Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Vigor
$3.900
Parana Technologies
$7.941
$8.504
DigiPath Technology Company
$8.744
IDEA Electronic Components Group
$8.922
$8.476
$8.030
ChromeModa Solutions
$7.316
AZTECH Wire
$13.516
One Stop Electronics
$179.000
Corphita
Cellphone ICs LMH6521SQE attributes and parameters. Explore more Cellphone ICs devices from National Semiconductor
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LMH6521SQE Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Formosa Microsemi
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sensitron Semiconductor
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Micro Commercial Components
ADF4360-8BCPZRL
Analog Devices
Analog Devices' ADF4360-8BCPZRL is a cellphone IC with 24 terminals, operating at 3.3V. It features BICMOS technology, matte tin finish, and quad terminal position. Ideal for baseband circuits in telecom applications, it has a compact square package with a very thin profile and can withstand industrial temperatures from -40 to 85 °C.
HMC601LP4ETR
Analog Devices' HMC601LP4ETR is a 24-terminal cellphone IC in a square chip carrier package with matte tin finish. Operating temperature range from -40 to 85 °C, suitable for industrial telecom applications. Features RF front end circuit, 3.3V supply voltage, and compact dimensions of 4x4mm for space-constrained designs.
TRF4900
TRF4900 by Texas Instruments is a cellphone IC with 24 terminals in a small outline, thin profile package. It operates b/w -20°C to 60°C and has a supply voltage of 3V. This RF and baseband circuit is ideal for telecom applications due to its compact size and dual terminal position.
AD9082BBPZRL-2D2AC
RF AND BASEBAND CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
CC1100RTKG3
CC1100RTKG3 by Texas Instruments is a cellphone IC with 20 terminals, operating at temperatures from -40 to 85°C. It features a supply voltage of 1.8/3.6V, CMOS technology, and RF/baseband circuitry for telecom applications. This surface-mount chip carrier has a square shape and very thin profile, making it suitable for industrial use in compact devices.
TRF3705IRGET
TRF3705IRGET by Texas Instruments is a 24-terminal cellphone IC with 3.3V supply voltage, operating b/w -40 to 85°C. It features RF and baseband circuitry in a square chip carrier package with nickel palladium gold finish, suitable for industrial telecom applications.
CC2420RGZR
CC2420RGZR by Texas Instruments is a cellphone IC with 48 terminals and operates at temperatures ranging from -40 to 85°C. It features a CMOS technology, RF and baseband circuit for telecom applications, and a nominal voltage of 3.3V. This chip carrier package with a square shape is suitable for industrial use due to its low profile design and surface mount capability.
LT5558EUF#PBF
Analog Devices' LT5558EUF#PBF is a cellphone IC with 16 terminals in a square chip carrier package. It operates b/w -40°C to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
ADF4360-2BCPRL7
ADF4360-2BCPRL7 by Analog Devices is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates at temperatures ranging from -40 to 85°C, with a supply voltage of 3.3V. Ideal for telecom applications requiring baseband circuitry in compact designs.
LMV226TL/NOPB
LMV226TL/NOPB by Texas Instruments is a cellphone IC with surface mount capability. It features a max operating temperature of 85°C, min operating temperature of -40°C, and max supply current of 8mA. Ideal for telecom applications requiring RF and baseband circuit integration in industrial-grade environments.
SA638
SA638 by NXP Semiconductors is a Cellphone IC with 24 terminals, operating at temperatures from -40 to 85°C. It features BICMOS technology, GULL WING terminals, and supports RF and baseband circuits. The package is small outline, thin profile, with shrink pitch and made of plastic/epoxy for surface mount applications.
CC2400-STR1
CC2400-STR1 by Texas Instruments is a cellphone IC with 48 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features include CMOS technology, RF and baseband circuit for telecom applications, and nominal voltage of 1.8V.
CC1021RSST
The Texas Instruments CC1021RSST is a cellphone IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a data rate of 0.1536 Mbps, making it ideal for telecommunications applications.
SI4721-B20-GM
Silicon Labs
SI4721-B20-GM by Silicon Labs is a cellphone IC with 20 terminals in a square package. Operating temp range -20 to 85°C, terminal pitch 0.5mm, and supply voltage 3.3V make it ideal for RF and baseband circuits in telecom applications.
QPF4288TR13-5K
Qorvo
Cellular Telephone Circuits; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
HMC600LP4
Analog Devices' HMC600LP4 is a cellphone IC with 24 terminals in a square chip carrier package. Operating b/w -40 to 85°C, it's ideal for RF and baseband circuits, with a nominal voltage of 3.3V. The compact design (4x4mm) features surface mount capability and industrial temperature grade suitability.
LP3939ILQX
LP3939ILQX by Texas Instruments is a cellphone IC with 16 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features RF and baseband circuits, operates at 3V supply voltage, and has a terminal pitch of 0.5mm.
TRF3762-EIRHARG4
TRF3762-EIRHARG4 by Texas Instruments is a cellphone IC with 40 terminals, operating at -40 to 85°C. It features a supply voltage of 5V, RF and baseband circuit for telecom applications, and terminal pitch of 0.5mm. The package style is chip carrier with heat sink/slug in a square shape, suitable for industrial use.
LMH2121TMX/NOPB
LMH2121TMX/NOPB by Texas Instruments is a cellphone IC with a package style of grid array, very thin profile, and fine pitch. It operates b/w -40 to 85°C and has a max supply current of 4.7mA. This RF and baseband circuit is suitable for telecom applications due to its low power consumption and compact design.
TLV321AC37IN
TLV321AC37IN by Texas Instruments is a CELLPHONE IC with 20 terminals in RECTANGULAR PLASTIC/EPOXY package. It operates b/w -40 to 85 °C, suitable for INDUSTRIAL use. This BASEBAND CIRCUIT has a nominal voltage of 3 V and CMOS technology.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved