Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi MCH6542 is a Small Signal BJT available in NPN and PNP types. With a max power dissipation of 0.55W, it offers a min hFE of 300 and max IC of 0.3A. Ideal for applications requiring surface mount technology, operating up to 150 °C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
TANS Electronics
Corphita
UHIMA Technologies
Corohmni
Allows for flexibility in circuit design by accommodating both types of transistors.
Enables easy and convenient mounting on circuit boards, saving space and simplifying assembly.
High power dissipation capability ensures the transistor can handle moderate power loads without overheating.
High DC current gain ensures reliable amplification of small signals in various electronic applications.
Can withstand relatively high operating temperatures, making it suitable for a wide range of environments.
Able to handle moderate collector currents, suitable for low to medium power applications.
Small Signal Bipolar Junction Transistors (BJT) MCH6542 attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Minimum DC Current Gain (hFE):
Maximum Operating Temperature:
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Sub-Category:
Surface Mount:
MCH6542 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductor Technology
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Zetex Plc
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Micropac Industries
Renesas Electronics
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
2N3906
Space Power Electronics
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
Semitronics
MMBT2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; JESD-30 Code: R-PDSO-G3;
BC847C
General Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
BC817-40
Kec
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .8 A;
Vishay Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; JESD-30 Code: R-PDSO-G3;
JANTX2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Maximum Turn Off Time (toff): 300 ns; Reference Standard: MIL-19500/255T;
SPC TECHNOLOGY/ MULTICOMP
MMBT2907A
Taitron Components
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Package Style (Meter): SMALL OUTLINE;
BC807-40LT1G
BC807-40LT1G by Onsemi is a PNP BJT transistor for switching applications. Features include VCEsat of 0.7V, hFE of 250, and IC of 0.5A. With a max operating temp of 150°C, it's ideal for small outline packages in high-speed circuits.
Microchip Technology
JANTX2N2222A by Microchip Tech is a NPN BJT transistor with hFE of 30, VCE of 50V, and IC of 0.8A. Ideal for switching applications due to fast ton of 35ns and toff of 300ns. Operates in temp range -65°C to 200°C, complies with MIL-19500/255 standard.
MMBT3904
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Terminal Position: DUAL;
BC847CDW1T1G
BC847CDW1T1G by Onsemi is a NPN BJT with 2 elements, hFE of 420. It operates up to 150°C, VCE of 45V, and IC of 0.1A. Ideal for amplifier applications due to its small outline package and high transition frequency of 100MHz.
JANTX2N2222AUA
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Maximum Collector Current (IC): .8 A; Package Body Material: PLASTIC/EPOXY;
MMBT3906
Comchip Technology
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; Terminal Position: DUAL;
2N6517BU
2N6517BU by Onsemi is a NPN BJT with max. collector-emitter voltage of 350V, max. collector current of 0.5A, and min. DC current gain of 15. It is used in applications requiring small signal amplification due to its high transition frequency of 40MHz and max. power dissipation of 0.625W in a cylindrical package style.
BC547C
Lite-on Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 420;
Micro Electronics
Toshiba
SMBTA06E6327HTSA1
Infineon Technologies
Infineon Technologies' SMBTA06E6327HTSA1 is a NPN BJT transistor with hFE of 100, VCE of 80V, and IC of 0.5A. Ideal for amplifier applications, it operates up to 150°C with a transition frequency of 100MHz. This surface-mount device in a small outline package suits compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCH6202-TL-E
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 500 MHz; Maximum Collector Current (IC): 1.5 A; Transistor Application: SWITCHING;
MCH6121-TL-H
Small Signal Bipolar Transistors; JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN BISMUTH;
MCH6541
NPN AND PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Maximum Collector Current (IC): .7 A; Minimum DC Current Gain (hFE): 300;
MCH6534-TL-E
Small Signal Bipolar Transistors; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1;
MCH6124-TL-E
MCH6542-TL-E
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Maximum Collector Current (IC): .3 A; Minimum DC Current Gain (hFE): 300; Moisture Sensitivity Level (MSL): 1;
MCH6102
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): 1.5 A; No. of Elements: 1;
MCH6203-TL-E
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 420 MHz; Maximum Collector Current (IC): 1 A; No. of Terminals: 6;
MCH6122-TL-E
Small Signal Bipolar Transistors; JESD-609 Code: e6; Terminal Finish: TIN BISMUTH; Moisture Sensitivity Level (MSL): 1;
MCH6536-TL-E
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 330 MHz; Maximum Collector Current (IC): .7 A; Terminal Position: DUAL;
MCH6535
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Maximum Collector Current (IC): 1 A; Maximum Operating Temperature: 150 Cel; Minimum DC Current Gain (hFE): 300;
MCH6123-TL-E
MCH6541-TL-E
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 540 MHz; Maximum Collector Current (IC): .7 A; No. of Terminals: 6;
MCH6103-TL-E
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 420 MHz; Maximum Collector Current (IC): 1 A; Package Style (Meter): SMALL OUTLINE;
MCH6202
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): 1.5 A; Maximum Operating Temperature: 150 Cel;
MCH6101-TL-E
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 430 MHz; Maximum Collector Current (IC): 1.5 A; Terminal Position: DUAL;
MCH6102-TL-E
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 450 MHz; Maximum Collector Current (IC): 1.5 A; Package Style (Meter): SMALL OUTLINE;
MCH6122-TL-H
Small Signal Bipolar Transistors; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1;
MCH6536
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .55 W; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 300; Maximum Operating Temperature: 150 Cel;
Sanyo Electric
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 330 MHz; Maximum Power Dissipation (Abs): .55 W; Maximum Collector Current (IC): .7 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved