Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.50-2.20V; Body Height: 2.58 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
LIBRA Elektronik GmbH
Corphita
Image Sensors LM9617CCEA attributes and parameters. Explore more Image Sensors devices from National Semiconductor
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Dynamic Range:
Frame Rate:
Horizontal Pixel:
Housing:
JESD-609 Code:
Master Clock:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Output Interface Type:
Output Range:
Output Type:
Package Shape or Style:
Pixel Size (um):
Power Supplies (V):
Sensitivity (V/lx.s):
Sensors or Transducers Type:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
Vertical Pixel:
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Good-ark Electronics
Silicon Standard
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Weitron Technology
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
KAF-09000-ABA-DD-AE
Onsemi
The Onsemi KAF-09000-ABA-DD-AE is a 3056x3056 pixel CCD image sensor with 12x12 um pixel size. It operates b/w -60 to 60 °C and offers a dynamic range of 84 dB. Ideal for high-resolution imaging applications, it features a spectral response of 300-1100 nm and data rate of 10 Mbps.
AR0140AT3C00XUEA0-DRBR
Onsemi's AR0140AT3C00XUEA0-DRBR is a 1/4 inch CMOS image sensor with 1280x800 resolution, 3x3 um pixel size, and 96 dB dynamic range. Ideal for applications requiring high-quality digital imaging at up to 60 fps, such as surveillance cameras and industrial machine vision systems.
AR023ZCSC00SUEA0-DRBR
Onsemi's AR023ZCSC00SUEA0-DRBR is a 3x3 um CMOS image sensor with 1928H x 1088V pixels. It operates at 48 MHz master clock, offers 105 dB dynamic range, and has a frame rate of 60 fps. Ideal for applications requiring high-resolution imaging in a compact form factor.
KAI-16000-AAA-JD-B1
Onsemi's KAI-16000-AAA-JD-B1 is a 7.4x7.4 um pixel size CCD image sensor with 4872H x 3248V resolution and 65 dB dynamic range. It operates at supply voltages b/w 14.5V to 15.5V, making it ideal for high-quality imaging applications requiring precise analog voltage output at a data rate of up to 30 Mbps.
KLI-2113-DAA-ED-AE
KLI-2113-DAA-ED-AE by Onsemi is an image sensor with 14x14 um pixel size, 2098 horizontal and vertical pixels. It operates b/w -25 to 80 °C, with a dynamic range of 76 dB. Ideal for applications requiring high-resolution imaging in industrial automation and surveillance systems.
11KAI-04070-PBA-JD-AE
The Onsemi 11KAI-04070-PBA-JD-AE is an image sensor with 2048x2048 pixels, 7.4um pixel size, and 70.5dB dynamic range. It operates b/w -50 to 70 °C and has a max supply voltage of 15.5V. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
KAI-0330-CBA-CB-BA-DUAL
KAI-0330-CBA-CB-BA-DUAL by Onsemi is an image sensor with 9x9 um pixel size, 648 horizontal pixels, and 484 vertical pixels. It operates at temperatures ranging from -50 to 70 °C and requires a power supply of 15V. Ideal for applications requiring high-resolution imaging in challenging environments.
KAF-0261-AAA-CP-AE
The Onsemi KAF-0261-AAA-CP-AE is a CCD image sensor with 512x512 pixels, 20x20 um pixel size, and 87 dB dynamic range. It operates b/w -70 to 50 °C and has a spectral response of 400-1000 nm. Ideal for applications requiring high-quality imaging in industrial or scientific settings.
KAI-2001-AAA-CP-AE
IMAGE SENSOR,CCD;
KAF-8300-AXC-CP-AA
Truesense Imaging
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Additional Features: SENSITIVITY IS 23 MICRO V/ELECTRON; Maximum Operating Temperature: 70 Cel;
KAI-0330-ABA-CB-AA
The Onsemi KAI-0330-ABA-CB-AA is a 9x9 um CCD image sensor with 648 (H) x 484 (V) pixels. It operates at temperatures from -50 to 70 °C and has a dynamic range of 57 dB. Ideal for applications requiring high-quality imaging in industrial or scientific settings.
MT9V0221A7ATC
The Onsemi MT9V0221A7ATC is a CMOS image sensor with 6x6 um pixel size, 752H x 480V resolution, and 26.6 MHz master clock. It operates at -40 to 85 °C, has a dynamic range of 54.4 dB, and outputs in the range of 0.30-2.60V. Ideal for applications requiring high-quality imaging at a frame rate of up to 60 fps such as surveillance cameras or industrial machine vision systems.
NOIP1FN016KA-GTI
NOIP1FN016KA-GTI by Onsemi is an Image Sensor with 4.5x4.5 um pixel size, 360 MHz master clock, and 4096x4096 resolution. It operates b/w -40 to 85 °C and has a dynamic range of 59 dB. Ideal for high-speed imaging applications requiring precise detail capture at varying light levels.
2H4813
The Onsemi 2H4813 image sensor features 2048x2048 resolution, 7.4um pixel size, and -50 to 70 °C operating temperature range. Ideal for industrial cameras, machine vision systems, and surveillance applications due to its high resolution and wide temperature tolerance.
KAF-1001-AAA-CP-B2
The Onsemi KAF-1001-AAA-CP-B2 is a 24x24 um CCD image sensor with 1024x1024 pixels. It operates b/w -50 to 50 °C, offering a dynamic range of 97 dB. Ideal for full-frame applications, it has a spectral response of 300-1200 nm and data rate of 5 Mbps.
AMIS710401-A4
Image Sensors; Power Supplies (V): 5; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: 0 Cel; Horizontal Pixel: 3456;
AR0138AT3R00XUEA0-DPBR-E
Onsemi AR0138AT3R00XUEA0-DPBR-E is a 1/2.6" CMOS image sensor with 1288x968 resolution, 4.2um pixel size, and 69fps frame rate. Ideal for surface mount applications in cameras, offering a rectangular package style with solder termination and 2-wire interface for seamless integration.
NOIP1SN5000A-QDI
NOIP1SN5000A-QDI by Onsemi is a CMOS image sensor with 2592x2048 pixels, 4.80x4.80 um pixel size, and 72 MHz master clock. It operates at -40 to 85 °C with a dynamic range of 60 dB. Ideal for applications requiring high-resolution imaging at up to 100 fps frame rate.
KAF-8300-AXC-CD-AA
Kodak Image Sensor Solutions
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Additional Features: SENSITIVITY IS 23 MICRO V/ELECTRON; Minimum Operating Temperature: -10 Cel;
AR0141CS2C00SUEA0-DR
The Onsemi AR0141CS2C00SUEA0-DR is a CMOS image sensor with 1280x800 resolution, 3x3 um pixel size, and 50 MHz master clock. It operates b/w -30 to 70 °C and has a dynamic range of 79 dB. Ideal for applications requiring high-resolution imaging at fast frame rates like surveillance cameras or industrial machine vision systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved