Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IRF7342TRPBF by Infineon Technologies is a P-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 27A Max IDM and 114mJ EAS, operating in ENHANCEMENT MODE. With GULL WING terminals and a SMALL OUTLINE package style, it offers 0.105 ohm RDS(on) for efficient performance.
Median Price
$0.439
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.690
100+ parts
$0.713
1k+ parts
$0.512
10k+ parts
Arrow
-
$0.436
Verical
EBV Elektronik
Avnet
$0.274
DigiKey
Rochester
$0.515
$0.427
$0.381
Newark
$0.700
$0.539
$0.517
Future Electronics
$0.430
Farnell
$0.822
$0.534
$0.524
Element14
$0.796
$0.523
$0.494
Chip1Stop
$0.416
Greenchips
$0.375
$0.370
Digiode
$0.474
Nova Conductors
$0.650
Maritex
$0.989
$0.521
$0.400
Bristol Electronics
$1.238
$0.458
$0.396
TME
$1.700
$0.752
$0.555
$0.438
Ozdisan Elektronik
$57.130
NAC Semi
Chip Stock
IBS Electronics
$0.606
Schukat
$0.421
$0.351
$0.338
Cyclops Electronics Ltd
Rutronik
$0.398
Vyrian
Infinite Electronics LLP
4 Star Electronics, Inc.
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Halfin
Prism Electronics
North Shore Components
SIE Connect GmbH - GreenChips
Classic Components Corporation
ComSIT Distribution GmbH
SOS electronic
$0.544
$0.510
Microfarads
Resion
Ampacity Inc.
$0.336
Semicontronic
$0.378
$0.369
$0.367
Advanced Electronics
$0.415
$0.394
Corphita
$0.449
Argo Parts USA
$0.582
$0.565
Component Stockers USA
$1.160
$0.500
$0.390
Modulus Dynamics
$1.184
$1.137
$1.089
Corohmni
$1.232
Continental Prestige Electronics
$1.280
$0.770
Aztec Data Supply Inc.
$1.367
Kepictronics
Perfect Parts
GreenTree Electronics
RC Electronics
$0.630
$0.570
$0.560
iodParts Technologies Inc.
$0.330
Infinite Electronics LLP (Excess)
Robosynatics
$0.748
$0.732
Lucentia Tech
Lixinc
Authorized Procurement Solutions
Futuretech Components
S.R.D Solutions
A-Z Elektronik GmbH
Alle Elektronik GmbH
Netroflash
$0.637
$0.617
$0.604
Glotronic Ltd.
Provides durability and protection for the components inside, making it suitable for a variety of applications.
Allows for efficient switching and control of current flow, making it ideal for power applications.
Offers versatility in circuit design and the built-in diode provides additional functionality for specific applications.
Designed specifically for switching applications, ensuring reliable performance in such scenarios.
Enhancement mode operation allows for easy control of the transistor, making it convenient for various applications.
Utilizes advanced semiconductor technology for efficient power handling and performance.
Power Field Effect Transistors (FET) IRF7342TRPBF attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Infineon Technologies
Additional Features:
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Maximum Turn Off Time (toff):
Maximum Turn On Time (ton):
IRF7342TRPBF Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123NH6327XTSA1
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
CSD18540Q5B
CSD18540Q5B by Texas Instruments is an N-CHANNEL Power FET with 60V DS Breakdown Voltage and 400A IDM. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 0.0033 ohm Drain-Source On Resistance. The transistor features a METAL-OXIDE SEMICONDUCTOR technology and can withstand temperatures from -55 to 175 °C.
IRF7416TRPBF-1
Infineon's IRF7416TRPBF-1 is a P-CHANNEL FET with 10A max drain current and 2.5W power dissipation. Ideal for applications requiring high power efficiency in surface mount configurations, such as power supplies and motor control systems operating up to 150°C.
IRF530PBF
Vishay Intertechnology's IRF530PBF is a N-CHANNEL FET with 100V DS Breakdown Voltage and 56A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 88W and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 175°C.
BSC060N10NS3GATMA1
BSC060N10NS3GATMA1 by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage, 0.006 ohm Drain-Source Resistance, and 360A Pulsed Drain Current. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Suitable for high-power systems requiring efficient power management in compact designs.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
IRFZ44NSTRR
International Rectifier Hirel Products
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Case Connection: DRAIN; Maximum Pulsed Drain Current (IDM): 160 A; Minimum DS Breakdown Voltage: 55 V;
FQB22P10TM
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; No. of Elements: 1; Terminal Finish: MATTE TIN;
IRF7205TRPBF
IRF7205TRPBF by Infineon is a P-CHANNEL FET with 30V DS Breakdown Voltage, 4.6A Drain Current, and 0.07 ohm On Resistance. Ideal for SWITCHING applications in small outline packages, it operates in ENHANCEMENT MODE up to 150°C with GULL WING terminals.
BSC060N10NS3G
BSC060N10NS3G by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, 360A IDM, and 0.006 ohm RDS(on). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 125W. This PLASTIC/EPOXY transistor has a small outline package style and can withstand temperatures up to 150°C.
IRF640NPBF
Infineon's IRF640NPBF is a N-CHANNEL FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features 72A Max Pulsed Drain Current and 247mJ Avalanche Energy Rating. Operating in ENHANCEMENT MODE, it has a max power dissipation of 150W and can withstand temperatures from -55 to 175°C.
FDMS86101
FDMS86101 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 200A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.008 ohm RDS(on), and 135mJ EAS rating. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 104W in a small outline package.
FQP3P50
FQP3P50 by Onsemi is a P-CHANNEL Power FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 10.8A and EAS of 250mJ, making it suitable for high-power operations. With an operating temperature up to 150°C, this MOSFET offers reliable performance in various industrial settings.
LND150N8-G
Microchip Technology
LND150N8-G by Microchip is a N-CHANNEL FET with 0.03A IDM, ideal for SWITCHING applications. Operating in DEPLETION MODE, it has a 1.6W power dissipation and 1000 ohm RDS(on). With a peak temperature of 260C, it's suitable for surface mount designs in various electronic systems.
BSP295H6327XTSA1
BSP295H6327XTSA1 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage and 7.2A max pulsed drain current. It is used in enhancement mode applications, featuring a built-in diode, 0.5 ohm max RDS(on), and AEC-Q101 standard compliance for automotive electronics.
IRF3205PBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Case Connection: DRAIN; No. of Elements: 1;
IRLML0030TRPBF-1
Infineon's IRLML0030TRPBF-1 is a N-channel Power FET with 30V DS breakdown voltage and 21A IDM. Ideal for applications requiring high power dissipation up to 1.3W, such as in small outline packages where space is limited. Operating in enhancement mode, it offers low 0.027 ohm drain-source resistance for efficient performance.
SPP08N80C3XKSA1
SPP08N80C3XKSA1 by Infineon Technologies is a power FET with a min DS breakdown voltage of 800V. It has a max pulsed drain current of 24A and an avalanche energy rating of 340mJ. This N-channel transistor is commonly used in applications requiring high voltage and current handling capabilities.
IRFR4104TRPBF
IRFR4104TRPBF by Infineon Technologies is a N-CHANNEL Power FET with 40V DS Breakdown Voltage and 42A Drain Current. It is used for SWITCHING applications, featuring a built-in DIODE, 480A Pulsed Drain Current, and 145mJ Avalanche Energy Rating. Ideal for surface mount designs in power electronics.
SQ2362ES-T1_GE3
Vishay Intertechnology's SQ2362ES-T1_GE3 is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 17A IDM. Ideal for applications requiring high drain current handling, such as automotive power management systems. Features include EAS of 7mJ, -55 to 175 °C operating temp range, and AEC-Q101 compliance.
IRLML6402PBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Maximum Drain Current (Abs) (ID): 3.7 A; JESD-30 Code: R-PDSO-G3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IRF7240TRPBF
IRF7240TRPBF by Infineon is a P-CHANNEL FET for switching applications. It features a 40V DS breakdown voltage, 10.5A max drain current, and 0.015 ohm max on resistance. With a small outline package style and operating temperature range of -55 to 150 °C, it's ideal for power management in various electronic devices.
IRF7425TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;
IRF7425TRPBF by Infineon Technologies is a P-CHANNEL FET with 20V DS Breakdown Voltage, 15A Drain Current, and 0.0082 ohm On Resistance. Ideal for SWITCHING applications, it features a built-in diode in a RECTANGULAR package with GULL WING terminals. Operating in ENHANCEMENT MODE, it can handle up to 60A Pulsed Drain Current.
IRF7343TRPBF
IRF7343TRPBF by Infineon is a Power FET with N-Channel and P-Channel types. It has 2 separate elements with built-in diode for switching applications. Features include 55V DS breakdown voltage, 38A max pulsed drain current, and 0.05 ohm max drain-source resistance. Ideal for enhancement mode operation in various electronic devices.
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G8;
IRF7341TRPBF
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (Abs) (ID): 4.7 A;
Infineon's IRF7341TRPBF is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 42A IDM, 140mJ EAS, and 0.05 ohm RDS(on). With a max power dissipation of 2W and operating temperature up to 150°C, it suits various high-power electronic designs.
IRF7416TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: MS-012AA; Package Body Material: PLASTIC/EPOXY; Terminal Form: GULL WING;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Style (Meter): SMALL OUTLINE; Qualification: Not Qualified;
IRF7103TRPBF
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Body Material: PLASTIC/EPOXY; Additional Features: LOGIC LEVEL COMPATIBLE;
IRF7103TRPBF by Infineon Technologies is a N-CHANNEL Power FET with 50V DS Breakdown Voltage and 3A Drain Current. It is used for SWITCHING applications in ENHANCEMENT MODE, featuring a 0.13 ohm On Resistance. This small outline transistor has 2 elements with built-in diode, operating up to 150°C.
IRF7410TRPBF
Infineon's IRF7410TRPBF is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 65A IDM, 0.007 ohm RDS(on), and operates in ENHANCEMENT MODE. With GULL WING terminals and SMALL OUTLINE package, it can withstand -55 to 150 °C temperatures.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 30;
IRF7319TRPBF
IRF7319TRPBF by Infineon is a Power FET with N- and P-channel types. It features 2 separate elements with built-in diode, ideal for switching applications. With a max pulsed drain current of 30A and low on-resistance of 0.029 ohm, it operates in enhancement mode for efficient performance.
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Terminal Position: DUAL; Package Shape: RECTANGULAR;
IRF740PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Vishay Intertechnology's IRF740PBF is a N-CHANNEL Power FET with 400V DS Breakdown Voltage and 40A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 520mJ EAS rating, and 0.55 ohm RDS(on).
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Shape: RECTANGULAR; JEDEC-95 Code: TO-220AB; Package Style (Meter): FLANGE MOUNT;
IRF7425TRPBF-1
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN; Package Style (Meter): SMALL OUTLINE;
IRF7425TRPBF-1 by Infineon is a P-channel Power FET with 20V DS breakdown voltage, 15A max drain current, and 0.0082 ohm RDS(on). It's used in power management applications due to its small outline package, 60A pulsed drain current, and -55 to +150°C operating temperature range.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved