Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Cellular Telephone Circuits; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Authorized Procurement Solutions
Corphita
Cellphone ICs WFM200S022XNN2R attributes and parameters. Explore more Cellphone ICs devices from Silicon Labs
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
WFM200S022XNN2R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Semitronics
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Excel (Suzhou) Semiconductor
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
SPC TECHNOLOGY/ MULTICOMP
EU2B-YS303C
Idec
ROTARY SWITCH;
CC1000YZ
CC1000YZ by Texas Instruments is a cellphone IC with 28 terminals in a rectangular grid array package. Operating at temperatures from -40 to 85°C, it features CMOS technology and RF/baseband circuitry for telecom applications. With a thin profile of 0.652mm, it supports power supplies of 2.5/3.3V for industrial-grade performance.
TRF370317IRGETG4
TRF370317IRGETG4 by Texas Instruments is a cellphone IC with 24 terminals, operating at -40 to 85°C. It features a supply voltage of 5V, RF and baseband circuit for telecom applications, and a compact square package style suitable for industrial use.
LMV226URX/NOPB
RF AND BASEBAND CIRCUIT; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e1; Terminal Finish: TIN SILVER COPPER;
HL7692
Sierra Wireless
Sierra Wireless' HL7692 is a surface-mount RF and baseband circuit IC with 146 terminals in a grid array package. Operating b/w -40°C to 85°C, it has a compact size of 22mm width and 23mm length, making it ideal for cellphone applications requiring high-performance telecom capabilities.
MAX19997AETX+
Analog Devices
MAX19997AETX+ by Analog Devices is a Cellphone IC with BICMOS tech, 36 terminals in a square package. Operating temp range -40 to 85 °C, Telecom RF Front End Circuit for industrial use at 3.3V supply voltage.
ADRF6658BCPZ-RL7
Analog Devices' ADRF6658BCPZ-RL7 is a cellphone IC with 48 terminals in a square chip carrier package. It operates b/w -40 °C to 105°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 3.3V, making it ideal for telecom applications.
MAX2690EUB+T
MAX2690EUB+T by Analog Devices is a cellphone IC with 10 terminals in a small outline, thin profile package. Operating temperature ranges from -40 to 85 °C, making it suitable for industrial telecom applications. It features RF and baseband circuits with a nominal voltage of 3V.
RFX2402E
Skyworks Solutions
RFX2402E by Skyworks Solutions is a cellphone IC with 16 terminals in a square chip carrier package. Operating temperature ranges from -40 to 125°C, suitable for automotive applications. This RF and baseband circuit operates at 3.3V with CMOS technology, ideal for telecom devices.
ADF4360-9BCPZ
Analog Devices' ADF4360-9BCPZ is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates at -40 to 85°C, with a supply voltage of 3.3V and terminal pitch of 0.5mm. Ideal for baseband circuits, it features matte tin finish and very thin profile for industrial telecom applications.
CC2591RGVT
The Texas Instruments CC2591RGVT is a cellphone IC with 16 terminals in a square chip carrier package. It operates at temperatures ranging from -40 to 85°C, with a supply voltage of 3V and max current of 4mA. This RF front end circuit has a terminal pitch of 0.65mm and is suitable for industrial applications requiring very thin profile components.
HMC686LP4
Analog Devices' HMC686LP4 is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial telecom applications. The RF and baseband circuit has a nominal voltage of 5V, making it ideal for surface mount designs.
ADF4360-2BCPZRL7
Analog Devices' ADF4360-2BCPZRL7 is a Cellphone IC with 24 terminals, operating at 3.3V. It features BICMOS technology, -40 to 85°C temperature range, and matte tin finish. Ideal for baseband circuits in telecom applications due to its compact square package and low profile design.
MAX5863E/D
Analog Devices' MAX5863E/D is a cellphone IC with CMOS technology, operating b/w -40 °C to 85°C. It features a 3V supply voltage, suitable for RF and baseband circuits. This surface-mount chip has tin-lead finish and is ideal for industrial telecom applications.
TRF4903PWR
TRF4903PWR by Texas Instruments is a cellphone IC with 24 terminals, operating voltage of 2.7V, and low supply current of 0.043mA. It features RF and baseband circuits for telecom applications. The package is small outline, thin profile, suitable for surface mount with a rectangular shape made of plastic/epoxy material.
MAX19995AETX+
MAX19995AETX+ by Analog Devices is a Cellphone IC with BICMOS tech. It operates b/w -40 to 85 °C, has 36 terminals in a square package style, and requires 5V supply voltage. Ideal for RF and baseband circuits in telecom applications due to its small form factor and high-temperature tolerance.
TRF370333IRGER
TRF370333IRGER by Texas Instruments is a cellphone IC with 24 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 5V and max current of 235mA. This RF and baseband circuit has a terminal pitch of 0.5mm, making it suitable for industrial telecom applications.
MAX5864E/D
Analog Devices' MAX5864E/D is a cellphone IC with CMOS technology, operating from -40 to 85 °C. It features an unencased chip package, tin-lead terminal finish, and 3V supply voltage. Ideal for RF and baseband circuits in industrial-grade telecom applications.
ADF4360-2BCPZRL
Analog Devices' ADF4360-2BCPZRL is a cellphone IC with 24 terminals, operating at -40 to 85°C. It features a 3.3V supply, BICMOS technology, and matte tin finish. This square chip carrier is ideal for baseband circuits in industrial telecom applications due to its compact size and low profile design.
MAX2055EUP+T
Analog Devices' MAX2055EUP+T is a BICMOS technology-based Cellphone IC with 20 terminals in a small outline package. It operates b/w -40 to 85 °C, suitable for industrial telecom applications. The IC has a nominal voltage of 5V and peak reflow temperature of 260°C, making it ideal for baseband circuit integration.
AFSC5G23D37T2
NXP Semiconductors
RF AND BASEBAND CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved