Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MPF100TS-FCSG325I by Microchip Technology is a CMOS FPGA with 170 inputs/outputs. It operates b/w -40 to 100°C, with supply voltage range of 0.97V to 1.03V. This low-profile, fine-pitch GRID ARRAY package is ideal for high-performance applications requiring precise signal processing.
Median Price
$197.344
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Newark
1+ parts
$60.280
100+ parts
1k+ parts
-
10k+ parts
Verical
$181.949
Farnell
$212.740
Element14
$470.110
Digiode
$202.103
Vyrian
Chip Stock
Nova Conductors
AZTECH Wire
$4.931
Aztec Data Supply Inc.
$36.910
Corohmni
$63.789
Ampacity Inc.
$180.830
Corphita
$191.466
Vigor
$266.840
Continental Prestige Electronics
$305.930
Semicontronic
$393.570
$383.731
$381.763
LMD Electronica
Montano Global Distributors
NIA Electronics
Ledger Components
Aranea Global
Argo Parts USA
LOOK Integrated Logistics
Provides durability and protects the internal components of the FPGA.
Allows for easy mounting on circuit boards, making installation straightforward.
Operates efficiently within a safe voltage range, ensuring reliable performance.
Utilizes CMOS technology for low power consumption and high speed operation.
Offers a large number of inputs for handling complex logic functions.
Optimizes space utilization on circuit boards and simplifies design layout.
Facilitates easy and reliable connections during installation.
Provides ample terminals for connectivity and integration with other components.
Offers flexibility to program and configure the FPGA for various applications.
Enables high-density packaging and interconnection within a compact design.
Supports a wide voltage range for operation in different environments.
Performs reliably at high temperatures, suitable for demanding applications.
Allows for fine pitch connections, optimizing board space and signal integrity.
Operates effectively in extreme cold conditions, ensuring versatility in use.
Simplifies installation and maintenance of the FPGA within a system.
Offers a low profile design for space-constrained applications.
Compact width for easy integration and placement on circuit boards.
Matches the number of inputs for balanced logic processing and functionality.
Compact length for efficient use of board space and layout flexibility.
Field Programmable Gate Arrays (FPGA) MPF100TS-FCSG325I attributes and parameters. Explore more Field Programmable Gate Arrays (FPGA) devices from Microchip Technology
Programmable IC Type:
No. of Inputs:
No. of Outputs:
Technology:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Minimum Operating Temperature:
Maximum Operating Temperature:
Package Body Material:
Surface Mountable:
Package Style:
Package Code:
Package Shape:
Length:
Width:
Maximum Seated Height:
Package Equivalence Code:
Terminal Position:
Terminal Style:
Terminal Pitch:
No. of Terminals:
JESD-30 Code:
MPF100TS-FCSG325I Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Software 19/Apr/2023
PCN Design/Specification - MPFxxx/RTPF 10/May/2023 Software 19/Apr/2023
PCN Assembly/Origin - Manufacturing Change 23/Feb/2021
PCN Other - Security change 29/May/2019
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Fagor Electronica S Coop
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Semtech
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Fairchild Semiconductor
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Transys Electronics
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
XC7A100T-1FG484I
Xilinx
Xilinx XC7A100T-1FG484I FPGA features 101440 logic cells, 7925 CLBs, and 285 inputs/outputs. Utilized in various applications due to its CMOS technology, with a max operating temperature of 100°C and a min of -40°C. Ideal for high-performance computing tasks requiring fast combinatorial delays.
XC3S200A-4VQG100I
XC3S200A-4VQG100I by Xilinx is a FPGA with 4032 logic cells, 448 CLBs, and 200000 equivalent gates. It operates at max frequency of 667 MHz and has a combinatorial delay of 0.71 ns. Ideal for industrial applications requiring high-speed processing in compact designs.
10CL120YF780I7G
Intel
Intel 10CL120YF780I7G is a FPGA with 7443 CLBs, 1.2V nominal voltage, and 100°C max operating temp. Ideal for industrial applications requiring high-performance programmable ICs in a compact square grid array package with bottom terminals.
XCAU10P-2SBVB484I
FIELD PROGRAMMABLE GATE ARRAY;
M1A3P250-PQG208I
Actel
FIELD PROGRAMMABLE GATE ARRAY; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
EP3C10M164C8N
EP3C10M164C8N by Intel is a FPGA with 10320 logic cells, 106 inputs/outputs, and max clock frequency of 472.5 MHz. It operates at temperatures b/w 0-85°C and has a package style of grid array for applications requiring high-speed data processing in compact spaces.
10M08SCM153I7G
Intel's 10M08SCM153I7G FPGA features 8000 logic cells, 500 CLBs, and 250 inputs/outputs. With a max supply voltage of 3.15V, it is ideal for industrial applications requiring high-performance programmable ICs in a compact square package with grid array style and 0.5mm terminal pitch.
A3P600-FGG256I
Microchip Technology
Microchip Technology's A3P600-FGG256I is a CMOS FPGA with 13824 CLBs and 600000 gates. Operating at 1.5V, it offers a max clock frequency of 350MHz. Ideal for industrial applications requiring high gate count and clock speed in a compact grid array package.
LFE5U-45F-7BG256I
Lattice Semiconductor
FIELD PROGRAMMABLE GATE ARRAY; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Finishing Of Terminal Used: TIN SILVER COPPER; JESD-609 Code: e1; Moisture Sensitivity Level (MSL): 3;
LCMXO2-1200HC-4TG144I
LCMXO2-1200HC-4TG144I by Lattice Semiconductor is a 1280 logic cell FPGA with max clock freq of 133MHz. It operates b/w -40 to 100°C, has 107 inputs/outputs, and uses matte tin terminals. Ideal for applications requiring high-speed processing in compact designs.
A3P250-PQG208
Microchip Technology's A3P250-PQG208 is a CMOS FPGA with 6144 CLBs and 250000 gates. Operating at 350 MHz, it has a supply voltage range of 1.425V to 1.575V. Ideal for applications requiring high-speed processing in commercial environments, this FPGA comes in a square plastic/epoxy package with gull wing terminals.
LCMXO2-1200HC-4SG32C
LCMXO2-1200HC-4SG32C by Lattice Semiconductor is a 1280 Logic Cells FPGA with 160 CLBs, 21 Inputs/Outputs. Operating at 2.375V to 3.6V, it's ideal for applications requiring high-density programmable logic in compact form factors and temperature-sensitive environments.
XC7S6-1FTGB196C
The Xilinx XC7S6-1FTGB196C is a FPGA with 6000 logic cells, 469 CLBs, and max clock frequency of 1098 MHz. It is used in applications requiring high-speed processing and programmable ICs for various electronic systems.
EP4CE6F17I8LN
EP4CE6F17I8LN by Intel is a FPGA with 6272 logic cells, 392 CLBs, and max clock frequency of 362 MHz. It is used in applications requiring high-speed processing and programmable ICs for various electronic systems. With a package style of grid array and low profile, it offers versatility in design and integration.
EP2C5T144C8N
EP2C5T144C8N by Intel is a FPGA with 4608 logic cells, 288 CLBs, and 89 inputs. It operates at a max supply voltage of 1.25V and uses CMOS technology. Ideal for applications requiring high-speed data processing in compact designs.
EP2C20F484I8N
Altera
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE; JESD-609 Code: e1;
5CEBA4F17I7N
The Altera 5CEBA4F17I7N is a Field Programmable Gate Array (FPGA) with a maximum supply voltage of 1.13V. It has a square package shape with 256 terminals and a low profile grid array style. Its surface mount capability makes it easy to integrate into various applications.
LCMXO256C-3TN100C
LCMXO256C-3TN100C by Lattice Semiconductor is a 256 Logic Cells FPGA with 32 CLBs and 78 Inputs/Outputs. Operating at 1.8V, it has a max supply voltage of 3.465V and can withstand temperatures up to 85°C. Ideal for applications requiring high-performance programmable ICs in compact form factors.
XC7S75-1FGGA676I
Xilinx XC7S75-1FGGA676I FPGA features 76800 logic cells, 6000 CLBs, and a max clock frequency of 1098 MHz. Ideal for industrial applications requiring high-speed processing and programmable ICs in a compact square package with 400 inputs/outputs.
10M02DCV36I7G
The Altera 10M02DCV36I7G is a field-programmable gate array (FPGA) with 2000 logic cells. It uses CMOS technology and has 27 inputs and outputs. The package is a square BGA with 36 terminals and a pitch of 0.4mm. It operates at a nominal supply voltage of 1.2V. Suitable for various applications requiring FPGA functionality.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MPF100T-1FCSG325I
MPF100T-1FCSG325I by Microchip: FPGA with 170 inputs/outputs, CMOS tech, 0.97V to 1.03V supply range. Ideal for high-performance computing applications due to low profile grid array package and fine pitch terminals.
MPF100T-FCSG325I
MPF100T-FCSG325I by Microchip Tech is a CMOS FPGA with 170 inputs/outputs. It operates b/w -40 to 100°C, with supply voltage range of 0.97-1.03V. This low-profile, fine-pitch GRID ARRAY package is ideal for high-performance applications in electronics.
MPF100T-1FCG484E
MPF100T-1FCG484E by Microchip is a CMOS FPGA with 244 inputs/outputs, 484 terminals, and max supply voltage of 1.03V. Ideal for applications requiring high-density programmable logic in compact spaces due to its small form factor and grid array package style.
MPF100T-1FCVG484I
MPF100T-1FCVG484I by Microchip Technology is a CMOS FPGA with 109K logic cells, 284 inputs/outputs. Operating at -40 to 100°C, it's ideal for industrial applications requiring high-density programmable logic solutions in a compact 19x19mm grid array package.
MPF100T-FCG484E
MPF100T-FCG484E by Microchip: FPGA with 244 inputs/outputs, CMOS tech, 1.03V max supply voltage. Ideal for high-performance applications requiring programmable gate arrays in a compact 23x23mm grid array package.
MPF100T-FCVG484I
MPF100T-FCVG484I by Microchip is a CMOS FPGA with 284 inputs/outputs, operating temp range of -40 to 100°C. It features a grid array package with 0.8mm terminal pitch, suitable for industrial applications requiring high-density programmable logic solutions.
MPF100T-1FCG484I
Microchip Technology's MPF100T-1FCG484I is a CMOS FPGA with 244 inputs/outputs, operating b/w -40 to 100°C. Its grid array package has 484 terminals on a 23x23mm square body, suitable for applications requiring programmable gate arrays in surface-mount technology.
MPF100TS-1FCVG484I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: FBGA; Package Shape: SQUARE; No. of Outputs: 284;
MPF100T-FCSG325E
FIELD PROGRAMMABLE GATE ARRAY; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 325; Package Code: LFBGA; Package Shape: SQUARE;
MPF100T-FCG484I
Microchip Technology's MPF100T-FCG484I is a CMOS FPGA with 244 inputs/outputs, operating b/w -40 to 100°C. This grid array package has 484 terminals on a square body, suitable for applications requiring programmable gate arrays in surface-mount technology.
MPF100T-FCVG484E
MPF100TS-FCG484I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;
MPF100T-1FCG484T2
FIELD PROGRAMMABLE GATE ARRAY; Grading Of Temperature: AUTOMOTIVE; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE;
MPF100T-1FCVG484E
MPF100T-1FCVG484E by Microchip is a CMOS FPGA with 284 inputs/outputs, operating b/w 0-100°C. It features a grid array package style with 0.8mm terminal pitch, suitable for applications requiring high-density programmable logic solutions.
MPF100TL-FCSG325I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 325; Package Code: LFBGA; Package Shape: SQUARE; Package Equivalence Code: BGA325,21X21,20;
MPF100TL-FCVG484E
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: FBGA; Package Shape: SQUARE; JESD-30 Code: S-PBGA-B484;
MPF100TLS-FCVG484I
MPF100TLS-FCVG484I by Microchip: FPGA with 284 inputs/outputs, CMOS tech, 0.97V to 1.03V supply voltage range. Ideal for high-performance computing applications due to fine-pitch grid array package style and operating temp of -40°C to 100°C.
MPF100TL-FCVG484I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: FBGA; Package Shape: SQUARE; Surface Mount: YES;
MPF100TL-FCG484I
MPF100TL-FCG484I by Microchip: FPGA with 244 inputs/outputs, CMOS tech, 1.03V max supply. Ideal for high-performance applications requiring programmable gate arrays in a compact 23x23mm grid array package.
MPF100TS-1FCSG325I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 325; Package Code: LFBGA; Package Shape: SQUARE; Maximum Supply Voltage: 1.03 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved