Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
NLVX1G74MUTCG
Onsemi
NLVX1G74MUTCG by Onsemi is a CMOS latches & flip-flops chip with 7.5ns propagation delay, suitable for industrial applications. It operates at a supply voltage range of 1.65V to 5.5V, has a max frequency of 250MHz, and meets AEC-Q100 screening standards.
1G
S-XQCC-N8
1.6 mm
D FLIP-FLOP
175000000 Hz
24 Amp
1
8
85 Cel
-40 Cel
COMPLEMENTARY
UNSPECIFIED
VQCCN
LCC8,.06SQ,20
SQUARE
CHIP CARRIER, VERY THIN PROFILE
TR
260
3.3
13 ns
Not Qualified
AEC-Q100
.6 mm
FF/Latches
5.5 V
1.65 V
2.3
YES
CMOS
INDUSTRIAL
NICKEL GOLD PALLADIUM
NO LEAD
.5 mm
QUAD
30
POSITIVE EDGE
250 MHz
SNJ54HC259FK
Texas Instruments
SNJ54HC259FK by Texas Instruments is an 8-bit latches & flip-flops chip carrier with a propagation delay of 28 ns at 5V. It operates in a temperature range of -55 to 125°C, suitable for military applications. With a max power supply current of 0.08 mA, it offers low-level trigger type and true output polarity.
1:8 DMUX FOLLOWED BY LATCH
HC
S-CQCC-N20
e0
8.89 mm
50 pF
D LATCH
5.2 Amp
20
125 Cel
-55 Cel
TRUE
CERAMIC, METAL-SEALED COFIRED
QCCN
LCC20,.35SQ
CHIP CARRIER
TUBE
2/6
.08 mA
195 ns
NO
MIL-PRF-38535
2.03 mm
6 V
2 V
5
MILITARY
TIN LEAD
1.27 mm
LOW LEVEL
SNJ54F74FK
SNJ54F74FK by Texas Instruments is a TTL technology chip carrier with 2 functions, 10.5 ns propagation delay, and 50 pF load capacitance. It operates at a supply voltage of 5V and has a max frequency of 80 MHz. Ideal for military applications requiring positive edge trigger latches & flip-flops in ceramic-metal sealed co-fired packaging.
F/FAST
80000000 Hz
20 Amp
2
16 mA
10.5 ns
4.5 V
TTL
80 MHz
SNJ54AC74FK
SNJ54AC74FK by Texas Instruments is a CMOS latches & flip-flops chip carrier with 2 functions, 17.5 ns propagation delay, and 50 pF load capacitance. It operates at a supply voltage of 3.3/5V and has a max frequency of 70 MHz. Ideal for military-grade applications requiring positive edge triggering in harsh environments.
AC
70000000 Hz
NOT SPECIFIED
3.3/5
.02 mA
17.5 ns
3
Tin/Lead (Sn/Pb)
95 MHz
SNJ54F109FK
SNJ54F109FK by Texas Instruments is a TTL technology chip carrier with 2 functions, 10.5 ns propagation delay, and 50 pF load capacitance. It operates at a supply voltage of 5V and has a max frequency of 70 MHz. Ideal for military applications requiring latches & flip-flops with positive edge trigger type.
J-KBAR FLIP-FLOP
17 mA
70 MHz
SNJ54LS273FK
SNJ54LS273FK by Texas Instruments is an 8-bit latches & flip-flops chip carrier with a supply voltage of 5V, operating temperature range of -55 to 125°C, and max frequency of 30MHz. It features a propagation delay of 27ns, positive edge trigger type, and true output polarity. Ideal for military-grade applications requiring high-speed data storage and retrieval.
LS
15 pF
30000000 Hz
8 Amp
27 mA
27 ns
30 MHz
SNJ54AHC74FK
SNJ54AHC74FK by Texas Instruments is a CMOS latches & flip-flops chip with 2 functions, 10.5 ns propagation delay, and 3.3V nominal voltage. It is ideal for military applications due to its MIL-PRF-38535 screening level and operates b/w -55°C to 125°C temperature range. The chip comes in a square ceramic package with metal-sealed cofired body material and has a max frequency of 75 MHz at nominal supply.
AHC/VHC/H/U/V
75000000 Hz
2/5.5
110 MHz
SNJ54HC112FK
SNJ54HC112FK by Texas Instruments is a CMOS latches & flip-flops chip with 2 functions, 41ns propagation delay at 5V. It operates in military-grade temperature range (-55 to 125 °C) and has a max frequency of 17MHz. Ideal for applications requiring fast data storage and retrieval in harsh environments.
J-K FLIP-FLOP
17000000 Hz
-4 Amp
185 ns
NEGATIVE EDGE
20 MHz
SNJ54HC174FK
SNJ54HC174FK by Texas Instruments is a 6-bit latches & flip-flops chip with a propagation delay of 48ns. It operates at a supply voltage range of 2-6V, has a max frequency of 21MHz, and is MILITARY grade. Ideal for applications requiring positive edge triggering in harsh environments.
21000000 Hz
6
240 ns
25 MHz
SNJ54HC175FK
SNJ54HC175FK by Texas Instruments is a CMOS latches & flip-flops chip with 4 bits and 45 ns propagation delay. It operates at a supply voltage of 5V, has a max frequency of 21MHz, and is MIL-PRF-38535 screened for military applications.
4
255 ns
SNJ54HC273FK
SNJ54HC273FK by Texas Instruments is an 8-bit latches & flip-flops chip with a propagation delay of 48ns. It operates at a nominal voltage of 5V and has a max frequency of 18MHz. Ideal for military-grade applications requiring positive edge triggering in a ceramic, metal-sealed package.
DUMMY VAL
HC/UH
18000000 Hz
21 MHz
SNJ54HC74FK
SNJ54HC74FK by Texas Instruments is a CMOS latches & flip-flops chip carrier with 2 functions, operating at a max frequency of 21MHz. It has a positive edge trigger type, 250ns propagation delay, and can handle up to 5.2A current. Ideal for military applications due to MIL-PRF-38535 screening level and wide temperature range from -55°C to 125°C.
.04 mA
250 ns
SNJ54LS379FK
SNJ54LS379FK by Texas Instruments is a TTL latch with 4 bits, 27 ns propagation delay, and 15 pF load capacitance. It operates at a supply voltage of 5V and has a max frequency of 30 MHz. Ideal for military applications due to MIL-PRF-38535 screening level and ceramic package material.
WITH HOLD MODE
15 mA
SNJ54LS377FK
SNJ54LS377FK by Texas Instruments is an 8-bit latch with a propagation delay of 27 ns, operating at a max frequency of 30 MHz. It is designed for military-grade applications, featuring a true output polarity and positive edge trigger type. With a supply voltage range of 4.5V to 5.5V, it is suitable for high-speed digital systems requiring fast data storage and retrieval capabilities.
4 Amp
28 mA
SNJ54ABT377FK
SNJ54ABT377FK by Texas Instruments is an 8-bit latch with a propagation delay of 7.6 ns, suitable for military applications. It operates at a supply voltage of 5V and has a max frequency of 150 MHz, making it ideal for high-speed data processing in harsh environments. The chip carrier package style and ceramic body material ensure durability and reliability in demanding conditions.
ABT
150000000 Hz
48 Amp
30 mA
7.6 ns
BICMOS
150 MHz
SN74AS533FN
SN74AS533FN by Texas Instruments is an 8-bit latches & flip-flops chip with TTL technology. It operates at a nominal voltage of 5V and has 3-STATE output characteristics. This square-shaped chip carrier package is suitable for commercial applications requiring a temperature range of 0 to 70°C.
S-PQCC-J20
70 Cel
0 Cel
3-STATE
PLASTIC/EPOXY
QCCJ
LDCC20,.4SQ
COMMERCIAL
J BEND
SNJ54ACT11074FK
SNJ54ACT11074FK by Texas Instruments is a CMOS latches & flip-flops chip with 2 functions, operating at -55 to 125°C. It has a supply voltage of 5V and comes in a ceramic square chip carrier package. Ideal for military applications requiring positive edge triggering in harsh environments.
S-XQCC-N20
CERAMIC
38535Q/M;38534H;883B
SNJ54ACT11373FK
SNJ54ACT11373FK by Texas Instruments is an 8-bit latch with CMOS technology, operating at temperatures from -55 to 125°C. It has a supply voltage of 5V and features 3-STATE output characteristics. This chip carrier package is suitable for military-grade applications requiring a square-shaped, ceramic body material with surface mount capabilities.
S-XQCC-N28
28
LCC28,.45SQ
SNJ54ACT11374FK
SNJ54ACT11374FK by Texas Instruments is an 8-function latches & flip-flops chip with a supply voltage of 5V. It operates b/w -55°C to 125°C, featuring positive edge trigger and 3-STATE output characteristics. Ideal for military-grade applications requiring reliable performance in harsh environments.
SNJ54HC533FK
SNJ54HC533FK by Texas Instruments is an 8-bit CMOS latch with 3-STATE output, operating b/w -55°C to 125°C. It comes in a ceramic chip carrier package with 20 terminals and is suitable for military-grade applications requiring a power supply of 2V to 6V.
SNJ54ACT74FK
SNJ54ACT74FK by Texas Instruments is a CMOS latches & flip-flops chip carrier with 2 functions, operating at 5V. It has a propagation delay of 14ns, max frequency of 85MHz, and can handle load capacitance of 50pF. Ideal for military applications due to MIL-PRF-38535 screening level.
ACT
85000000 Hz
14 ns
85 MHz
SNJ54LS74AFK
SNJ54LS74AFK by Texas Instruments is a TTL technology chip carrier with 2 functions, 40 ns propagation delay, and 15 pF load capacitance. It operates at a supply voltage of 5V and has a max frequency of 25 MHz. Ideal for military applications requiring positive edge trigger latches & flip-flops in harsh environments.
25000000 Hz
8 mA
40 ns
SNJ54S112FK
SNJ54S112FK by Texas Instruments is a TTL technology chip carrier with 2 functions, 7ns propagation delay, and 15pF load capacitance. It operates at a supply voltage of 5V and has a max frequency of 125MHz. Ideal for military applications requiring negative edge trigger latches & flip-flops in ceramic-metal sealed co-fired packaging.
S
25 mA
7 ns
FF/Latch
125 MHz
SNJ54LS173AFK
SNJ54LS173AFK by Texas Instruments is a 4-bit latches & flip-flops chip with 30ns propagation delay, operating at 5V. It features a ceramic, metal-sealed cofired package and MIL-PRF-38535 screening level. Ideal for military-grade applications requiring positive edge triggering and 3-state output characteristics.
WITH HOLD MODE; WITH DUAL OUTPUT ENABLE; DISABLE TIME CL = 5PF
45 pF
24 mA
35 ns
SNJ54LS174FK
SNJ54LS174FK by Texas Instruments is a 6-bit latches & flip-flops chip with a propagation delay of 30ns. It operates at a supply voltage of 5V and has a max frequency of 30MHz. Ideal for military applications due to MIL-PRF-38535 screening level and ceramic, metal-sealed cofired package material.
26 mA
30 ns
SNJ54LS175FK
SNJ54LS175FK by Texas Instruments is a TTL technology latch with 4 bits, 25 ns propagation delay, and 15 pF load capacitance. It operates at a supply voltage of 5V and has a max frequency of 30 MHz. Ideal for military applications due to MIL-PRF-38535 screening level and ceramic package material.
18 mA
25 ns
SNJ54LS279AFK
SNJ54LS279AFK by Texas Instruments is a TTL technology latches & flip-flops chip with 2 bits, 4 functions, and 20 terminals. It has a propagation delay of 22 ns at nominal voltage of 5V, making it ideal for military applications requiring low-level trigger type and operating temperatures ranging from -55 to 125°C.
WITH DUAL S INPUT FOR TWO FUNCTIONS
R-S LATCH
7 mA
5.25 V
4.75 V
MC10EP131FAR2
MC10EP131FAR2 by Onsemi is a 4-bit ECL flip-flop with 0.6 ns propagation delay. Operating at -40 to 85 °C, it has a max frequency of 3 GHz and supports Vsup from 3V to 5.5V. Ideal for industrial applications requiring fast signal processing in compact spaces.
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
10E
S-PQFP-G32
7 mm
3000000000 Hz
32
LQFP
QFP32,.35SQ,32
FLATPACK, LOW PROFILE
235
-5.2
120 mA
.6 ns
3 V
ECL
GULL WING
.8 mm
MC10EP131FA
MC10EP131FA by Onsemi is a 4-bit ECL flip-flop with 0.6 ns propagation delay. Operating at -40 to 85 °C, it has a max frequency of 3 GHz and Vsup range of 3-5.5V. Ideal for industrial applications requiring fast signal processing in a compact, surface-mountable package.
TRAY
JM38510/37201B2A
JM38510/37201B2A by Texas Instruments is a 6-bit TTL latch with 24ns propagation delay and 40MHz max frequency. Suitable for military applications, it operates b/w -55 to 125°C, has a supply voltage range of 4.5-5.5V, and features positive edge triggering.
ALS
40000000 Hz
19 mA
24 ns
MIL-M-38510 Class B
40 MHz
JM38510/37202B2A
JM38510/37202B2A by Texas Instruments is a 4-bit latches & flip-flops chip carrier with 24ns propagation delay, suitable for military applications. It operates at 5V with a load capacitance of 50pF and max frequency of 40MHz, featuring positive edge trigger type. The package style is ceramic metal-sealed cofired, making it ideal for high-speed TTL technology designs.
14 mA
SNJ54AHC273FK
SNJ54AHC273FK by Texas Instruments is an 8-bit latch with a propagation delay of 12.5 ns, suitable for military-grade applications. It operates at a supply voltage range of 2-5.5V and has a max frequency of 70 MHz, making it ideal for high-speed digital systems requiring fast response times. This chip carrier package features surface mount technology and is designed for use in environments with extreme temperatures ranging from -55 to 125°C.
HQCCN
CHIP CARRIER, HEAT SINK/SLUG
19.5 ns
100 MHz
SNJ54LVC74AFK
SNJ54LVC74AFK by Texas Instruments is a CMOS latches & flip-flops chip carrier with 2 functions, 5.2 ns propagation delay, and 100 MHz max frequency. It operates at -55 to 125 °C, has a load capacitance of 50 pF, and is MILITARY grade suitable for high-speed applications in harsh environments.
LVC/LCX/Z
100000000 Hz
.01 mA
6 ns
3.6 V
2.7
JM38510/65302B2A
JM38510/65302B2A by Texas Instruments is a MILITARY-grade CMOS Latches & Flip-Flops chip with 20 terminals. It operates at temperatures from -55 to 125 °C, with a supply voltage range of 2-6 V. Featuring a propagation delay of 250 ns and load capacitance of 50 pF, it is ideal for applications requiring fast response times and low power consumption.
JM38510/37101B2A
JM38510/37101B2A by Texas Instruments is a TTL latches & flip-flops chip carrier with 20 terminals. It has a propagation delay of 23 ns, operates at temperatures from -55 to 125 °C, and supports a max frequency of 25 MHz. Ideal for military applications requiring fast signal processing in harsh environments.
4 mA
23 ns
JM38510/37102B2A
JM38510/37102B2A by Texas Instruments is a MILITARY-grade TTL chip carrier with 2 functions, 15ns propagation delay, and 50pF load capacitance. Ideal for applications requiring fast response times and low power consumption in harsh environments.
-.4 Amp
21 ns
34 MHz
JM38510/37103B2A
JM38510/37103B2A by Texas Instruments is a MILITARY-grade Latches & Flip-Flops chip with 2 functions, 18 ns Propagation Delay, and TTL Technology. It operates at -55 to 125 °C and has a max freq of 25 MHz. Ideal for applications requiring fast response time in harsh environments.
SNJ54HC109FK
SNJ54HC109FK by Texas Instruments is a CMOS latches & flip-flops chip with 2 functions, 58ns propagation delay at 5V. It operates b/w -55 to 125 °C and has a max frequency of 21MHz. Ideal for military applications requiring fast signal processing in compact spaces.
JM38510/65352B2A
JM38510/65352B2A by Texas Instruments is a CMOS latches & flip-flops chip carrier with 20 terminals. It operates at a supply voltage range of 4.5V to 5.5V, has a propagation delay of 42ns, and can handle a max frequency of 18MHz. Ideal for military-grade applications requiring fast trigger response and low power consumption.
HCT
42 ns
SNJ54LS73AFD
SNJ54LS73AFD by Texas Instruments is a TTL technology chip carrier with 2 latches, operating at -55 to 125 °C. It features a propagation delay of 20 ns, totem pole output, and negative edge trigger. Ideal for military applications requiring high-speed data processing in harsh environments.
TOTEM POLE
20 ns
45 MHz
MC100EP131FAR2
MC100EP131FAR2 by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating at -40 to 85 °C. It has a supply voltage of 3.3V, peak reflow temp of 235C, and max frequency of 3GHz. Ideal for industrial applications requiring fast positive edge triggering in a compact flatpack design.
100E
-4.5
130 mA
MC100EP131FA
MC100EP131FA by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating at -40 to 85 °C. It has a supply voltage of 3.3V and can handle up to 5.5V. Ideal for high-speed applications in industrial settings due to its ECL technology and max frequency of 3GHz.
MC100EP131MNR4G
MC100EP131MNR4G by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating at -40 to 85 °C. It has a max frequency of 3 GHz and uses ECL technology. Ideal for industrial applications requiring fast positive edge triggering in a compact square package.
S-XQCC-N32
e3
5 mm
HVQCCN
LCC32,.2SQ,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
TIN
MC100EP451MNG
MC100EP451MNG by Onsemi is a 6-bit latch with 0.55 ns propagation delay, ideal for industrial applications. Operating at -40 to 85 °C, it supports a frequency of 3 GHz and requires Vsup b/w 3-5.5V. With positive edge trigger type, this ECL technology chip carrier suits high-speed digital systems.
RIGHT
S-PQCC-N32
.55 ns
Shift Registers
MATTE TIN
MC10EP131MNG
MC10EP131MNG by Onsemi is a 4-bit ECL flip-flop with 0.6 ns propagation delay. Operating at -40 to 85 °C, it has a max frequency of 3GHz and Vsup range of 3-5.5V. Ideal for high-speed industrial applications requiring fast data processing in compact spaces.
MC100EP29MNG
MC100EP29MNG by Onsemi is a 20-terminal ECL chip carrier with 2 functions, operating at -40 to 85 °C. It features 0.5 ns propagation delay, positive edge trigger, and complementary output polarity. Ideal for industrial applications requiring fast signal processing in a compact square package.
4 mm
LCC20,.16SQ,20
RAIL
.5 ns
MC100EP29MNTXG
MC100EP29MNTXG by Onsemi is a 20-terminal ECL chip with 2 functions, operating at -40 to 85 °C. It has a propagation delay of 0.5 ns and supports a supply voltage range of 3V to 5.5V. Ideal for industrial applications requiring fast positive edge triggering in compact designs.
SN74AUP2G80RSER
SN74AUP2G80RSER by Texas Instruments is a CMOS latch with 28.7 ns propagation delay, suitable for industrial applications. It operates at 1.2/3.3V with 30pF load capacitance and has a max frequency of 80MHz, making it ideal for high-speed circuit designs. With a compact square package style and surface mount capability, this chip carrier is designed for space-constrained environments.
AUP/ULP/V
e4
1.5 mm
30 pF
1.2/3.3
.0009 mA
28.7 ns
.8 V
1.2
NICKEL PALLADIUM GOLD SILVER
260 MHz
© 2023 All rights reserved
