Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 40 A; JEDEC-95 Code: TO-220AB;
Median Price
$4.360
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.960
1k+ parts
-
10k+ parts
Digiode
$4.142
Vyrian
Anansix
IDEA Electronic Components Group
$0.821
$0.739
MKK Technologies
$1.543
DigiPath Technology Company
Corphita
$3.924
Andel Nordic
$4.157
$3.991
Microchip USA
$28.015
Perfect Parts
Parana Technologies
$0.981
Insulated Gate Bipolar Transistors (IGBT) STGP19NC60W attributes and parameters. Explore more Insulated Gate Bipolar Transistors (IGBT) devices from STMicroelectronics
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Maximum Gate-Emitter Threshold Voltage:
Maximum Gate-Emitter Voltage:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Turn Off Time (toff):
Nominal Turn On Time (ton):
STGP19NC60W Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Asi Semiconductor
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
IKQ75N120CS6XKSA1
IKQ75N120CS6XKSA1 by Infineon is an N-CHANNEL IGBT with VCEsat of 2.15V, IC of 150A, and Pmax of 880W. Ideal for power control applications due to its fast turn-off time (toff) of 428ns and high collector-emitter voltage of 1200V. Package style is flange mount with through-hole terminals.
IGP40N65F5XKSA1
Infineon Technologies' IGP40N65F5XKSA1 is an N-CHANNEL IGBT with 650V VCE, 74A IC, and 255W power dissipation. Ideal for high-power applications requiring efficient switching capabilities in industrial equipment, renewable energy systems, and motor drives.
STGW45HF60WD
STGW45HF60WD by STMicroelectronics is an N-CHANNEL IGBT with 600V max collector-emitter voltage, 70A max collector current, and 250W max power dissipation. Ideal for power control applications due to its single configuration with built-in diode and fast turn-off time of 250ns.
AUIRGDC0250
International Rectifier
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 543 W; Maximum Collector Current (IC): 141 A; Maximum Gate-Emitter Voltage: 20 V; Maximum Operating Temperature: 150 Cel;
IRGR4045DPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Collector Current (IC): 12 A; Package Body Material: PLASTIC/EPOXY; Transistor Application: POWER CONTROL;
FS150R12KT4_B11
FS150R12KT4_B11 by Infineon is an N-CHANNEL IGBT with 6 elements in a bridge configuration. It has a VCEsat of 2.2V, IC of 150A, and Pmax of 750W. Ideal for high-power applications requiring fast switching such as motor drives and power supplies due to its low on/off times and high collector-emitter voltage.
IXXH30N60B3D1
Littelfuse
IXXH30N60B3D1 by Littelfuse is an N-CHANNEL IGBT with 600V VCE, 60A IC, and 1.85V VCEsat. Ideal for POWER CONTROL applications, it features a PLASTIC/EPOXY package, RECTANGULAR shape, and 292ns turn-off time.
FP75R12KE3BOSA1
FP75R12KE3BOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 7 elements and a max collector-emitter voltage of 1200V. It has a nominal turn-off time of 610ns and a max collector current of 105A, making it suitable for high-power applications like industrial motor drives and renewable energy systems.
FGA25N120ANTDTU_NL
FGA25N120ANTDTU_NL by Fairchild Semiconductor is an N-CHANNEL IGBT with tr of 90 ns, tf of 180 ns, and Abs Pd of 312 W. It operates at a max Vce of 1200 V and can handle a max IC of 25 A. Ideal for high-power applications requiring fast switching speeds and high voltage capabilities.
APT35GT120JU2
Advanced Power Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 55 A; Additional Features: LOW CONDUCTION LOSS; Case Connection: ISOLATED;
HGTG40N60B3
Intersil
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; Maximum Collector Current (IC): 70 A; Terminal Position: SINGLE;
FGH40N65UFDTU
FGH40N65UFDTU by Onsemi is an N-CHANNEL IGBT with 650V VCEsat, 80A IC, and 290W power dissipation. Ideal for power control applications, it features a built-in diode, 152ns turn-off time, and operates b/w -55 to 150°C.
APT50GR120JD30
Microchip Technology
Insulated Gate Bipolar Transistors; Maximum Power Dissipation (Abs): 417 W; Maximum Collector Current (IC): 84 A; Maximum Collector-Emitter Voltage: 1200 V; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
IXLF19N250A
IXLF19N250A by Littelfuse is an N-CHANNEL IGBT with 2500V VCE, 19A IC, and 150W Ptot. Ideal for power control applications, it has a turn-off time of 850ns and operates up to 150°C. Recognized by UL, this transistor is in a rectangular package with through-hole terminals.
STGD25N40LZAG
STGD25N40LZAG by STMicroelectronics is an N-CHANNEL IGBT with built-in TVS diode and resistor, ideal for automotive ignition applications. It has a max VCEsat of 1.25V, collector-emitter voltage of 435V, and can handle a max current of 25A. Operating temperature ranges from -55 to 175°C.
HGTG10N120BND
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Maximum Collector Current (IC): 35 A; JESD-609 Code: e3;
STGW40H60DLFB
STGW40H60DLFB by STMicroelectronics is an N-CHANNEL IGBT with 600V max collector-emitter voltage, 80A max collector current, and 283W max power dissipation. It operates up to 175°C making it suitable for high-power applications like motor drives and inverters.
ISL9V3036S3ST
ISL9V3036S3ST by Onsemi is an N-CHANNEL IGBT with a max VCEsat of 1.6V and a max IC of 21A. Ideal for automotive ignition applications, it features a built-in diode and resistor, operates at temperatures ranging from -40 to 175 °C, and has a package style of SMALL OUTLINE.
IGW08T120
IGW08T120 by Infineon Technologies is an N-CHANNEL IGBT transistor with a max collector-emitter voltage of 1200V and a max collector current of 16A. It is designed for power control applications, featuring a nominal turn-off time of 710ns and a max power dissipation of 70W. The package style is flange mount with through-hole terminals, making it suitable for high-power electronic systems.
BSM150GB120DLC
Eupec & Kg
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1200 W; Maximum Collector Current (IC): 300 A; Maximum Operating Temperature: 125 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STGP6NC60HD
STGP6NC60HD by STMicroelectronics is an N-CHANNEL IGBT with 600V max collector-emitter voltage, 15A max collector current, and 56W max power dissipation. Ideal for power control applications due to its single configuration with built-in diode and fast turn-off time of 222ns. Package style is flange mount with through-hole terminals.
STGP30H60DFB
STMicroelectronics' STGP30H60DFB is an N-CHANNEL IGBT with 600V VCE, 60A IC, and 223ns toff. Ideal for power control applications, it features a single configuration with built-in diode in a rectangular package suitable for flange mount installations.
STGP5H60DF
STGP5H60DF by STMicroelectronics is an N-CHANNEL IGBT with VCEsat of 1.95V, IC of 10A, and Ptot of 88W. Ideal for power control applications due to its fast turn-off time (toff) of 280ns and high collector-emitter voltage rating of 600V. The package style is flange mount with through-hole terminals.
STGP10NC60HD
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 60 W; Maximum Collector Current (IC): 9 A; Maximum Gate-Emitter Threshold Voltage: 5.75 V;
STGP15H60DF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 30 A; Maximum VCEsat: 2 V;
STGP35HF60W
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 60 A; Maximum Operating Temperature: 150 Cel; Maximum Collector-Emitter Voltage: 600 V;
STGP20V60DF
N-CHANNEL; Surface Mount: NO; Maximum Collector Current (IC): 40 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Maximum Gate-Emitter Voltage: 20 V; Peak Reflow Temperature (C): NOT SPECIFIED;
STGP15M120F3
STGP15M120F3 by STMicroelectronics is an N-CHANNEL IGBT with a max VCEsat of 2.3V and a max collector-emitter voltage of 1200V. It is used for power control applications, offering a nominal turn off time of 406ns and a max collector current of 30A.
STGP100N30
STMicroelectronics' STGP100N30 is an N-CHANNEL IGBT with 330V VCE, 90A IC, and 250W Ptot. Ideal for general purpose switching applications due to its fast 310ns turn-off time and max operating temp of 150°C. Package style is flange mount with through-hole terminals.
STGP10M65DF2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 20 A; Maximum Gate-Emitter Threshold Voltage: 7 V;
STGP30H60DF
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 60 A; Maximum Operating Temperature: 150 Cel; Peak Reflow Temperature (C): NOT SPECIFIED;
STGP14NC60KD
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 25 A; No. of Elements: 1;
STGP20H60DF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 167 W; Maximum Collector Current (IC): 40 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
STGP30M65DF2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 258 W; Maximum Collector Current (IC): 60 A; Package Shape: RECTANGULAR;
STGP30NC60S
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 175 W; Maximum Collector Current (IC): 55 A; Package Shape: RECTANGULAR;
STGP30V60F
STGP30V60F by STMicroelectronics is an N-CHANNEL IGBT with 600V VCEsat, 260W power dissipation, and 60A collector current. Ideal for POWER CONTROL applications, it has a turn-off time of 225ns and operates b/w -55 to 175°C.
STGP7NC60HD
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 25 A; Maximum Gate-Emitter Threshold Voltage: 5.75 V;
STGP8NC60KD
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 15 A; JEDEC-95 Code: TO-220AB;
STGP7NB60HD
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 14 A; Maximum Collector-Emitter Voltage: 600 V;
STGP10NC60KT4
N-CHANNEL; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Maximum Collector Current (IC): 20 A; Maximum Gate-Emitter Threshold Voltage: 7 V; Maximum Gate-Emitter Voltage: 20 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved