Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Image Sensors;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Native Components
$0.630
Northwest PG Solutions
$0.693
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
TANS Electronics
Corphita
UHIMA Technologies
Corohmni
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
Diotec Semiconductor Ag
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
1N4148WS
Continental Device India
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Plessey Semiconductors Discrete Components Div
Other Transistors;
MT9V022177ATMC
Onsemi
The Onsemi MT9V022177ATMC image sensor features 6x6 um pixel size, 26.6 MHz master clock, and 752x480 resolution. Ideal for applications requiring high-quality imaging in a compact form factor, such as surveillance cameras or industrial machine vision systems.
KAI-2020-ABA-CP-AE
KAI-2020-ABA-CP-AE by Onsemi is an image sensor with 7.4x7.4 um pixel size, 1600 horizontal pixels, and 1200 vertical pixels. It operates b/w -50 to 70 °C and has a dynamic range of 68 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
AS0142ATSC00XUSM0-TRBR-E
AS0142ATSC00XUSM0-TRBR-E by Onsemi is a 3x3 um CMOS image sensor with 1280H x 800V pixels, offering a dynamic range of 93 dB. Operating at -40 to 105 °C, it has a digital voltage output interface and supports a frame rate of 60 fps. Ideal for applications requiring high-quality imaging in compact devices.
AR0135CS2M00SUEA0-DRBR1
Onsemi's AR0135CS2M00SUEA0-DRBR1 is a 1/3 inch CMOS image sensor with 1280x960 pixels, offering a dynamic range of 71.1 dB and operating at temperatures from -30 to 70°C. With a max supply voltage of 1.95V and output interface type of 2-WIRE INTERFACE, it is ideal for applications requiring high-resolution imaging at up to 54 fps.
MT9P031I12STC-DR1
The Onsemi MT9P031I12STC-DR1 image sensor features a pixel size of 2.2x2.2 um, 96 MHz master clock, and 70.1 dB dynamic range. Ideal for applications requiring high-resolution imaging with a frame rate of 14 fps in a compact square package measuring 10mm x 10mm x 1.25mm.
KAI-1020-CBA-FD-AE
KAI-1020-CBA-FD-AE by Onsemi is a 7.4x7.4 um CCD image sensor with 1000x1000 resolution, offering a dynamic range of 58 dB and outputting analog voltage at 500mV. Ideal for applications requiring high-quality imaging such as industrial machine vision systems or medical diagnostic equipment.
KAI-01150-QBA-JD-AE
KAI-01150-QBA-JD-AE by Onsemi is an image sensor with 5.5x5.5 um pixel size, 1280x720 resolution, and 64 dB dynamic range. Ideal for applications requiring high-quality imaging in a compact form factor, such as surveillance cameras and industrial machine vision systems.
KAI-29050-QXA-JD-B1
KAI-29050-QXA-JD-B1 by Onsemi is an image sensor with 5.5x5.5 um pixel size, 15.5 V max supply voltage, and 6644 horizontal pixels. Ideal for applications requiring high-resolution imaging in a compact form factor, such as industrial machine vision systems or medical imaging devices.
AR0323ATSB17XUEA0-DPBR-E
Onsemi's AR0323ATSB17XUEA0-DPBR-E is a CMOS image sensor with 3x3 um pixel size, 64 MHz master clock, and 1.26V max supply voltage. Ideal for digital cameras, surveillance systems, and automotive applications due to its high dynamic range of 120 dB and frame rate of 45 fps.
NOIV1SN2000A-QDC
NOIV1SN2000A-QDC by Onsemi features 4.80X4.80 um pixel size, 62 MHz master clock, and 1920 horizontal pixels. This image sensor is ideal for applications requiring high-resolution imaging with a max supply voltage of 2V and operating temperature range of 0-70°C.
NOIP3FN1300A-QTI
NOIP3FN1300A-QTI by Onsemi is an image sensor with 4.80x4.80 um pixel size, 1.7-1.9 V supply voltage range, and 72 MHz master clock speed. Ideal for applications requiring high-speed digital imaging with a resolution of 1280x1024 pixels, such as surveillance cameras and industrial machine vision systems.
NOIV1SE1300A-QDC
NOIV1SE1300A-QDC by Onsemi features 4.80x4.80 um pixel size, 62 MHz master clock, and 1280 horizontal pixels. Ideal for image sensing applications with a dynamic range of 53 dB and frame rate of 150 fps.
KAI-1020-ABB-JP-AE
KAI-1020-ABB-JP-AE by Onsemi is an image sensor with 7.4x7.4 um pixel size, 1000x1000 resolution, and 60 dB dynamic range. It operates at a supply voltage range of 14.5V to 15.5V and has a data rate of 40 Mbps. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
AR0132AT6R00XPEA0-DPBR1
Onsemi's AR0132AT6R00XPEA0-DPBR1 is a 1/3 inch CMOS image sensor with 1280x960 resolution, 3.75um pixel size, and 115dB dynamic range. Ideal for applications requiring high-quality digital imaging at up to 60fps frame rate in a compact surface-mount package.
MT9V135C12STC
Aptina
Image Sensors; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 70 Cel; Horizontal Pixel: 640; Power Supplies (V): 2.8;
KAI-02150-ABA-JP-AE
KAI-02150-ABA-JP-AE by Onsemi is a 2/3 inch CCD image sensor with 1920x1080 pixels, 5.5um pixel size, and 64dB dynamic range. It operates b/w -50 to 70 °C, with supply voltage ranging from 14.5V to 15.5V. Ideal for applications requiring high-resolution imaging in various environments.
ASX340CS2C00SPED0-TRBR
ASX340CS2C00SPED0-TRBR by Onsemi is an image sensor with 5.6x5.6 um pixel size, 27 MHz master clock, and 1/4 inch optical format. It operates b/w -30 to 70 °C and has a dynamic range of 74.8 dB. Ideal for applications requiring high-resolution imaging at a frame rate of 60 fps in a compact square package design.
MT9V024IA7XTM
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Dynamic Range: 100 dB; Vertical Pixel: 480; Minimum Operating Temperature: -40 Cel;
OH01A10-A16A-1A
Omnivision Technologies
IMAGE SENSOR,CMOS;
KAF-4320-AAA-JP-B1
The Onsemi KAF-4320-AAA-JP-B1 is a CCD image sensor with 24x24 um pixel size, offering 2084 (H) x 2085 (V) resolution. It operates b/w -70 °C to 50°C, providing a dynamic range of 87.5 dB and spectral response of 300-1200 nm. Ideal for applications requiring high-resolution imaging in various environmental conditions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2H8652
Kodak Image Sensor Solutions
2H8640
Truesense Imaging
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved