Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCH3481-TL-W by Onsemi is a N-CHANNEL FET with 20V DS Breakdown Voltage, 0.8W Power Dissipation, and 2A Drain Current. Ideal for SWITCHING applications in small outline packages, it operates at up to 150 °C with a 0.104 ohm On Resistance.
Median Price
$0.366
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Flip Electronics
1+ parts
-
100+ parts
1k+ parts
10k+ parts
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Bristol Electronics
$0.180
$0.146
Chip Stock
Vyrian
Digiode
Prism Electronics
Microfarads
Avant Electronics Limited
AZTECH Wire
$18.260
Kepictronics
Perfect Parts
Kulean Microsystems
TANS Electronics
Problanco Electronics
SupplyDigital Components
UHIMA Technologies
Corphita
Corohmni
The plastic/epoxy material used for the package body makes the transistor lightweight and durable.
N-channel transistors typically have higher mobility and conductivity, making them efficient for various applications.
The built-in diode simplifies circuit design and saves space by integrating multiple components into one.
Designed specifically for switching applications, this transistor offers fast switching speeds and low power consumption.
With a minimum breakdown voltage of 20V, this transistor is suitable for low to medium voltage applications.
The rectangular shape of the package allows for easy mounting and placement on circuit boards.
Enhancement mode transistors offer high input impedance and low leakage current, making them ideal for many applications.
The high power dissipation capability of 0.8W ensures reliable and stable operation under various load conditions.
The small outline package style saves space on the PCB and is suitable for compact electronic devices.
Metal-oxide semiconductor technology offers high performance, low power consumption, and reliability in electronic circuits.
The high maximum operating temperature of 150° C ensures reliable performance in harsh environments with elevated temperatures.
Silicon transistors provide excellent performance, reliability, and temperature stability for a wide range of applications.
The tin bismuth terminal finish offers good solderability and resistance to corrosion, ensuring reliable connections.
With a maximum drain current of 2A, this transistor can handle high current loads in various applications.
The low on-resistance of 0.104 ohm ensures efficient power transfer and minimal voltage drop across the transistor.
The dual terminal position provides flexibility in circuit layout and allows for easy connectivity with other components.
The maximum time at peak reflow temperature of 30 seconds ensures reliable soldering during assembly.
The peak reflow temperature of 260° C allows for efficient and reliable soldering of the transistor during assembly.
Small Signal Field Effect Transistors (FET) MCH3481-TL-W attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
MCH3481-TL-W Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Dev EOL 7/Apr/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Promax-johnton
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS127H6327XTSA2
Infineon Technologies
Infineon Technologies' BSS127H6327XTSA2 is a small signal N-channel FET with a min DS breakdown voltage of 600V. It operates in enhancement mode and has a max drain current of 0.021A. This transistor is commonly used in applications requiring high voltage switching and amplification.
FDS6675BZ
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Shape: RECTANGULAR; Minimum DS Breakdown Voltage: 30 V;
2N7002W
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Additional Features: ULTRA LOW RESISTANCE; Transistor Application: SWITCHING;
FDN5630
FDN5630 by Onsemi is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V. It is commonly used for switching applications due to its single configuration with built-in diode and max drain current of 1.7A.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
FDN335N
FDN335N by Onsemi is a N-CHANNEL FET with 20V DS Breakdown Voltage, 1.7A Drain Current, and 0.07 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max temp of 150°C. This SMALL OUTLINE transistor has GULL WING terminals and matte tin finish for surface mount assembly.
FDN86265P
FDN86265P by Onsemi is a P-CHANNEL FET with 150V DS Breakdown Voltage, 0.8A Drain Current, and 1.2 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max temperature of 150°C.
2N7002DWQ-7-F
Diodes Incorporated 2N7002DWQ-7-F is a N-channel FET with 60V DS breakdown voltage and 0.23A max drain current. Ideal for switching applications, it features separate elements with built-in diode in a small outline package. Operating in enhancement mode, it has 7.5 ohm max drain-source resistance and peak reflow temp of 260°C.
NDS351AN
NDS351AN by Onsemi is a N-CHANNEL FET with 30V DS breakdown voltage, ideal for switching applications. It features a max ID of 1.4A and 0.16 ohm RDS(on), operating in enhancement mode at up to 150°C. The small outline package with gull wing terminals makes it suitable for surface mount designs.
NDS332P
NDS332P by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, 1A max drain current, and 0.3 ohm max on resistance. Ideal for switching applications, it features a built-in diode in a small outline package suitable for surface mount technology. Operating at up to 150°C, this MOSFET is designed for enhancement mode operation.
2N7000
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Qualification: Not Qualified; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SI2365EDS-T1-GE3
Vishay Intertechnology
SI2365EDS-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET for SWITCHING applications. It features 20V DS Breakdown Voltage, 5.9A Drain Current, and 0.041 ohm On Resistance. With ENHANCEMENT MODE operation and GULL WING terminals, it operates b/w -55 to 150 °C for various electronic designs.
2N7002BK,215
NXP Semiconductors' 2N7002BK,215 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.35A ID. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 1.6 ohm RDS(on) and -55 to 150 °C temp range.
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BSS138NE7854
BSS138NE7854 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.23A ID. It is used in small outline packages for applications requiring low power dissipation, such as MIL-STD-883 compliant circuits.
BSS84AKS,115
NXP Semiconductors' BSS84AKS,115 is a P-CHANNEL FET with 50V DS breakdown voltage and 0.16A max drain current. Ideal for switching applications, it features a built-in diode, GULL WING terminals, and operates in enhancement mode.
FDN338P
FDN338P by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, ideal for switching applications. It features a max drain current of 1.6A and 0.115 ohm on-resistance, operating in enhancement mode at up to 150°C. This small outline transistor with GULL WING terminals is designed for high power dissipation (0.5W) in surface mount configurations.
2N7002DW
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Operating Mode: ENHANCEMENT MODE;
BSS138BKS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .32 A; Package Shape: RECTANGULAR; Additional Features: LOGIC LEVEL COMPATIBLE;
FDC6321C
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): .9 W; Transistor Application: SWITCHING; Terminal Position: DUAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCH3478-TL-W
Small Signal Field-Effect Transistors; Terminal Finish: TIN BISMUTH; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e6;
MCH3375-TL-H
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; JESD-30 Code: R-PDSO-F3; Transistor Application: SWITCHING;
MCH3478-TL-H
Sanyo Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.2 W; Maximum Drain Current (ID): 2 A; Maximum Time At Peak Reflow Temperature (s): 30;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.2 W; Maximum Drain Current (ID): 2 A; No. of Elements: 1;
MCH3333A-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .9 W; Terminal Position: DUAL; Maximum Drain Current (ID): 2 A;
MCH3377-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; JESD-609 Code: e6; Maximum Drain-Source On Resistance: .083 ohm;
MCH3374-TL-W
Small Signal Field-Effect Transistors; Peak Reflow Temperature (C): 260; Terminal Finish: TIN BISMUTH; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1;
MCH3382-TL-W
Small Signal Field-Effect Transistors; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1;
MCH3333
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .9 W; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
MCH3375
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
MCH3383-TL-H
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Terminal Position: DUAL; No. of Elements: 1;
MCH3377-TL-H
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Package Shape: RECTANGULAR; JESD-609 Code: e6;
MCH3374-TL-E
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Maximum Drain Current (Abs) (ID): 3 A; Transistor Application: SWITCHING;
MCH3382-TL-H
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Minimum DS Breakdown Voltage: 12 V; Package Body Material: PLASTIC/EPOXY;
MCH3322
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Minimum DS Breakdown Voltage: 100 V; Terminal Position: DUAL;
MCH3375-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 1.6 A; No. of Terminals: 3; Moisture Sensitivity Level (MSL): 1;
MCH3333A-TL-H
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6;
MCH3376-TL-E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Maximum Drain Current (ID): 1.5 A; Terminal Finish: TIN BISMUTH;
MCH3315
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .9 W; Transistor Application: SWITCHING; JESD-30 Code: R-PDSO-F3;
MCH3312
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; JESD-30 Code: R-PDSO-F3; No. of Terminals: 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved