Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
$18.027
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Advanced Electronics
$7.607
$6.922
$6.238
Parana Technologies
$11.067
$10.292
IDEA Electronic Components Group
$11.900
$11.305
AZTECH Wire
$13.847
Continental Prestige Electronics
$17.667
DigiPath Technology Company
$18.564
$17.821
One Stop Electronics
$812.000
Semicontronic
$920.000
$897.000
$892.400
Argo Parts USA
Netroflash
$17.126
$16.765
Corphita
Cellphone ICs HMC786LP4ETR attributes and parameters. Explore more Cellphone ICs devices from Hittite Microwave
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
HMC786LP4ETR Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SPC TECHNOLOGY/ MULTICOMP
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TRF370333IRGETG4
Texas Instruments
TRF370333IRGETG4 by Texas Instruments is a cellphone IC with 24 terminals, operating at -40 to 85°C. It features a supply voltage of 5V, RF and baseband circuit for telecom applications, and a compact square package suitable for surface mounting.
LARA-R202-02B-03
U-blox Ag
RF AND BASEBAND CIRCUIT; Moisture Sensitivity Level (MSL): 4;
CC1111F32RSPRG3
The Texas Instruments CC1111F32RSPRG3 is a cellphone IC with 36 terminals in a square chip carrier package. Operating at temperatures from 0 to 85°C, it features RF and baseband circuit technology with a supply voltage of 3V. Ideal for telecom applications, this IC has a terminal pitch of 0.5mm and is surface mountable.
HMC786LP4ETR
Hittite Microwave
TRF96001GQE
TRF96001GQE by Texas Instruments is a cellphone IC with 80 terminals in a square grid array package. It operates b/w -20°C to 70°C, suitable for commercial telecom applications. Featuring RF and baseband circuits, it has a nominal voltage of 3V and very thin profile at 1mm seated height.
ADF4360-9BCPZRL7
Analog Devices
Analog Devices' ADF4360-9BCPZRL7 is a cellphone IC with 24 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 0.5mm. Ideal for baseband circuits, it comes in a square chip carrier package style with matte tin finish and very thin profile.
CC1000-RTR2
CC1000-RTR2 by Texas Instruments is a cellphone IC with 28 terminals, operating at temperatures from -40 to 85°C. It features a supply voltage of 3V, CMOS technology, and RF/baseband circuitry. This rectangular package has a very thin profile, fine pitch grid array style for surface mounting applications.
MAX19997AETX+T
MAX19997AETX+T by Analog Devices is a Cellphone IC with 36 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85 °C, suitable for industrial use. It features BICMOS technology and serves as an RF front end circuit for telecom applications.
TLV320AC56CDWR
TLV320AC56CDWR by Texas Instruments is a Cellphone IC with 20 terminals, CMOS technology, and 3V supply voltage. It is a BASEBAND CIRCUIT for telecom applications, operating b/w 0-70°C in small outline package style.
TRF4903PW
TRF4903PW by Texas Instruments is a cellphone IC with 24 terminals, operating voltage of 2.7V, and max supply current of 0.042mA. It features RF and baseband circuits for telecom applications, in a small outline package suitable for industrial temperature range.
LMV228TLX
LMV228TLX by Texas Instruments is a cellphone IC with a package style of grid array, very thin profile, and fine pitch. It operates in industrial temperature grades from -40 to 85°C and has a nominal voltage of 2.7V. This RF and baseband circuit IC is designed for telecom applications requiring precise performance in compact spaces.
CC2511F8RSPG3
CC2511F8RSPG3 by Texas Instruments is a cellphone IC with 36 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features RF and baseband circuit technology, with a nominal voltage of 3V for telecom applications.
HMC485MS8GE
Analog Devices' HMC485MS8GE is a cellphone IC with 8 terminals in a small outline package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
HMC702LP6CETR
Analog Devices' HMC702LP6CETR is a 40-terminal cellphone IC in a square chip carrier package with matte tin finish. Operating temperature range from -40 to 85 °C, suitable for industrial use. Features BICMOS technology for RF and baseband circuits, with nominal voltage of 3V.
TC5584IUF#TRPBF
Analog Devices' TC5584IUF#TRPBF is a cellphone IC with 24 terminals in a square chip carrier package. It features RF and baseband circuit for telecom applications, operates at 5V supply voltage, and has a terminal pitch of 0.5mm. Ideal for compact mobile devices due to its very thin profile and surface mount capability.
CC1110F16RSPR
The Texas Instruments CC1110F16RSPR is a cellphone IC with 36 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3V. This RF and baseband circuit has a terminal pitch of 0.5mm and is suitable for industrial temperature grade applications.
TRF371125IRGZT
TRF371125IRGZT by Texas Instruments is a cellphone IC with 48 terminals, operating at -40 to 85°C. It features RF and baseband circuits, suitable for telecom applications. The package style is chip carrier with a very thin profile, making it ideal for compact designs.
ADL5360XCPZ-WP
ADL5360XCPZ-WP by Analog Devices is a Cellphone IC with BICMOS tech. It operates b/w -40 to 85 °C, ideal for RF front end circuits. This chip carrier has 36 terminals, measures 6x6 mm, and requires a nominal voltage of 3.3V for telecom applications.
CC1100-RTY1
CC1100-RTY1 by Texas Instruments is a cellphone IC with 20 terminals, operating at -40 to 85°C. It features a supply voltage of 3V, CMOS technology, and RF/baseband circuitry. This surface-mount chip carrier has a square shape, matte tin finish, and very thin profile for industrial applications.
LT5558EUF#PBF
Analog Devices' LT5558EUF#PBF is a cellphone IC with 16 terminals in a square chip carrier package. It operates b/w -40°C to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC786LP4E
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
HMC702LP6CE
HMC702LP6CE by Analog Devices is a cellphone IC with 1 function, operating temperature range of -40 to 85°C, and a package size of 6x6mm. It is used for RF and baseband circuits in the telecom industry.
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
HMC785LP4E
HMC785LP4ETR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved