Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAC4DSMT4G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It operates b/w -40 to 125 °C, making it suitable for AC power control applications. With a surface mount package style and GULL WING terminal form, it offers efficient performance in various electronic devices.
Median Price
$0.425
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
$0.700
100+ parts
$0.434
1k+ parts
$0.281
10k+ parts
-
Mouser Electronics
$2.950
$1.320
$1.030
$0.971
Chip1Stop
$0.293
Rochester
$0.409
$0.340
$0.303
Verical
$0.379
Vyrian
$0.270
Digiode
$0.319
Chip Stock
Ashlea Components Ltd
NexGen Digital
Corohmni
Corphita
$0.302
Component Stockers USA
$0.620
$0.520
Microchip USA
$3.793
Metaverse IC Inc.
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
Problanco Electronics
A-Z Elektronik GmbH
Alle Elektronik GmbH
Kepictronics
Kulean Microsystems
UHIMA Technologies
SupplyDigital Components
Authorized Procurement Solutions
GreenTree Electronics
Provides durability and protection for the internal components, making the product suitable for various applications.
Allows for precise and reliable triggering of the TRIAC, ensuring proper functionality and performance.
Simplified design and easy integration into circuit layouts.
Ensures stable operation even in high-temperature environments.
Can handle high-voltage applications efficiently and safely.
Triode For Alternating Current (TRIAC) MAC4DSMT4G attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Case Connection:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
MAC4DSMT4G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Design/Specification - SMC Packaged Products 30/Nov/2016 Updated Polarity ID 30/Nov/2016
PCN Assembly/Origin - Qualification Assembly Test Site 20/Feb/2014
PCN Packaging - Acquisition of ON Semiconductor Products Invoice Note 17/Nov/2016
PCN Other - Thyristor Products from ON Semiconductor 03/Jul/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2N6349G
2N6349G by Onsemi is a TRIAC with 800V repetitive peak off-state voltage and 8A max RMS on-state current. It operates b/w -40 °C to 125°C, suitable for 4 quadrant logic level TRIAC applications in various industries. The package style is flange mount with through-hole terminals.
BT136S-600E
BT136S-600E by NXP Semiconductors is a single TRIAC with a max RMS on-state current of 4A and repetitive peak off-state voltage of 600V. It is designed for applications requiring a trigger device with a max DC gate trigger current of 10mA, such as in AC power control circuits.
MAC997A6RL1
MAC997A6RL1 by Onsemi is a single TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 0.8A. It operates b/w -40 to 110 °C and has a repetitive peak off-state voltage of 400V. Ideal for applications requiring precise AC switching in various electronic circuits.
BT139B-600G,118
BT139B-600G,118 by NXP Semiconductors is a TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It has a max DC gate trigger current of 50mA and operates b/w -40 to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
MAC212A10G
MAC212A10G by Onsemi is a TRIAC with 800V repetitive peak off-state voltage, 12A max RMS on-state current, and 50mA max DC gate trigger current. It is ideal for applications requiring precise AC power control in various electronic devices.
SC141D
SC141D by Onsemi is a TRIAC with 3 terminals, max. RMS on-state current of 6A, and repetitive peak off-state voltage of 400V. It operates b/w -40 °C to 125°C, ideal for AC power control applications requiring a trigger device type TRIAC in a single configuration with through-hole terminals.
MAC16HCM
MAC16HCM by Onsemi is a TRIAC with 16A RMS on-state current, 600V repetitive peak off-state voltage, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmer switches and motor speed controls.
TIC206C
TIC206C by Texas Instruments is a TRIAC with 4A RMS current, 300V repetitive peak off-state voltage, and 5mA max DC gate trigger current. It operates b/w -40°C to 110°C, making it suitable for AC power control applications requiring precise triggering and low leakage current.
Z0109MUF
STMicroelectronics
STMicroelectronics Z0109MUF is a 4 QUADRANT LOGIC LEVEL TRIAC with 600V repetitive peak off-state voltage and 1A max RMS on-state current. It operates b/w -40°C to 125°C, suitable for AC power control applications. With surface mount capability and low gate trigger voltage of 1.3V, it offers efficient performance in various electronic designs.
Z0103MUF
Z0103MUF by STMicroelectronics is a 4 QUADRANT LOGIC LEVEL TRIAC with a max RMS On-state Current of 1A and Repetitive Peak Off-state Voltage of 600V. It operates b/w -40 to 125 °C and has a Max DC Gate Trigger Voltage of 1.3V. Ideal for applications requiring precise AC power control in various electronic devices.
MAC15M
MAC15M by Onsemi is a TRIAC with 15A RMS on-state current, 600V repetitive peak off-state voltage, and 35mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
2N6073B
2N6073B by Onsemi is a TRIAC with 400V repetitive peak off-state voltage, 4A max RMS on-state current, and 15mA max DC gate trigger current. Ideal for applications requiring isolated case connection, it operates b/w -40 °C to 110°C and suits 4-quadrant logic level TRIAC trigger devices.
DTA10F
DTA10F by Onsemi is a TRIAC with 1.4V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 150°C, suitable for applications requiring up to 10A RMS on-state current and 500V repetitive peak off-state voltage.
BTB08-600CWRG
STMicroelectronics BTB08-600CWRG is a single TRIAC with 8A RMS current and 600V repetitive peak off-state voltage. Ideal for AC applications, it has a max operating temperature of 125°C and snubberless trigger device type.
T850H-6G-TR
T850H-6G-TR by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage, 8A max RMS on-state current, and 50mA max DC gate trigger current. It is used in AC power control applications due to its single configuration, small outline package style, and surface mount capability.
Z0103NN5AA4
Z0103NN5AA4 by STMicroelectronics is a 4-quadrant logic level TRIAC with max. RMS on-state current of 1A and repetitive peak off-state voltage of 800V. It operates b/w -40 to 125°C, suitable for AC power control applications in various industries.
BTA12-600CWRG
BTA12-600CWRG by STMicroelectronics is a single TRIAC with 3 terminals and a max RMS on-state current of 12A. It has a repetitive peak off-state voltage of 600V, making it suitable for applications requiring high power switching in temperatures ranging from -40 to 125°C. This snubberless TRIAC features an isolated case connection and matte tin terminal finish.
MCR08DT1
MCR08DT1 by Onsemi is a TRIAC with max on-state voltage of 1.7V, DC gate trigger current of 0.2mA, and RMS on-state current of 0.8A. Ideal for AC power control applications due to its high operating temp range (-40 to 110 °C) and repetitive peak off-state voltage of 400V.
MAC4DLMT4G
MAC4DLMT4G by Onsemi is a single TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It is ideal for applications requiring 4-quadrant logic level TRIACs, such as AC switching in small outline packages. Operating temperature ranges from -40 to 110°C, making it suitable for various environments.
MAC15SD
MAC15SD by Onsemi is a single TRIAC with 15A RMS on-state current and 400V repetitive peak off-state voltage. It operates b/w -40 to 110 °C, with a max DC gate trigger current of 5mA. Ideal for applications requiring precise AC power control in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAC4DSNT4G
Littelfuse
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC4DCN-1G
TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC4DHMT4G
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC4DCMT4G
MAC4DCN-1
MAC4DCM-001G
MAC4DCNT4
MAC4DCMT4
MAC4DHM-001
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC4DCNT4G
MAC4DCM-1
MAC4DHM
TRIAC; Surface Mount: YES; Maximum Leakage Current: .01 mA; Maximum DC Gate Trigger Voltage: 1.3 V; Maximum Operating Temperature: 110 Cel; Maximum RMS On-state Current: 4 A;
MAC4DCN
TRIAC; Surface Mount: YES; Maximum DC Gate Trigger Voltage: 5 V; Maximum Holding Current: 35 mA; Maximum Leakage Current: .01 mA; Maximum RMS On-state Current: 4 A;
MAC4DCM
TRIAC; Surface Mount: YES; Maximum Leakage Current: .01 mA; Minimum Critical Rate of Rise of Off-state Voltage: 500 V/us; Repetitive Peak Off-state Voltage: 600 V; Maximum DC Gate Trigger Voltage: 5 V;
MAC4DCN-001
MAC4DHM-1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved