Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SN74ACT72235-30FNR by Texas Instruments is a FIFO chip with 1KX9 organization, 30.3 ns cycle time, and 5V nominal voltage. It is used in applications requiring synchronous operation, such as data buffering and communication systems. The chip comes in a square plastic/epoxy package with 44 terminals for surface mount installation.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$2.744
$3.227
DigiPath Technology Company
$3.021
$2.780
ChromeModa Solutions
$3.083
$2.528
IDEA Electronic Components Group
$2.775
AZTECH Wire
$15.011
One Stop Electronics
$20.000
Corphita
Provides durability and protection for the internal components, ensuring long-term reliability.
Ensures fast and efficient data retrieval and processing, making it suitable for high-speed applications.
Allows for synchronized data transfers and operations, improving overall system performance.
Standard voltage supply ensures compatibility with a wide range of systems and devices.
Provides ample connectivity options for interfacing with other components or systems.
Organized in a 1Kx9 configuration, offering a balanced ratio of storage capacity and data width.
Utilizes CMOS technology for low power consumption and high noise immunity, making it energy-efficient and reliable.
Offers a large number of words for storing data, suitable for applications requiring extensive memory capacity.
Ability to enable/disable output provides flexibility in controlling data flow and access to memory.
FIFO SN74ACT72235-30FNR attributes and parameters. Explore more FIFO devices from Texas Instruments
Maximum Access Time:
Additional Features:
Cycle Time:
JESD-30 Code:
Length:
Memory Density:
Memory Width:
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Enable:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SN74ACT72235-30FNR Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.71
SB
8542.32.00.70
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Sangdest Microelectronics (Nanjing)
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Diode
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358AN
Weitron Technology
SN74ACT7206L15RJ
Texas Instruments
SN74ACT7206L15RJ by Texas Instruments is a 16Kx9 FIFO chip with 25ns cycle time, operating at 5V. It features a max clock frequency of 40MHz and memory density of 147456 bits. Ideal for applications requiring fast data transfer and storage in commercial temperature environments.
SN74ABT7819-15PNR
SN74ABT7819-15PNR by Texas Instruments is a FIFO with 512x18 organization, operating at 5V. It features a cycle time of 14.92ns, synchronous mode, and 3-STATE output characteristics. This device is suitable for applications requiring fast data storage and retrieval in commercial temperature environments.
SN74ACT2235-40PAG
SN74ACT2235-40PAG by Texas Instruments is a FIFO memory with 1Kx9 organization, operating at 25MHz clock frequency and 40ns cycle time. It features a parallel interface, 3-STATE output characteristics, and GULL WING terminal form. Ideal for applications requiring fast data storage and retrieval in commercial temperature environments.
72V241L15PFGI8
Integrated Device Technology
FIFOs; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE; Maximum Seated Height: 1.6 mm;
IDT72801L25PFI8
IDT72801L25PFI8 by Integrated Device Technology is a FIFO with 256x9 organization, operating at 40 MHz clock frequency. It has a cycle time of 25 ns and can be used in industrial applications requiring fast data storage and retrieval. With synchronous operation and parallel interface, it offers high-speed performance for various electronic systems.
IDT72V7280L10BB
IDT72V7280L10BB by Integrated Device Technology is a 16Kx72 FIFO with a cycle time of 10ns and operating at 100MHz. Suitable for commercial applications, it features synchronous operation, 256 terminals in a grid array package, and a memory density of 1179648 bits.
IDT72V265LA10PFG8
IDT72V265LA10PFG8 by Renesas Electronics is a 16Kx18 FIFO with synchronous operation and 10 ns cycle time. It features a memory density of 294912 bit, operates at a supply voltage range of 3-3.6 V, and has an output enable function. This device is commonly used in applications requiring fast data buffering and retrieval in commercial temperature environments.
IDT72801L15TFI8
IDT72801L15TFI8 by Integrated Device Technology is a FIFO with 256x9 organization, operating at 15ns cycle time and 66.7MHz clock frequency. Ideal for industrial applications, it features synchronous operation, parallel interface, and a low profile flatpack package with 64 terminals.
72V271LA10PFG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Memory Density: 294912 bit;
74HC40105DB,112
NXP Semiconductors
NXP Semiconductors' 74HC40105DB,112 is a FIFO IC with 16x4 organization, operating at 33MHz clock frequency. It features a cycle time of 71.428ns and can handle a max access time of 600ns. Ideal for automotive applications due to its temperature grade and memory width of 4 bits.
SN74ACT7200L-50DVR
SN74ACT7200L-50DVR by Texas Instruments is a FIFO with 256x9 organization, 65 ns cycle time, and 3-STATE output characteristics. It operates asynchronously at a nominal voltage of 5V. This device is commonly used in applications requiring fast data storage and retrieval with parallel access.
1O7820-20PNG4
1O7820-20PNG4 by Texas Instruments is a 512x18 FIFO with 20ns cycle time and 5V nominal voltage. Ideal for applications requiring fast synchronous data transfer, such as networking equipment and telecommunications devices. Features include low profile flatpack package, parallel operation, and output enable functionality.
IDT72V271LA10PFG8
FIFOs; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Length: 14 mm;
SN74ACT72231L-15RJR
SN74ACT72231L-15RJR by Texas Instruments is a 2Kx9 FIFO chip with 15ns cycle time, operating at 5V. It features synchronous operation, 3-STATE output characteristics, and parallel interface. This FIFO is ideal for applications requiring fast data transfer and temporary storage in commercial-grade environments.
IDT72V05L25JGI
The Renesas Electronics IDT72V05L25JGI is a FIFO chip with 8Kx9 organization, operating at 28.5 MHz clock frequency and 35 ns cycle time. It is designed for industrial applications requiring fast asynchronous data storage and retrieval in a compact chip carrier package.
CY7C4235-15AC
Cypress Semiconductor
CY7C4235-15AC by Cypress Semiconductor is a 2Kx18 FIFO with 15ns cycle time, operating at 66.7MHz clock frequency. It is used in applications requiring fast synchronous data transfer and features a 64-terminal flatpack package suitable for surface mount assembly.
CD74HC40105MT
CD74HC40105MT by Texas Instruments is a FIFO memory IC with 16x4 organization, 64-bit memory density, and 10 MHz clock frequency. It operates in synchronous mode with a cycle time of 500 ns and is suitable for military-grade applications requiring fast data storage and retrieval.
72V3660L7-5PFGI8
Renesas Electronics' 72V3660L7-5PFGI8 FIFO operates synchronously with a cycle time of 7.5 ns and clock frequency up to 133.3 MHz. Ideal for industrial applications, it features a memory width of 36 bits, 4096-word organization, and low profile flatpack packaging.
7200L15SOI8
7200L15SOI8 by Integrated Device Technology is a FIFO with 256x9 organization, operating at 40 MHz clock frequency. It has a cycle time of 25 ns and can handle a max supply voltage of 5.5 V. Ideal for industrial applications requiring fast data processing and reliable memory storage in compact systems.
SN74ACT72231L-25RJR
SN74ACT72231L-25RJR by Texas Instruments is a 2Kx9 FIFO chip with 25ns cycle time, operating at 5V. It features synchronous operation, 40MHz clock frequency, and 3-STATE output characteristics. Ideal for applications requiring fast data storage and retrieval in commercial temperature environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
SN74V293-6PZA
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 80; Package Code: LQFP; Package Shape: SQUARE; No. of Functions: 1;
SN74V245-15PAG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE; Organization: 4KX18;
SN74V293-7PZA
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 80; Package Code: LQFP; Package Shape: SQUARE; JESD-30 Code: S-PQFP-G80;
SN74V245-10PAG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE; Package Style (Meter): FLATPACK, THIN PROFILE, FINE PITCH;
SN74V235-7PAG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE; Parallel or Serial: PARALLEL;
SN74V245-7PAG
SN74V245-7PAG by Texas Instruments is a FIFO with 4Kx18 organization, operating at 166MHz. It features a cycle time of 7.5ns, synchronous mode, and 3-state output characteristics. This memory IC type is suitable for applications requiring fast data transfer and parallel operation in commercial temperature environments.
SN74V215-7PAG
SN74V215-7PAG by Texas Instruments is a FIFO with 512x18 organization, operating at 133 MHz clock frequency. It features a cycle time of 7.5 ns and operates at a nominal voltage of 3.3 V. This device is ideal for applications requiring fast data storage and retrieval in synchronous mode with 3-STATE output characteristics.
SN74ACT7201LA-25NP
SN74ACT7201LA-25NP by Texas Instruments is a FIFO with 512x9 organization, 35ns cycle time, and 28.5MHz max clock frequency. It operates at 5V, has a temp range of 0-70°C, and is ideal for parallel memory applications due to its CMOS technology and 3-STATE output characteristics.
SN74ACT7202LA25NP
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
SN74V263-6PZA
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 80; Package Code: LQFP; Package Shape: SQUARE; Qualification: Not Qualified;
SN74V215-10PAG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE; JESD-609 Code: e4;
SN74V245-15PAGEP
OTHER FIFO; Temperature Grade: MILITARY; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE; Parallel or Serial: PARALLEL;
SN74V215-20PAG
SN74V215-20PAG by Texas Instruments is a FIFO memory IC with 512x18 organization and 512 words code. It operates synchronously with a cycle time of 20 ns and has a max clock frequency of 133 MHz. This IC is commonly used in applications that require high-speed data buffering and storage.
SN74V283-15PZA
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 80; Package Code: LQFP; Package Shape: SQUARE; Maximum Standby Current: .015 Amp;
SN74ALVC7803-40DL
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 56; Package Code: SSOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 70 Cel;
SN74ABT7819A-15PN
SN74ABT7819A-15PN by Texas Instruments is a 512KX18 BI-DIRECTIONAL FIFO with a cycle time of 15 ns and max clock frequency of 67 MHz. It is commonly used in applications requiring high-speed data buffering and storage.
SN74ABT7819A-30PH
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 80; Package Code: QFP; Package Shape: RECTANGULAR; Organization: 512KX18;
SN74V235-10PAG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE; Surface Mount: YES;
SN74ABT7819A-10PN
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 80; Package Code: LFQFP; Package Shape: SQUARE; Cycle Time: 10 ns;
SN74ABT7819A-15PH
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 80; Package Code: QFP; Package Shape: RECTANGULAR; Minimum Operating Temperature: 0 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved