Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi 2SJ654 is a P-CHANNEL Power FET with 100V DS Breakdown Voltage and 0.45 ohm RDS(on). Ideal for SWITCHING applications, it features a max IDM of 32A. The transistor's package style is FLANGE MOUNT with THROUGH-HOLE terminals.
Median Price
$0.836
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.806
1k+ parts
$0.669
10k+ parts
$0.596
DigiKey
$1.010
Verical
$0.745
Digiode
$0.628
Vyrian
$0.661
DigiKey Marketplace
Corphita
$0.595
Corohmni
Microchip USA
$4.095
Kepictronics
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Authorized Procurement Solutions
Problanco Electronics
UHIMA Technologies
Native Components
Northwest PG Solutions
Continental Prestige Electronics
$0.547
The plastic/epoxy package body material provides durability and protection for the transistor, making it suitable for a variety of applications.
P-channel transistors are known for their lower on-state resistance and higher current-carrying capability, making them efficient for switching applications.
The built-in diode simplifies circuit design and offers protection against reverse polarity, enhancing the functionality of the transistor.
Designed specifically for switching applications, this transistor offers efficient on/off switching performance with low power dissipation.
The high breakdown voltage ensures that the transistor can handle high voltage loads, making it suitable for diverse applications.
With a high pulsed drain current rating, this transistor can handle short-duration peak currents without compromising performance.
Metal-oxide semiconductor technology provides high efficiency and fast switching speeds, making this transistor ideal for power management applications.
Low on-resistance ensures minimal power loss and heat generation, improving the efficiency of the transistor in various operating conditions.
Power Field Effect Transistors (FET) 2SJ654 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
2SJ654 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sensitron Semiconductor
Rectron
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Excel (Suzhou) Semiconductor
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
Microsemi
General Semiconductor
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
IRF3205PBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Case Connection: DRAIN; No. of Elements: 1;
SUD50P04-08-GE3
Vishay Intertechnology
Vishay Intertechnology's SUD50P04-08-GE3 is a P-channel power FET with 40V DS breakdown voltage and 50A max drain current. Ideal for switching applications, it features a built-in diode, operates in enhancement mode, and has a max power dissipation of 73.5W.
NVTFS5116PLTWG
Onsemi
NVTFS5116PLTWG by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, 126A IDM, and 0.072 ohm RDS(ON). It is used in power applications requiring high drain current handling capabilities.
PSMN040-100MSEX
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Avalanche Energy Rating (EAS): 54 mJ; Transistor Application: SWITCHING;
IPB120P04P4L03ATMA2
Infineon Technologies
IPB120P04P4L03ATMA2 by Infineon is a P-CHANNEL FET with 40V DS Breakdown Voltage, 480A IDM, and 0.0049 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance.
IRFP460
Thomson Consumer Electronics
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (Abs) (ID): 20 A;
NDT452AP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Pulsed Drain Current (IDM): 15 A; Package Body Material: PLASTIC/EPOXY;
PSMN4R8-100BSE
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 405 W; Terminal Position: SINGLE; Peak Reflow Temperature (C): 260;
DMP4051LK3-13
DMP4051LK3-13 by Diodes Inc. is a P-CHANNEL FET with 40V DS Breakdown Voltage, 28.9A IDM, and 0.051 ohm RDS(ON). Ideal for SWITCHING applications in small outline packages, operating at up to 150°C with single terminal position and built-in diode.
IRF540NLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 130 W; Maximum Drain Current (ID): 33 A; Maximum Time At Peak Reflow Temperature (s): 30;
AUIRF4905STRL
AUIRF4905STRL by Infineon is a P-CHANNEL FET for SWITCHING applications. It features 55V DS Breakdown Voltage, 280A IDM, and 0.02 ohm RDS(on). With a max power dissipation of 170W and operating temperature up to 150°C, it's ideal for high-power switching circuits in automotive and industrial electronics.
NDS7002A_NB9GGTXA
Fairchild Semiconductor's NDS7002A_NB9GGTXA is a single N-channel power FET for switching applications. It features a 60V DS breakdown voltage, 1.5A max pulsed drain current, and 2 ohm max drain-source resistance. With Gull Wing terminals and small outline package style, it operates in an enhancement mode with a temperature range of -65 to 150°C.
NTD5867NLT4G
NTD5867NLT4G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 76A IDM, and 0.05 ohm RDS(ON). It is an N-CHANNEL MOSFET in a PLASTIC/EPOXY package ideal for power management applications requiring high current handling capabilities.
FQB12P20TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 120 W; Package Shape: RECTANGULAR; JESD-609 Code: e3;
SQJ431EP-T1_GE3
Vishay Intertechnology's SQJ431EP-T1_GE3 is a P-CHANNEL FET with 200V DS Breakdown Voltage, 40A IDM, and 0.221 ohm RDS(ON). Ideal for power applications requiring high drain current and low on-resistance in a small outline package.
NX3008NBKW,115
NX3008NBKW,115 by NXP Semiconductors is an N-CHANNEL FET with a max drain current of 0.35A and power dissipation of 0.31W. It operates in enhancement mode, suitable for applications requiring high temperature resistance up to 150°C such as power management systems.
2N7000
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Operating Temperature: 150 Cel;
PSMN5R5-60YS,115
The NXP Semiconductors PSMN5R5-60YS,115 is a single N-channel power FET with 100A max drain current and 130W max power dissipation. Ideal for applications requiring high-power handling in enhancement mode operation, such as industrial motor control and power supplies.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2SJ668(TE16L1,NQ
Toshiba
Power Field-Effect Transistors;
2SJ649-AZ
Renesas Electronics
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Maximum Drain Current (Abs) (ID): 20 A; Maximum Drain Current (ID): 20 A;
2SJ661-DL-1E
Power Field-Effect Transistors; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 245;
Sanyo Semiconductor
2SJ605-AZ
The Renesas Electronics 2SJ605-AZ is a P-CHANNEL FET with 60V DS Breakdown Voltage and 65A ID. Ideal for SWITCHING applications, it features a max power dissipation of 100W, avalanche energy rating of 203mJ, and operates in enhancement mode at up to 150°C.
Nec Electronics
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Drain Current (ID): 65 A; Terminal Position: SINGLE;
2SJ653
The Onsemi 2SJ653 is a P-CHANNEL Power FET with a 60V DS Breakdown Voltage and 148A IDM. Ideal for SWITCHING applications, it features a 0.037 ohm Drain-Source On Resistance in a PLASTIC/EPOXY package with THROUGH-HOLE terminals.
2SJ652-1E
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Maximum Drain Current (ID): 28 A; Maximum Drain Current (Abs) (ID): 28 A;
2SJ651
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Shape: RECTANGULAR; Avalanche Energy Rating (EAS): 175 mJ; Maximum Drain Current (ID): 20 A;
2SJ657
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain Current (ID): 25 A; Minimum DS Breakdown Voltage: 100 V; Operating Mode: ENHANCEMENT MODE;
2SJ661-1E
Power Field-Effect Transistors; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
2SJ650
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Transistor Application: SWITCHING; Maximum Pulsed Drain Current (IDM): 48 A; Package Body Material: PLASTIC/EPOXY;
2SJ656
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Shape: RECTANGULAR; Operating Mode: DEPLETION MODE; Package Body Material: PLASTIC/EPOXY;
2SJ652
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Operating Mode: DEPLETION MODE; No. of Elements: 1; Case Connection: ISOLATED;
2SJ667
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Operating Mode: ENHANCEMENT MODE; Maximum Drain-Source On Resistance: .074 ohm; No. of Terminals: 3;
2SJ665-DL-1E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 65 W; JESD-609 Code: e3; Maximum Drain Current (Abs) (ID): 27 A;
2SJ620
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Package Body Material: PLASTIC/EPOXY; Minimum DS Breakdown Voltage: 100 V;
2SJ610(2-7J1B)
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 2 A; Terminal Form: GULL WING; Qualification: Not Qualified;
2SJ618
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Maximum Drain Current (ID): 10 A;
Sanyo Electric
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved