE. With a max power dissipation of 2.5W and an operating temperature range from -55 to 150 °C, it offers reliable performance in various electronic systems.
FDS3572
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Transistor Element Material: SILICON; Avalanche Energy Rating (EAS): 515 mJ;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Terminals: 8; Package Shape: RECTANGULAR;
FDS3572_NL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; No. of Terminals: 8; Terminal Position: DUAL;
FDS3992_NL
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Transistor Application: SWITCHING; Minimum DS Breakdown Voltage: 100 V;
FDS3601
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
FDS3912
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (ID): 3 A;
FDS3812D84Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: .074 ohm; Avalanche Energy Rating (EAS): 90 mJ; Terminal Position: DUAL;
FDS3812F011
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain-Source On Resistance: .074 ohm; JESD-30 Code: R-PDSO-G8;
FDS3812_NL
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; JESD-609 Code: e3; No. of Terminals: 8;
FDS3890L99Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G8; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Position: DUAL;
FDS3890S62Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Avalanche Energy Rating (EAS): 175 mJ; Maximum Drain-Source On Resistance: .044 ohm; Maximum Pulsed Drain Current (IDM): 20 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved