Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BGM113A256V21 by Silicon Labs is a telecom IC with 36 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for industrial applications requiring a surface mount rectangular package style with a terminal pitch of 0.8mm.
Median Price
$9.470
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Symmetry
1+ parts
$6.380
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$10.570
$8.540
$7.870
DigiKey
Verical
$8.369
$3.673
Digiode
$6.061
Nova Conductors
$7.125
Vyrian
VNN
Semicontronic
$5.420
$5.284
$5.257
Corphita
$5.742
Aztec Data Supply Inc.
$6.300
Continental Prestige Electronics
$7.120
$6.978
Bastille Electronics
$6.769
$6.341
AZTECH Wire
$7.828
Ampacity Inc.
$11.800
Corohmni
$12.793
Advanced Electronics
$20.459
$18.618
$16.776
GreenTree Electronics
Argo Parts USA
Being surface mountable makes it easier to integrate this IC into compact electronic devices, saving space and simplifying the manufacturing process.
The rectangular shape of the package provides mechanical stability and ease of handling during assembly, improving overall reliability.
With 36 terminals, this IC offers a wide range of connectivity options, allowing for versatile applications in telecom interfaces.
The high maximum operating temperature ensures stable performance even under challenging environmental conditions, increasing the reliability of the product.
The nominal supply voltage of 3.3 V is a common standard in many electronic devices, making it compatible with a wide range of existing systems.
Other Function Telecom Interface ICs BGM113A256V21 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
BGM113A256V21 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Dev 12/Oct/2022
PCN Assembly/Origin - Multi Dev 28/Sep/2022
PCN Packaging - Multi Devices 15/Jan/2019
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Panjit International
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Semitronics
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Surge Components
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
XB3-24Z8UT
Digi International
The Digi International XB3-24Z8UT is an industrial-grade telecom circuit with 20 terminals in a through-hole package. It operates b/w -40°C to 85°C, making it suitable for various telecom interface applications. This MICROELECTRONIC ASSEMBLY offers reliable performance in harsh environments.
BT121-A-V2
Silicon Labs
BT121-A-V2 by Silicon Labs is a telecom IC with 33 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1mm. This surface-mount IC is ideal for industrial applications requiring compact MICROELECTRONIC ASSEMBLY packages.
450-0178R
Ls Research
TELECOM CIRCUIT;
AD9832BRUZ-REEL7
Analog Devices
AD9832BRUZ-REEL7 by Analog Devices is a Telecom Interface IC with 16 terminals. It operates b/w -40 to 85°C, consuming 5mA at 3.3V. This CMOS technology-based IC is ideal for telecom circuits due to its small outline and dual terminal position.
MAX2769CETI+
Maxim Integrated
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
BQ51013BRHLR
Texas Instruments
BQ51013BRHLR by Texas Instruments is a Telecom Interface IC with 20 terminals, operating temperature range of -40 to 125°C, and supply voltage of 5V. It is used in automotive applications for telecom circuits, offering data rate of 0.002 Mbps and MSL level of 2.
WL1805MODGBMOCT
WL1805MODGBMOCT by Texas Instruments is a telecom interface IC with 100 terminals in a rectangular grid array package. Operating at -20 to 70°C, it supports data rates up to 100 Mbps at 3.7V supply voltage. Ideal for commercial applications requiring high-speed telecommunications functionality.
SA602AD/01
SA602AD/01 by NXP Semiconductors is an 8-terminal telecom interface IC in a small outline package. With a supply voltage of 6V, it operates b/w -40°C to 85°C. Featuring gull wing terminals and nickel palladium gold silver finish, it's ideal for telecom circuit applications.
AD9364BBCZREEL
AD9364BBCZREEL by Analog Devices is a 144-terminal telecom IC with a supply voltage of 1.8V, operating b/w -40 to 85°C. It features a grid array package style and is suitable for telecom circuit applications requiring low profile and fine pitch components.
SN65DSI85TPAPRQ1
SN65DSI85TPAPRQ1 by Texas Instruments is a telecom interface IC with 64 terminals in a square package. It operates b/w -40 to 105°C, with a data rate of 1 Mbps and nominal voltage of 1.8V. Ideal for industrial applications requiring high-speed communication in compact spaces.
RN41-I/RM
Microchip Technology
Microchip Technology's RN41-I/RM is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and matte tin finish, suitable for industrial applications requiring surface mount packaging in a compact rectangular shape.
SN65DSI83ZQER
SN65DSI83ZQER by Texas Instruments is a telecom interface IC with 64 terminals in a grid array package. It operates b/w -40 to 85°C, has a data rate of 1 Mbps, and requires a nominal voltage of 1.8V. This IC is suitable for industrial applications requiring thin profile and fine pitch components.
MAX3946ETG+T
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
RN4871-V/RM118
RN4871-V/RM118 by Microchip Tech is a TS 16949-certified IC with 16 terminals, operating at -20 to 70°C. It's a telecom circuit with 3V supply voltage, supporting data rates up to 0.01 Mbps. Ideal for applications requiring compact size and surface mount compatibility.
ESP32-WROVER(8MB)
Espressif Systems (shanghai)
ESP32-WROVER(8MB) by Espressif Systems is a telecom IC with 150 Mbps data rate, operating at -40 to 85°C. It has 38 terminals, measures 31.4x18mm, and requires 3.3V supply voltage. Ideal for industrial applications requiring high-speed data transmission in compact spaces.
BL652-SA-01-T/R
Laird Technologies
BL652-SA-01-T/R by Laird Technologies is a surface mount telecom IC with 39 terminals. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It has a nominal voltage of 3.3V and compact dimensions of 14x10x2.2mm, making it ideal for telecom circuit applications.
CC1175RHBT
The Texas Instruments CC1175RHBT is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and data rate of 0.2 Mbps. This chip carrier package is suitable for industrial applications requiring a compact design and surface mount capability.
XB3-24Z8ST-J
XB3-24Z8ST-J by Digi Int. is a telecom IC with 20 terminals in MICROELECTRONIC ASSEMBLY package. Operating temp range -40 to 85°C, suitable for INDUSTRIAL applications. Features THROUGH-HOLE terminals and DUAL position, ideal for TELECOM CIRCUIT designs.
BGM240SA22VNA2
453-00060C
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGM111A256V21R
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Length: 15 mm;
BGM13P22F512GE-V2
BGM111A256V2R
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
BGM13P22F512GA-V2R
BGM113A256V2R
BGM113A256V2R by Silicon Labs is a telecom IC with 36 terminals, operating temperature range of -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 0.8mm. This surface-mount IC is ideal for industrial applications requiring compact microelectronic assemblies.
BGM11S22F256GA-V2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4; Terminal Finish: NICKEL GOLD;
BGM111A256V21
BGM111A256V21 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial telecom circuit applications due to its compact size and temperature range.
BGM111A256V2
BGM111A256V2 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial applications requiring reliable telecom circuit interfaces.
BGM13P22F512GA-V2
BGM113A256V21R
BGM113A256V21R by Silicon Labs is a telecom IC with 36 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for industrial applications requiring a surface mount rectangular package style with a seated height of 2mm.
BGM113A256V2
BGM113A256V2 by Silicon Labs is a telecom IC with 36 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 0.8mm. This rectangular microelectronic assembly is ideal for industrial applications requiring telecom circuit interfaces.
BGM123A256V2R
BGM123A256V2R by Silicon Labs is a telecom IC with 56 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for telecom circuit applications in industrial settings due to its compact square package style and surface mount capability.
BGM121A256V2R
BGM121A256V2R by Silicon Labs is a surface mount telecom interface IC with 1 function. It has a square package shape, 56 terminals, and a max seated height of 1.4mm. This industrial-grade IC operates at temperatures ranging from -40 to 85°C and has a nominal voltage of 3.3V.
BGM15MA12E6327XTSA1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: VQCCN; Package Shape: RECTANGULAR;
BGM121A256V2
Silicon Labs' BGM121A256V2 is a telecom IC with 56 terminals, operating from -40 to 85°C. It has a nominal voltage of 3.3V and is designed for industrial-grade applications. The surface-mountable square package measures 6.5mm x 6.5mm x 1.4mm, making it suitable for compact telecom interface solutions.
BGM15HA12E6327XTSA1
BGM15LA12E6327XTSA1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BUTT; No. of Terminals: 12; Package Code: BCC; Package Shape: RECTANGULAR;
BGM13P22F512GE-V2R
BGM123A256V2
Silicon Labs BGM123A256V2 is a telecom IC with 56 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and MSL level of 3. Suitable for industrial applications, it comes in a square package style measuring 6.5mm x 6.5mm x 1.4mm, making it ideal for surface mount assembly processes up to 260°C peak reflow temperature within 40 seconds.
BGM113A256V1R
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Shape: RECTANGULAR; Terminal Position: UNSPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved