Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTHD3100CT3 by Onsemi is a Power FET with N-CHANNEL and P-CHANNEL configurations, ideal for SWITCHING applications. It features 2 elements with built-in diode, 20V DS Breakdown Voltage, and 0.08 ohm Drain-Source Resistance. This small outline transistor has a max power dissipation of 1.1W and operates at up to 150 °C temperature.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$21.260
Component Stockers USA
$99.990
SupplyDigital Components
Kulean Microsystems
TANS Electronics
UHIMA Technologies
Corphita
Corohmni
Problanco Electronics
Having both N-channel and P-channel types allows for flexibility in circuit design and compatibility with various applications.
The separate configuration with built-in diode enhances efficiency and protection within the circuitry.
Designed specifically for switching applications, ensuring reliable performance in on/off states.
The surface mount feature allows for easy and efficient integration onto PCBs, saving space and simplifying assembly processes.
The minimum breakdown voltage ensures safe operation within specified voltage ranges.
The rectangular package shape provides a compact design for space-constrained applications.
Operating in enhancement mode allows for better control over the transistor's conductance, enabling precise switching capabilities.
Having 2 elements provides redundancy and increased reliability in the circuit design.
The high maximum pulsed drain current capability ensures the transistor can handle peak current demands without damage.
The maximum drain current capacity of 3.2 A allows for handling substantial current loads within specified limits.
Having 8 terminals provides a secure connection and versatile wiring options for different circuit configurations.
The maximum power dissipation rating of 1.1 W ensures efficient heat dissipation and prevents overheating during operation.
The small outline package style saves space in the circuit design and allows for compact installations.
The MOSFET technology offers high performance and efficiency in switching applications compared to other transistor technologies.
With a maximum operating temperature of 150 °C, the transistor can withstand high-temperature environments without compromising performance.
Silicon material ensures stable and reliable transistor operation over a wide temperature range.
The tin lead terminal finish provides good solderability and ensures a secure connection in the circuit.
The low drain-source on resistance of 0.08 ohms minimizes power loss and improves efficiency in switching applications.
The dual terminal position allows for flexibility in circuit board layout and connection options.
With a peak reflow temperature of 235 °C, the transistor can withstand high-temperature soldering processes without damage.
Power Field Effect Transistors (FET) NTHD3100CT3 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
NTHD3100CT3 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Multiple Devices 06/Oct/2006
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Surge Components
IRFZ44NS
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 94 W; Maximum Drain Current (ID): 49 A; Terminal Position: SINGLE;
FDMS86101
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Minimum DS Breakdown Voltage: 100 V; Terminal Position: DUAL;
IRF9Z34NSTRLPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: SINGLE; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Additional Features: AVALANCHE RATED, HIGH RELIABILITY;
BSP170PH6327XTSA1
Infineon Technologies
Infineon's BSP170PH6327XTSA1 is a P-CHANNEL FET with 60V DS Breakdown Voltage, 7.6A IDM, and 0.3 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance and 150°C max operating temp.
IRF9530
Intersil
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Avalanche Energy Rating (EAS): 500 mJ; No. of Elements: 1;
FDBL86062_F085
Fairchild Semiconductor's FDBL86062_F085 is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 300A Drain Current. Ideal for SWITCHING applications, it features an EAS of 352mJ, 0.002 ohm On Resistance, and operates in ENHANCEMENT MODE.
FDMS86350ET80
The Onsemi FDMS86350ET80 is a N-CHANNEL Power FET with 80V DS Breakdown Voltage and 693A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.0024 ohm RDS(on), and operates in ENHANCEMENT MODE.
IRF1010NSTRLPBF
IRF1010NSTRLPBF by Infineon Technologies is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 290A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has 0.011 ohm Drain-Source On Resistance and can handle up to 170W power dissipation.
AUIRFR5305TR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Maximum Drain-Source On Resistance: .065 ohm; JEDEC-95 Code: TO-252AA;
FDD4685
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 69 W; Maximum Operating Temperature: 150 Cel; Maximum Feedback Capacitance (Crss): 205 pF;
AUIRF540Z
AUIRF540Z by Infineon Technologies is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for switching applications. It features 140A max pulsed drain current and 0.0265 ohm max drain-source resistance. Operating in enhancement mode, it has a 175°C max temp rating and 92W power dissipation capability.
FDD4243-F085
FDD4243-F085 by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 24A, 0.044 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE. With a package style of SMALL OUTLINE and operating temperature range from -55 to 175 °C, it meets AEC-Q101 standards for automotive use.
NCV8406ASTT1G
NCV8406ASTT1G by Onsemi is an N-CHANNEL FET for SWITCHING applications. It features a 60V DS Breakdown Voltage, 0.24 ohm Drain-Source On Resistance, and 1.81W Power Dissipation. With a PLASTIC/EPOXY body and GULL WING terminals, it operates in temperatures from -40 to 150 °C.
IRF5305PBF
IRF5305PBF by Infineon is a P-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 110A IDM and 0.06 ohm RDS(ON), suitable for high-power circuits. With a max power dissipation of 110W and operating temperature up to 175°C, it ensures reliable performance in various environments.
PSMN4R8-100BSE
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 405 W; Terminal Position: SINGLE; Peak Reflow Temperature (C): 260;
FDB33N25TM
FDB33N25TM by Onsemi is a N-CHANNEL Power FET with 250V DS Breakdown Voltage and 33A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 132A Pulsed Drain Current, and 0.094 ohm On Resistance. The transistor operates in ENHANCEMENT MODE with a max power dissipation of 235W in a small outline package style.
FDD4141
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 69 W; Terminal Finish: MATTE TIN; Terminal Position: SINGLE;
SUM110P06-08L-E3
Vishay Intertechnology
Vishay Intertechnology's SUM110P06-08L-E3 is a P-channel FET with 60V DS breakdown voltage and 200A IDM. Ideal for switching applications, it features a single configuration with built-in diode, 0.008 ohm max RDS(on), and 272W max power dissipation.
FDMS86163P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 100 V;
SI7415DN-T1-GE3
SI7415DN-T1-GE3 by Vishay Intertechnology is a P-CHANNEL power FET with a min DS breakdown voltage of 60V. It is used for switching applications and has a max drain current of 3.6A and max power dissipation of 3.8W.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTHD3100CT1G
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.1 W; Maximum Drain Current (Abs) (ID): 3.2 A; Maximum Time At Peak Reflow Temperature (s): 30;
NTHD3102CT1G
NTHD3102CT1G by Onsemi is a Power FET with N-CHANNEL and P-CHANNEL types, 2 elements with built-in diode. It operates in switching applications, offering a max pulsed drain current of 16A and min DS breakdown voltage of 20V. Ideal for surface mount designs, it has a small outline package style and can handle up to 150°C operating temperature.
NTHD4502NT1G
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.13 W; Operating Mode: ENHANCEMENT MODE; Moisture Sensitivity Level (MSL): 1;
NTHD4508NT1G
NTHD4508NT1G by Onsemi is a N-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 3.1A Drain Current, 0.075 ohm On Resistance, and 12A Pulsed Drain Current. Operating in ENHANCEMENT MODE, it has a max temp of 150°C and fast switching times of 40ns turn on and 26ns turn off.
NTHD2102PT1
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.1 W; Terminal Form: C BEND; Peak Reflow Temperature (C): 235;
NTHD2102PT1G
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.1 W; Maximum Drain-Source On Resistance: .058 ohm; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NTHD3100CT1
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.1 W; Package Shape: RECTANGULAR; Minimum DS Breakdown Voltage: 20 V;
NTHD3100CT3G
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.1 W; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
NTHD3101FT1
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 20 V; Maximum Drain-Source On Resistance: .08 ohm;
NTHD3101FT1G
NTHD3101FT1G by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage and 3.2A max drain current. Ideal for switching applications, it features a built-in diode, 0.08 ohm RDS(on), and operates in enhancement mode. Suitable for surface mount with 8 terminals, it can handle up to 13A pulsed drain current.
NTHD3101FT3
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Peak Reflow Temperature (C): 235; Maximum Pulsed Drain Current (IDM): 13 A;
NTHD3101FT3G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Transistor Element Material: SILICON; Package Body Material: UNSPECIFIED;
NTHD3102CT1
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Maximum Drain Current (ID): 4.4 A; Minimum DS Breakdown Voltage: 20 V;
NTHD4508NT1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.13 W; No. of Elements: 1; Terminal Position: DUAL;
NTHD4P02FT1
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.1 W; Maximum Pulsed Drain Current (IDM): 9 A; Maximum Drain Current (Abs) (ID): 2.1 A;
NTHD4P02FT1G
NTHD4P02FT1G by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage and 2.2A Drain Current. Ideal for SWITCHING applications, it features a 37ns Turn On Time, -55 to 150°C Operating Temperature range, and a compact SMALL OUTLINE package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved