Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Power Field-Effect Transistors; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 245;
Median Price
$1.710
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Flip Electronics (Authorized)
Nova Conductors
$1.537
DigiKey Marketplace
Vyrian
Flip Electronics
Digiode
Corohmni
$1.506
Argo Parts USA
Continental Prestige Electronics
Netroflash
$1.460
$1.429
Component Stockers USA
$1.680
TANS Electronics
SupplyDigital Components
Kulean Microsystems
Corphita
Problanco Electronics
Kepictronics
UHIMA Technologies
Power Field Effect Transistors (FET) 2SJ661-DL-1E attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
2SJ661-DL-1E Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Wuxi Xuyang Electronic
Panjit International
2N7002-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SI7469ADP-T1-RE3
Vishay Intertechnology
Vishay Intertechnology's SI7469ADP-T1-RE3 is a P-channel FET with 80V DS breakdown voltage and 125A IDM. Ideal for switching applications, it features a built-in diode, 0.027 ohm RDS(on), and operates in enhancement mode. Suitable for surface mount with 5 terminals, this MOSFET has a max power dissipation of 73.5W and can withstand temperatures from -55 to 150°C.
IRF640STRLPBF
Vishay Intertechnology's IRF640STRLPBF is a N-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 72A IDM, 580mJ EAS, and 0.18 ohm RDS(on). With a max power dissipation of 130W and operating temperature up to 175°C, it suits various high-power electronic designs.
IRFL9014TRPBF
Vishay Intertechnology's IRFL9014TRPBF is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 14A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, operates in ENHANCEMENT MODE, and has a max power dissipation of 3.1W.
IRLML0040TRPBF
Infineon's IRLML0040TRPBF is a N-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 15A IDM, 3.6A ID, and 0.056 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it offers high performance in compact designs.
BSP129H6327XTSA1
Infineon's BSP129H6327XTSA1 is a N-CHANNEL FET with 240V DS Breakdown Voltage and 1.4A IDM. Ideal for DEPLETION MODE operation, it features a built-in diode and 20 ohm Drain-Source On Resistance. Widely used in automotive applications due to AEC-Q101 compliance.
IRFH4251DTRPBF
International Rectifier
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 63 W; Case Connection: SOURCE; Maximum Drain Current (Abs) (ID): 188 A;
SQ3427AEEV-T1_GE3
Power Field-Effect Transistors;
IRFP460APBF
Vishay Intertechnology's IRFP460APBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage and 80A IDM. Ideal for SWITCHING applications, it features a max power dissipation of 280W and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C.
IRF9640STRLPBF
Vishay Siliconix
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Shape: RECTANGULAR; Maximum Drain-Source On Resistance: .5 ohm; Operating Mode: ENHANCEMENT MODE;
FDMS86101DC
FDMS86101DC by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 200A IDM, and 0.0075 ohm RDS(on). Ideal for SWITCHING applications, it features a built-in diode, operates in ENHANCEMENT MODE, and has a max power dissipation of 125W.
NTMFS5C670NLT1G
NTMFS5C670NLT1G by Onsemi is a Power FET with N-CHANNEL polarity, 60V DS breakdown voltage, and 440A pulsed drain current. Ideal for applications requiring high power dissipation in small outline packages, such as power supplies and motor control systems.
IRF7493TRPBF-1
FQA36P15
FQA36P15 by Onsemi is a P-CHANNEL Power FET with 150V DS Breakdown Voltage and 144A IDM. Ideal for SWITCHING applications, it features a single configuration with built-in diode and 0.09 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 294W and can handle up to 36A drain current.
FQD11P06TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 38 W; Package Body Material: PLASTIC/EPOXY; Maximum Time At Peak Reflow Temperature (s): 30;
NTD3055-094T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING;
BSP89H6327XTSA1
Infineon's BSP89H6327XTSA1 is a N-CHANNEL Power FET with 240V DS Breakdown Voltage. It features 1.4A IDM, 0.35A ID, and 6ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance and small outline package style.
BSC060N10NS3G
BSC060N10NS3G by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, 360A IDM, and 0.006 ohm RDS(on). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 125W. This PLASTIC/EPOXY transistor has a small outline package style and can withstand temperatures up to 150°C.
IRLML0100TRPBF-1
Infineon's IRLML0100TRPBF-1 is a N-channel Power FET with 100V DS breakdown voltage and 7A IDM. Ideal for enhancement mode operation, it features a built-in diode, 0.22 ohm RDS(on), and is suitable for surface mount applications in power electronics.
AUIRF5210STRL
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Maximum Pulsed Drain Current (IDM): 140 A; Transistor Element Material: SILICON;
IRF9530
Samsung
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Qualification: Not Qualified; Transistor Application: SWITCHING;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2SJ668(TE16L1,NQ
Toshiba
2SJ649-AZ
Renesas Electronics
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Maximum Drain Current (Abs) (ID): 20 A; Maximum Drain Current (ID): 20 A;
2SJ661-DL-1E
Sanyo Semiconductor
2SJ605-AZ
The Renesas Electronics 2SJ605-AZ is a P-CHANNEL FET with 60V DS Breakdown Voltage and 65A ID. Ideal for SWITCHING applications, it features a max power dissipation of 100W, avalanche energy rating of 203mJ, and operates in enhancement mode at up to 150°C.
Nec Electronics
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Drain Current (ID): 65 A; Terminal Position: SINGLE;
2SJ653
The Onsemi 2SJ653 is a P-CHANNEL Power FET with a 60V DS Breakdown Voltage and 148A IDM. Ideal for SWITCHING applications, it features a 0.037 ohm Drain-Source On Resistance in a PLASTIC/EPOXY package with THROUGH-HOLE terminals.
2SJ652-1E
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Maximum Drain Current (ID): 28 A; Maximum Drain Current (Abs) (ID): 28 A;
2SJ651
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Shape: RECTANGULAR; Avalanche Energy Rating (EAS): 175 mJ; Maximum Drain Current (ID): 20 A;
2SJ657
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain Current (ID): 25 A; Minimum DS Breakdown Voltage: 100 V; Operating Mode: ENHANCEMENT MODE;
2SJ661-1E
Power Field-Effect Transistors; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
2SJ650
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Transistor Application: SWITCHING; Maximum Pulsed Drain Current (IDM): 48 A; Package Body Material: PLASTIC/EPOXY;
2SJ654
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Finish: Tin/Copper/Silver/Nickel (Sn/Cu/Ag/Ni); Package Shape: RECTANGULAR;
2SJ656
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Shape: RECTANGULAR; Operating Mode: DEPLETION MODE; Package Body Material: PLASTIC/EPOXY;
2SJ652
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Operating Mode: DEPLETION MODE; No. of Elements: 1; Case Connection: ISOLATED;
2SJ667
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Operating Mode: ENHANCEMENT MODE; Maximum Drain-Source On Resistance: .074 ohm; No. of Terminals: 3;
2SJ665-DL-1E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 65 W; JESD-609 Code: e3; Maximum Drain Current (Abs) (ID): 27 A;
2SJ620
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Package Body Material: PLASTIC/EPOXY; Minimum DS Breakdown Voltage: 100 V;
2SJ610(2-7J1B)
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 2 A; Terminal Form: GULL WING; Qualification: Not Qualified;
2SJ618
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Maximum Drain Current (ID): 10 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved