Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FGA25N120ANTDTU by Onsemi is an N-CHANNEL IGBT with 1200V VCE, 25A IC, and 312W power dissipation. Ideal for high-power applications requiring efficient switching at up to 150°C operating temperature.
Median Price
$2.762
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$4.710
100+ parts
$2.380
1k+ parts
$2.110
10k+ parts
-
Arrow
$1.829
$1.792
Verical
$2.278
Nova Conductors
$2.921
Digiode
$4.474
Chip Stock
Vyrian
Flip Electronics
Euro-Tech
Inventory MP
Bristol Electronics
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Modulus Dynamics
$1.278
Semicontronic
$1.550
$1.511
$1.504
Ampacity Inc.
Aztec Data Supply Inc.
$1.780
Corohmni
Continental Prestige Electronics
$2.863
Argo Parts USA
Advanced Electronics
$2.979
Corphita
$4.239
Metaverse IC Inc.
Perfect Parts
RC Electronics
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
SupplyDigital Components
Problanco Electronics
Kepictronics
Authorized Procurement Solutions
Kulean Microsystems
Lixinc
TANS Electronics
Supply Digital
Netroflash
$2.775
$2.717
Alle Elektronik GmbH
Robosynatics
Lucentia Tech
UHIMA Technologies
N-channel IGBTs have higher electron mobility and faster switching speeds compared to P-channel IGBTs, making them suitable for high frequency applications.
High power dissipation capability allows the IGBT to handle large amounts of electrical power without overheating, making it reliable for high-power applications.
With a maximum operating temperature of 150°C, this IGBT can withstand high heat conditions, ensuring stable performance in challenging environments.
The high maximum collector-emitter voltage rating of 1200V allows the IGBT to handle high voltage applications, making it suitable for power electronics and industrial applications.
The maximum gate-emitter voltage of 20V ensures safe and reliable operation of the IGBT, preventing damage from overvoltage conditions.
With a collector current rating of 25A, this IGBT can handle high-current applications, making it suitable for motor control, power supplies, and inverters.
The gate-emitter threshold voltage of 7.5V ensures efficient switching of the IGBT, minimizing power loss and improving overall performance.
Matte tin terminal finish provides good solderability and corrosion resistance, ensuring reliable connections and longevity of the IGBT in various applications.
Insulated Gate Bipolar Transistors (IGBT) FGA25N120ANTDTU attributes and parameters. Explore more Insulated Gate Bipolar Transistors (IGBT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Maximum Gate-Emitter Threshold Voltage:
Maximum Gate-Emitter Voltage:
JESD-609 Code:
Maximum Operating Temperature:
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Sub-Category:
Surface Mount:
Terminal Finish:
FGA25N120ANTDTU Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
261
Deltrol Controls
Other Relays;
Onsemi
Toshiba
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Won-top Electronics
FS150R06KE3BOSA1
FS150R06KE3BOSA1 by Infineon is a N-CHANNEL IGBT with 6 elements, built-in diode, and thermistor. It has a max voltage of 600V, current of 150A, and turn off time of 450ns. Ideal for applications requiring high power efficiency and temperature resistance like industrial motor drives.
APT35GT120JU2
Microsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 260 W; Maximum Collector Current (IC): 55 A; Package Style (Meter): FLANGE MOUNT;
NGTB40N120S3WG
NGTB40N120S3WG by Onsemi is an N-CHANNEL IGBT with 1200V VCE, 160A IC, and 1.95V VCEsat. Ideal for POWER CONTROL applications due to its high power dissipation of 454W and operating temperature range of -55 to 175°C. Package style is FLANGE MOUNT with PLASTIC/EPOXY body material.
FB10R06KL4GB1
Eupec & Kg
N-CHANNEL; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Transistor Element Material: SILICON; Maximum Collector-Emitter Voltage: 600 V;
IKW40N120H3
IKW40N120H3 by Infineon Technologies is an N-CHANNEL IGBT with 1200V VCE, 80A IC, and 483W Ptot. It features a built-in diode for power control applications. With a turn-off time of 414ns and turn-on time of 78ns, it operates at up to 175°C temperature.
IRG4PSH71KDPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 140 W; Maximum Collector Current (IC): 78 A; Maximum Operating Temperature: 150 Cel;
FGH40N60SMDF
FGH40N60SMDF by Onsemi is an N-CHANNEL IGBT with a max Collector-Emitter Voltage of 600V and Max Collector Current of 80A. It has a power dissipation of 349W and is used for power control applications due to its fast rise time (28ns) and fall time (17ns).
HGTG11N120CND
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 11 A; JESD-30 Code: R-PSFM-T3; Terminal Form: THROUGH-HOLE;
FF300R12KT4HOSA1
FF300R12KT4HOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 2 SERIES CONNECTED elements, a max voltage of 1200V, and a max current of 450A. It has a nominal turn-off time of 720ns and turn-on time of 230ns. Ideal for high-power applications requiring fast switching such as industrial motor drives and renewable energy systems.
BSM75GB120DN2
Siemens
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 105 A; Nominal Turn Off Time (toff): 450 ns; Nominal Turn On Time (ton): 30 ns;
2PS13512E43W35222NOSA1
2PS13512E43W35222NOSA1 by Infineon is an N-CHANNEL IGBT with 6 elements, suitable for POWER CONTROL applications. It has a max operating temperature of 55°C and min of -25°C, housed in a RECTANGULAR MICROELECTRONIC ASSEMBLY package. The transistor's SILICON material and ISOLATED case connection enhance its performance.
RGTVX6TS65DGC11
ROHM
ROHM RGTVX6TS65DGC11 is an N-CHANNEL IGBT with 650V max collector-emitter voltage, ideal for power control applications. Featuring a single configuration with built-in diode, it has a 144A max collector current and 298ns nominal turn off time. This IGBT operates b/w -40°C to 175°C temperature range.
DF160R12W2H3FB11BPSA1
Infineon's DF160R12W2H3FB11BPSA1 IGBT features N-CHANNEL polarity, 1200V max collector-emitter voltage, and 375ns nominal turn-off time. Ideal for power control applications with complex configuration, it has 4 elements and operates from -40°C with a 30-terminal flange mount package.
SGS10N60RUFDTU
SGS10N60RUFDTU by Onsemi is an N-CHANNEL IGBT with 600V VCE, 16A IC, and 35W Pd. Ideal for MOTOR CONTROL applications due to its fast tf of 220ns and toff of 284ns. The package style is FLANGE MOUNT with a max operating temp of 150°C.
CM200DY-12NF
Powerex
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 650 W; Maximum Collector Current (IC): 200 A; Qualification: Not Qualified;
IRGP4266DPBF
Infineon's IRGP4266DPBF is an N-CHANNEL IGBT with tr of 90ns and tf of 80ns. It boasts a max power dissipation of 455W, ideal for high-power applications. With Vce(max) at 650V and Ic(max) at 140A, it's suitable for industrial motor drives and renewable energy systems.
APT50GP60J
Advanced Power Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 100 A; Terminal Form: UNSPECIFIED; Nominal Turn Off Time (toff): 202 ns;
HGTG40N60C3
Intersil
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 75 A; Nominal Turn Off Time (toff): 435 ns; Transistor Element Material: SILICON;
IGW50N60TXK
IGW50N60TXK by Infineon Technologies is an N-CHANNEL IGBT transistor with a max collector-emitter voltage of 600V and a max collector current of 100A. It has a nominal turn-off time of 396ns and a turn-on time of 60ns, making it ideal for power control applications. The package style is flange mount with through-hole terminals, suitable for high-power operations at up to 175°C.
APT65GP60JDQ2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 431 W; Maximum Collector Current (IC): 130 A; No. of Elements: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FGA25N120ANTDTU-F109
FGA25N120ANTDTU-F109 by Onsemi is an N-CHANNEL IGBT with 90 ns rise time, 180 ns fall time, and 312 W power dissipation. Ideal for high-power applications requiring a max collector-emitter voltage of 1200 V and a collector current of 50 A. Operating temperature up to 150°C makes it suitable for industrial use.
Fairchild Semiconductor
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 312 W; Maximum Collector Current (IC): 50 A; Maximum Fall Time (tf): 180 ns; Maximum Operating Temperature: 150 Cel;
FGA25N120ANTDTU
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 312 W; Maximum Collector Current (IC): 25 A; Terminal Finish: MATTE TIN; Maximum Gate-Emitter Voltage: 20 V;
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 312 W; Maximum Collector Current (IC): 50 A; Package Style (Meter): FLANGE MOUNT;
FGA25N120ANTDTU_NL
FGA25N120ANTDTU_NL by Fairchild Semiconductor is an N-CHANNEL IGBT with tr of 90 ns, tf of 180 ns, and Abs Pd of 312 W. It operates at a max Vce of 1200 V and can handle a max IC of 25 A. Ideal for high-power applications requiring fast switching speeds and high voltage capabilities.
FGA20S120M
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 40 A; Transistor Element Material: SILICON; Package Style (Meter): FLANGE MOUNT;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 348 W; Maximum Collector Current (IC): 40 A; Terminal Form: THROUGH-HOLE;
FGA20N120FTDTU
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Maximum Collector Current (IC): 40 A; Maximum Gate-Emitter Threshold Voltage: 7.5 V; Maximum Collector-Emitter Voltage: 1200 V;
FGA20S125P_SN00336
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 40 A; Package Style (Meter): FLANGE MOUNT;
FGA20S140P
FGA20S140P by Onsemi is an N-CHANNEL IGBT with a max collector-emitter voltage of 1400V and a max gate-emitter voltage of 25V. It has a nominal turn-off time of 776ns and is designed for power control applications. The transistor has a max power dissipation of 272W, making it suitable for high-power operations in various industries.
FGA25S125P-SN00337
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 50 A; Package Style (Meter): FLANGE MOUNT;
FGA25N120FTD
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 313 W; Maximum Collector Current (IC): 50 A; Maximum Gate-Emitter Threshold Voltage: 7.5 V; Maximum Gate-Emitter Voltage: 25 V;
FGA25N120ANTD_F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 312 W; Maximum Collector Current (IC): 50 A; Package Body Material: PLASTIC/EPOXY;
FGA25N120AN
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 310 W; Maximum Collector Current (IC): 40 A; Qualification: Not Qualified;
FGA25N120ANTD
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 312 W; Maximum Collector Current (IC): 50 A; Nominal Turn On Time (ton): 110 ns;
FGA25N120ANTU
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 310 W; Maximum Collector Current (IC): 25 A; Maximum Operating Temperature: 150 Cel; Maximum Gate-Emitter Voltage: 20 V;
FGA25N120ANDTU
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 310 W; Maximum Collector Current (IC): 25 A; Maximum Fall Time (tf): 90 ns; Maximum Operating Temperature: 150 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved