Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AS0260CSSC28SUKA0-CR by Onsemi is a CMOS image sensor with 1920x1080 pixels, 1.4um pixel size, and 65dB dynamic range. It operates at -30 to 70°C, with a supply voltage of 1.7-1.95V and output range of 0.40-1.50V. Ideal for digital cameras, surveillance systems, and machine vision applications due to its high resolution and sensitivity.
Median Price
$9.810
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$8.780
10k+ parts
$8.260
Digiode
$15.532
Flip Electronics
Vyrian
Chip Stock
AZTECH Wire
$5.810
$5.580
$5.470
$5.360
Corphita
$14.715
Corohmni
$16.350
Perfect Parts
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Authorized Procurement Solutions
Problanco Electronics
GreenTree Electronics
Northwest PG Solutions
Native Components
UHIMA Technologies
Smaller pixel size allows for higher resolution images to be captured.
Higher maximum supply voltage allows for better performance and flexibility in power management.
High master clock frequency enables fast data processing and high frame rates.
Compact body width makes it suitable for use in space-constrained applications.
CMOS technology offers low power consumption and high image quality.
Wide dynamic range allows for capturing detailed images in both bright and dark environments.
High frame rate enables capturing fast-moving objects with smooth motion.
Image Sensors AS0260CSSC28SUKA0-CR attributes and parameters. Explore more Image Sensors devices from Onsemi
Additional Features:
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Dynamic Range:
Frame Rate:
Horizontal Pixel:
Housing:
JESD-609 Code:
Master Clock:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Output Interface Type:
Output Range:
Output Type:
Package Shape or Style:
Pixel Size (um):
Sensitivity (V/lx.s):
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
Vertical Pixel:
PCN Obsolescence/ EOL - Obsolete Notice 30/Jun/2022
PCN Design/Specification - AS0260 23/Mar/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
General Instrument
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Goodwork Semiconductor
LM107H
Raytheon Semiconductor
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MT9T031P12STC
Aptina
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.13-2.82; Additional Features: ELECTRONIC ROLLING SHUTTER, GLOBAL SHUTTER;
11KAI-04070-CBA-JD-AE
The Onsemi 11KAI-04070-CBA-JD-AE is an image sensor with 2048x2048 pixels, 7.4um pixel size, and 70.5dB dynamic range. It operates b/w -50 to 70 °C, with a max supply voltage of 15.5V. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
NOII4SM6600A-QDC
NOII4SM6600A-QDC by Onsemi features a pixel size of 3.5x3.5 um, operates at a max supply voltage of 2.625 V, and has a master clock of 40 MHz. This image sensor is ideal for applications requiring high-resolution imaging with a dynamic range of 59 dB and an output interface type of 3-WIRE INTERFACE.
NOIX2SN9400B-LTI1
NOIX2SN9400B-LTI1 by Onsemi is an Image Sensor with 3.2X3.2 um pixel size, 32.4 MHz master clock, and 3072 horizontal pixels. It operates b/w -40 to 85 °C and outputs digital voltage via I2C/SPI interface. Ideal for applications requiring high-resolution imaging at a fast frame rate like surveillance systems or industrial cameras.
AR0135CS2M00SUEA0-DPBR1
The Onsemi AR0135CS2M00SUEA0-DPBR1 image sensor features 3.75um pixel size, 50MHz master clock, and 1280x960 resolution. Ideal for applications requiring high-quality digital imaging with a dynamic range of 71.1dB, such as surveillance cameras and industrial machine vision systems.
AR0330SR1C00SUKA0-CP
The Onsemi AR0330SR1C00SUKA0-CP is a 2.2x2.2 um CMOS image sensor with 2304 horizontal pixels and 1536 vertical pixels. It operates b/w -30 to 70 °C, has a dynamic range of 69.5 dB, and outputs digital voltage from 0.40-1.40V. Ideal for applications requiring high-resolution imaging in varying light conditions such as surveillance cameras or industrial machine vision systems.
NOIH2SM1000T-HHC
NOIH2SM1000T-HHC by Onsemi is a CMOS image sensor with 1024x1024 pixels, 18x18 um pixel size, and operates at temperatures from -40 to 85 °C. It has a digital voltage output range of 2.20-2.60V and requires a 3.3V power supply. Ideal for applications requiring high-resolution imaging in a compact square ceramic package for surface mount assembly.
TC276-80
TC276-80 by Texas Instruments is an image sensor with 699x288 resolution. Operating at -10 to 45°C, it requires a 12V power supply. Ideal for THROUGH HOLE MOUNT applications in various industries like surveillance and automotive systems.
AMIS-710205-A4
Image Sensors; Horizontal Pixel: 1728; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel; Power Supplies (V): 5; Vertical Pixel: 1;
MT9P031I12STM-DR1
The Onsemi MT9P031I12STM-DR1 is a CMOS image sensor with 2592x1944 pixels, offering a pixel size of 2.2x2.2 um and a dynamic range of 70.1 dB. It operates at a max supply voltage of 1.9V and is suitable for applications requiring high-resolution imaging at frame rates up to 14 fps.
TCD1208AP
Toshiba TCD1208AP is a 2160-pixel linear CCD image sensor with 14x14 um pixel size. Operating at 4.7-5.3V, it offers an output range of 3-4.50V and sensitivity of 110 V/lx.s. Ideal for applications requiring high-resolution imaging in industrial automation and scientific instrumentation due to its ceramic glass-sealed housing and through-hole mounting feature.
TC255P
TC255P by Texas Instruments is an image sensor with 10x10 um pixel size, 324 horizontal pixels, and 243 vertical pixels. It operates b/w -10 to 55 °C with a supply voltage range of 11-13 V. Ideal for applications requiring high sensitivity and a dynamic range of 66 dB in a square package style.
MT9M413C36STM-DR
The Onsemi MT9M413C36STM-DR is a CMOS image sensor with 12x12 um pixel size, 1280 horizontal pixels, and 1024 vertical pixels. It operates at a max supply voltage of 3.6V and has a master clock of 66 MHz. Ideal for applications requiring high-resolution imaging in environments with temperatures ranging from -5 to 60 °C.
NOIP1FN0500A-QTI
NOIP1FN0500A-QTI by Onsemi is an image sensor with 800x600 resolution, 4.8um pixel size, and 60dB dynamic range. It operates at a max clock of 72MHz and has a frame rate of 545fps. Ideal for applications requiring high-speed digital imaging in industrial or scientific settings.
KAI-16000-AAA-JD-B2
KAI-16000-AAA-JD-B2 by Onsemi is an image sensor with 7.4x7.4 um pixel size, 65 dB dynamic range, and 4872 horizontal pixels. It is used in applications requiring high-resolution imaging such as industrial machine vision systems and scientific cameras.
AR0147ATSC00XUEA0-DRBR
The Onsemi AR0147ATSC00XUEA0-DRBR is an image sensor with 3x3 um pixel size, 50 MHz master clock, and 140 dB dynamic range. Ideal for applications requiring high-resolution imaging in a compact form factor, such as surveillance cameras or industrial machine vision systems.
ASX340AT2C00XPED0-DRBR1
ASX340AT2C00XPED0-DRBR1 by Onsemi is a 5600x5600 pixel CMOS image sensor with a 27 MHz master clock and 1/4 inch optical format. It operates b/w -40 to 85 °C, has a dynamic range of 87 dB, and outputs digital voltage in the range of 0.84-1.96V. Ideal for applications requiring high-resolution imaging at up to 60 fps with a sensitivity of 16.5 V/lx.s.
NOIP1SE5000A-QDI
NOIP1SE5000A-QDI by Onsemi is a 1-inch CMOS image sensor with a pixel size of 4.8X4.8 um. It has a max supply voltage of 1.9V and operates at temperatures ranging from -40 to 85 °C. This sensor is commonly used in applications requiring high-resolution imaging at a frame rate of up to 100 fps.
AR0431CSSC14SMRA0-DR
Onsemi's AR0431CSSC14SMRA0-DR is a 10.16mm x 10.16mm CMOS image sensor with 2312x1746 resolution, offering high-quality imaging for applications like surveillance cameras and automotive vision systems at 120fps frame rate.
MT9V034C12STM
The Onsemi MT9V034C12STM is a 1/3-inch CMOS image sensor with 6x6 um pixel size, offering 752 (H) x 480 (V) resolution and a dynamic range of 110 dB. Operating at temperatures from -30 to 70°C, it has a max supply voltage of 3.6 V and supports a master clock of 27 MHz. Ideal for applications requiring high-quality imaging at up to 60 fps.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AS0260CSSC28SUD20
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Output Range: 0.40-1.50V; Vertical Pixel: 1080; Master Clock: 54 MHz;
AS0260HQSC28SUD20
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Output Range: 0.40-1.50V; Frame Rate: 120 fps; Vertical Pixel: 1080;
AS0260HQSC28SUKA0-CR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.50V; Dynamic Range: 65 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved