Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BGM111A256V2R by Silicon Labs is a telecom IC with 31 terminals, operating b/w -40°C to 85°C. It has a supply voltage of 3.3V and compact dimensions of 12.9mm width and 15mm length. Ideal for industrial applications requiring a surface-mount rectangular package with a terminal pitch of 1.2mm.
Median Price
$7.777
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Symmetry
1+ parts
$6.600
100+ parts
-
1k+ parts
10k+ parts
Arrow
$8.284
DigiKey
$11.220
$8.532
$8.111
Mouser Electronics
$12.390
$8.310
$7.310
Chip1Stop
$6.320
Verical
$7.270
Nova Conductors
$7.370
Digiode
$11.305
Vyrian
TME
$10.170
Chip Stock
VNN
Cyclops Electronics Ltd
Semicontronic
$4.560
$4.446
$4.423
Ampacity Inc.
Advanced Electronics
$6.920
$6.574
Continental Prestige Electronics
$7.092
$6.950
Aranea Global
$7.223
$6.934
Corphita
$10.710
Aztec Data Supply Inc.
$11.470
Corohmni
$12.373
RC Electronics
Authorized Procurement Solutions
Futuretech Components
Perfect Parts
Argo Parts USA
Allows for easy and efficient soldering onto a PCB, making it suitable for automated assembly processes.
Rectangular shape provides space-saving design aspects and efficient use of PCB real estate.
Provides a sufficient number of connection points for various functions and features.
Ensures a compact and reliable package for the telecom interface IC, suitable for high-density applications.
Wide operating temperature range allows for use in industrial environments with varying temperature conditions.
Can withstand extremely low temperatures, making it suitable for outdoor or harsh environments.
Low profile design helps in space-constrained applications and allows for compact electronic devices.
Compact width dimension enables the integration of the IC in narrow spaces on the PCB.
Optimal length for accommodating the necessary circuitry and features without unnecessary waste of board space.
Designed to meet industrial temperature requirements, ensuring reliability and durability in harsh conditions.
Lead-free terminals comply with environmental regulations and are suitable for RoHS compliant applications.
Specifically designed for telecom applications, ensuring compatibility and optimized performance in telecommunications systems.
Standard operating voltage for compatibility with a wide range of telecom systems and power sources.
Optimal terminal pitch for easy soldering and connection, ensuring reliability and ease of installation during PCB assembly.
Other Function Telecom Interface ICs BGM111A256V2R attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
BGM111A256V2R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - BGM111y Datasheet Rev 12/Dec/2019 Mult Dev 12/Oct/2022
PCN Assembly/Origin - GM111A Site Add 24/May/2023
PCN Packaging - Multi Devices 15/Jan/2019
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
General Diode
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Excel (Suzhou) Semiconductor
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
EC25EUXGA-128-SGNS
Quectel Wireless Solutions
Quectel Wireless Solutions EC25EUXGA-128-SGNS is a telecom IC with 150 Mbps data rate, operating at -35 to 75°C. With 144 terminals and 3.8V supply voltage, it's ideal for high-speed communication applications in commercial extended temperature environments.
BQ51013ARHLT
BQ51013ARHLT by Texas Instruments is a Telecom IC with 20 terminals, operating at -40 to 125°C. It has a data rate of 0.002 Mbps and nominal voltage of 5V. Ideal for telecom circuits, this chip carrier package is surface mountable with Ni/Pd/Au terminal finish.
RN4678-V/RM113
Microchip Technology
RN4678-V/RM113 by Microchip Tech is a surface mount telecom IC with 33 terminals in a rectangular package. Operating temp range from -20 to 70°C, nominal voltage of 1.9V. Ideal for telecom circuits due to its compact size and gold over nickel terminal finish.
SN65DSI86IPAPQ1
SN65DSI86IPAPQ1 by Texas Instruments is a telecom interface IC with 64 terminals in a square package. It operates b/w -40 to 85°C, with terminal finish of NiPdAu. This IC is suitable for industrial applications requiring a nominal voltage of 1.2V and features gull wing terminal form.
AD8015ARZ-REEL7
Analog Devices
AD8015ARZ-REEL7 by Analog Devices is an 8-terminal IC with a max supply current of 26mA and nominal voltage of 5V. It operates in industrial temperature range (-40 to 85°C) and is ideal for telecom circuits due to its small outline package and matte tin terminal finish.
CC-WMX-JN58-NE
Digi International
TELECOM CIRCUIT;
LBEE5QD1ZM-572
Murata Manufacturing
ST60-2230C-P
Laird Technologies
EM357-RTR
Silicon Labs
Silicon Labs' EM357-RTR is a telecom IC with 48 terminals in a square chip carrier package. It operates b/w -40°C to 85°C, suitable for industrial use. With a nominal voltage of 1.25V, it's ideal for telecom circuit applications requiring surface mount technology.
ADRF5044BCCZN
Analog Devices' ADRF5044BCCZN is a 24-terminal SQUARE IC with -40 to 85°C temp range. Ideal for TELECOM CIRCUITS, it operates at 3.3V, has a 0.5mm terminal pitch, and MSL of 3.
BLUENRG-MSCSP
BLUENRG-MSCSP by STMicroelectronics is a telecom IC with 34 terminals, operating at -40 to 85°C. Its grid array package has a very thin profile and fine pitch, suitable for industrial applications requiring a 3V supply voltage. The IC is designed for surface mount assembly in compact devices due to its small dimensions of 2.56mm width and 2.66mm length.
XB3-24ARM
The Digi International XB3-24ARM is a TELECOM CIRCUIT with 1 Mbps Data Rate. It operates b/w -40°C to 85°C, making it suitable for various telecom applications. The RECTANGULAR package style and SPECIAL SHAPE design enhance its performance in Other Function Telecom Interface ICs.
MAX2769CETI+T
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
MAX2769CETI+
TELECOM CIRCUIT; Terminal Finish: Matte Tin (Sn) - annealed; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
CYBLE-222014-01
Infineon Technologies
CYBLE-222014-01 by Infineon Technologies is a surface mount telecom IC with 22 terminals. It operates at temperatures ranging from -40 to 85 °C and has a seated height of 1.9 mm. This IC is commonly used in industrial applications requiring a nominal voltage of 3.3 V.
ODIN-W260-03B
U-blox Ag
TELECOM CIRCUIT; Peak Reflow Temperature (C): 245; Moisture Sensitivity Level (MSL): 4;
CC2520RHDRG4
CC2520RHDRG4 by Texas Instruments is a Telecom IC with 28 terminals, operating b/w -40 to 125°C. It features a data rate of 0.25 Mbps, suitable for automotive applications due to its CMOS technology and 3V supply voltage requirement. The package style is chip carrier with a very thin profile, making it ideal for surface mount applications.
M2-MAYA-W166-10C
MGM240SD22VNA2
MGM240PB22VNA3
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGM111A256V21R
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Length: 15 mm;
BGM13P22F512GE-V2
BGM13P22F512GA-V2R
BGM113A256V2R
BGM113A256V2R by Silicon Labs is a telecom IC with 36 terminals, operating temperature range of -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 0.8mm. This surface-mount IC is ideal for industrial applications requiring compact microelectronic assemblies.
BGM11S22F256GA-V2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4; Terminal Finish: NICKEL GOLD;
BGM111A256V21
BGM111A256V21 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial telecom circuit applications due to its compact size and temperature range.
BGM111A256V2
BGM111A256V2 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial applications requiring reliable telecom circuit interfaces.
BGM13P22F512GA-V2
BGM113A256V21R
BGM113A256V21R by Silicon Labs is a telecom IC with 36 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for industrial applications requiring a surface mount rectangular package style with a seated height of 2mm.
BGM113A256V2
BGM113A256V2 by Silicon Labs is a telecom IC with 36 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 0.8mm. This rectangular microelectronic assembly is ideal for industrial applications requiring telecom circuit interfaces.
BGM123A256V2R
BGM123A256V2R by Silicon Labs is a telecom IC with 56 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for telecom circuit applications in industrial settings due to its compact square package style and surface mount capability.
BGM113A256V21
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Shape: RECTANGULAR; Length: 15.73 mm;
BGM121A256V2R
BGM121A256V2R by Silicon Labs is a surface mount telecom interface IC with 1 function. It has a square package shape, 56 terminals, and a max seated height of 1.4mm. This industrial-grade IC operates at temperatures ranging from -40 to 85°C and has a nominal voltage of 3.3V.
BGM15MA12E6327XTSA1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: VQCCN; Package Shape: RECTANGULAR;
BGM121A256V2
Silicon Labs' BGM121A256V2 is a telecom IC with 56 terminals, operating from -40 to 85°C. It has a nominal voltage of 3.3V and is designed for industrial-grade applications. The surface-mountable square package measures 6.5mm x 6.5mm x 1.4mm, making it suitable for compact telecom interface solutions.
BGM15HA12E6327XTSA1
BGM15LA12E6327XTSA1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BUTT; No. of Terminals: 12; Package Code: BCC; Package Shape: RECTANGULAR;
BGM13P22F512GE-V2R
BGM123A256V2
Silicon Labs BGM123A256V2 is a telecom IC with 56 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and MSL level of 3. Suitable for industrial applications, it comes in a square package style measuring 6.5mm x 6.5mm x 1.4mm, making it ideal for surface mount assembly processes up to 260°C peak reflow temperature within 40 seconds.
BGM111A256V1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Terminal Pitch: 1.2 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved