Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Cellular Telephone Circuits; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
Median Price
$6.030
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Farnell
1+ parts
100+ parts
$4.350
1k+ parts
$4.190
10k+ parts
-
Digiode
Nova Conductors
Vyrian
GLYN GmbH & Co. KG
Corohmni
$11.363
Advanced Electronics
$12.014
Ampacity Inc.
$756.000
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Corphita
Cellphone ICs WFM200S022XNA2 attributes and parameters. Explore more Cellphone ICs devices from Silicon Labs
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
WFM200S022XNA2 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rochester Electronics
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Bkc Semiconductors
CC110LRGPT
The Texas Instruments CC110LRGPT is a cellphone IC with 20 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features RF and baseband circuits, operates at 3V, with data rate of 0.6 Mbps for wireless communication applications.
SARA-U201-04B-00
U-blox Ag
SARA-U201-04B-00 by U-blox Ag is a CELLPHONE IC with 96 terminals in RECTANGULAR CHIP CARRIER package. It operates b/w -20 to 65 °C, suitable for TELECOM CIRCUITS with 3.8V supply voltage.
ADL5502ACBZ-P7
Analog Devices
ADL5502ACBZ-P7 by Analog Devices is a CELLPHONE IC with BICMOS tech. Features include 3V supply, -40 to 85°C temp range, and RF/BASEBAND circuit type. Its GRID ARRAY package has 8 terminals, 0.5mm pitch, and measures 1.46mm in length/width for telecom applications.
AD9986BBPZ-4D2AC
AD9986BBPZ-4D2AC by Analog Devices is a Cellphone IC with 324 terminals in a square package. It operates b/w -40 to 120 °C, consuming 4070mA at 1V. This RF and baseband circuit is ideal for mobile phone applications due to its compact size and high performance capabilities.
CC2510F16RHHR
CC2510F16RHHR by Texas Instruments is a Cellphone IC with 36 terminals in a square package. It operates at temperatures ranging from -40 to 85°C and has a supply voltage of 3V. This RF and baseband circuit technology features CMOS, no-lead terminals, and is suitable for industrial telecom applications.
CC2510F8RSP
Texas Instruments CC2510F8RSP is a cellphone IC with 36 terminals, operating at -40 to 85°C. It features a 3V supply voltage, CMOS technology, and RF/baseband circuit for telecom applications. The chip carrier package has a very thin profile, nickel palladium gold finish, and quad terminal position.
CC2420Z-RTR1
CC2420Z-RTR1 by Texas Instruments is a cellphone IC with 48 terminals, operating at -40 to 85°C. It features a supply voltage of 1.8V, CMOS technology, and RF/baseband circuitry. This square-shaped chip carrier is surface-mountable and suitable for industrial applications requiring a compact form factor.
HMC420QS16ETR
Analog Devices' HMC420QS16ETR is a 16-terminal cellphone IC with PLASTIC/EPOXY body, suitable for RF and baseband circuits. It operates b/w -40 to 85 °C, with a nominal voltage of 5V. The small outline package measures 4.9mm x 3.9mm x 1.75mm, making it ideal for telecom applications requiring compact components.
GC5018IZDL
Texas Instruments GC5018IZDL is a Cellphone IC with 305 terminals in a square grid array package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features CMOS technology, RF and baseband circuit for telecom applications.
CC2420-RTR1
CC2420-RTR1 by Texas Instruments is a cellphone IC with 48 terminals, operating at -40 to 85°C. It features a supply voltage of 1.8V, RF and baseband circuitry, and CMOS technology. Ideal for telecom applications, this surface-mount chip carrier has a compact square package style with nickel palladium gold finish.
HMC6001LP711E
Analog Devices' HMC6001LP711E is a 60-terminal cellphone IC in a rectangular chip carrier package. It operates b/w -40°C to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 2.7V, making it ideal for telecom applications.
TLV321AC37IN
TLV321AC37IN by Texas Instruments is a CELLPHONE IC with 20 terminals in RECTANGULAR PLASTIC/EPOXY package. It operates b/w -40 to 85 °C, suitable for INDUSTRIAL use. This BASEBAND CIRCUIT has a nominal voltage of 3 V and CMOS technology.
CC1021RSST
The Texas Instruments CC1021RSST is a cellphone IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a data rate of 0.1536 Mbps, making it ideal for telecommunications applications.
TRF3040PT
TRF3040PT by Texas Instruments is a 48-terminal cellphone IC with 3.75V supply voltage, suitable for RF and baseband circuits. It features a flatpack, low profile package style with gull wing terminals, operating b/w -40 to 85°C. Ideal for telecom applications requiring a compact square-shaped surface-mount design.
NRF9160-SIAA-B1A-R7
Nordic Semiconductor Asa
Nordic Semiconductor's NRF9160-SIAA-B1A-R7 is a cellular IC with RF and baseband circuit, operating at -40 to 85°C. It features a grid array package style, 127 terminals, and 3.8V supply voltage. Ideal for telecom applications requiring compact design and industrial temperature range.
CC1110F16RSP
The Texas Instruments CC1110F16RSP is a cellphone IC with 36 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3V. This RF and baseband circuit has a terminal pitch of 0.5mm and is suitable for industrial applications.
MAX2387EGC+T
MAX2387EGC+T by Analog Devices is a cellphone IC with 12 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85 °C, suitable for industrial use. It integrates RF and baseband circuits, operates at 2.7V, and has a terminal pitch of 0.5mm for compact designs.
MAX2685EEE+
MAX2685EEE+ by Analog Devices is a 16-terminal cellphone IC with industrial temperature grade. It features RF and baseband circuits, operates at 3V, and has a peak reflow temp of 260 °C. Ideal for telecom applications requiring small outline packaging and surface mount capability.
RFFM6903TR13
Rf Micro Devices
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BUTT; No. of Terminals: 28; Package Code: HLGA; Package Shape: SQUARE;
HMC900LP5ETR
Analog Devices' HMC900LP5ETR is a cellphone IC with 32 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85 °C, suitable for industrial use. It features a nominal voltage of 5V and is ideal for baseband circuit applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
WFM200S022XNN2
Silicon Labs
Cellular Telephone Circuits; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
WFM200S022XNA2R
Cellular Telephone Circuits; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
WFM200S022XNN2R
WFM200SS22XNA2R
WFM200SS22XNN2R
WFM200SS22XNN2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved