Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BGM111A256V2 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial applications requiring reliable telecom circuit interfaces.
Median Price
$9.128
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$1.806
100+ parts
$1.718
1k+ parts
-
10k+ parts
Symmetry
$6.070
Chip1Stop
$8.070
Element14
$7.549
$7.400
Farnell
$9.591
$7.319
$7.177
Mouser Electronics
$12.870
$8.920
$8.420
Newark
$14.140
$10.190
$9.690
Verical
Digiode
$5.766
Nova Conductors
$8.069
Chip Stock
Vyrian
VNN
TME
$11.322
Ampacity Inc.
$5.160
Semicontronic
$5.031
$5.005
Corphita
$5.463
Corohmni
$7.416
Aranea Global
$7.908
$7.592
Aztec Data Supply Inc.
$9.450
Advanced Electronics
$11.792
$11.203
Continental Prestige Electronics
$11.810
$7.220
Microchip USA
$30.800
$30.360
$30.140
$29.920
Lixinc
Authorized Procurement Solutions
Argo Parts USA
Assy Fe
Futuretech Components
Perfect Parts
This feature allows for easy and efficient installation on PCBs, making it convenient for manufacturing processes.
The rectangular shape offers a compact design, saving space and allowing for easier integration into circuit layouts.
With a high number of terminals, this product can accommodate a wide range of connections and functionalities, increasing versatility.
The microelectronic assembly package style provides durability and reliability, ensuring long-lasting performance.
The high maximum operating temperature allows for stable and consistent performance even in harsh environmental conditions.
The low minimum operating temperature ensures reliable operation in cold environments, making it suitable for various applications.
The low maximum seated height enables a more compact overall design, making it ideal for space-constrained applications.
The compact width of the product allows for efficient use of board space and facilitates easy integration into existing systems.
The moderate length provides a balance between functionality and space-saving design, offering versatility in various applications.
The industrial temperature grade ensures reliability and robust performance, making it suitable for demanding industrial environments.
The no-lead terminal form reduces the risk of soldering defects and offers better electrical performance, ensuring reliable connections.
Designed specifically for telecom circuits, this product offers optimized performance and compatibility for telecommunications applications.
The standard 3.3V supply voltage simplifies power requirements and compatibility with other components, making it easy to integrate into existing systems.
The small terminal pitch allows for high-density mounting, maximizing board space utilization and enabling complex circuit designs.
Other Function Telecom Interface ICs BGM111A256V2 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
BGM111A256V2 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - BGM111y Datasheet Rev 12/Dec/2019 Mult Dev 12/Oct/2022
PCN Assembly/Origin - GM111A Site Add 24/May/2023
PCN Packaging - Multi Devices 15/Jan/2019
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
PIC18F4550-I/PT
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
Hy Electronic
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
1554216002
Molex
WIRE AND CABLE;
BT840XE
Fanstel
Fanstel's BT840XE is a surface mount telecom IC with 61 terminals, operating b/w -40 to 85°C. With a nominal voltage of 3.3V, it offers a data rate of 2 Mbps. Ideal for applications requiring high-speed telecommunications in compact spaces.
NRF51822-CFAC-R
Nordic Semiconductor Asa
NRF51822-CFAC-R by Nordic Semiconductor Asa is a telecom IC with 62 terminals in a square package. It operates b/w -25°C to 75°C, with a supply voltage of 1.8V. Ideal for applications requiring fine pitch and thin profile grid array packages.
BLUENRG-132
STMicroelectronics
BLUENRG-132 by STMicroelectronics is a 32-terminal telecom IC with a nominal voltage of 3V. It operates in industrial temperature range (-40 to 105°C) and has a compact square package style (5x5mm). Ideal for telecom circuits, it features surface mount capability and quad terminal position.
MAX5980GTJ+
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
PN5180A0ET/C2QL
NXP Semiconductors
TELECOM CIRCUIT; Terminal Finish: TIN SILVER COPPER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e1;
ATWILC3000-MR110UA
ATWILC3000-MR110UA by Microchip Technology is a telecom IC with 36 terminals, operating at 3.3V. It offers a data rate of 65 Mbps and operates b/w -40 to 85°C. Ideal for applications requiring high-speed wireless communication in compact devices.
WFM200S022XNA3R
Silicon Labs
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
RN4678-V/RM122
RN4678-V/RM122 by Microchip Technology is a telecom IC with 33 terminals, operating b/w -20°C to 70°C. It has a supply voltage of 1.9V and compact dimensions of 12mm width, 22mm length, and 2.46mm height. Ideal for surface mount applications in telecom circuits due to its no-lead terminal form and rectangular package style.
PN7160B1HN/C100Y
PN7160B1HN/C100Y by NXP Semiconductors is a telecom IC with 40 terminals in a square chip carrier package. Operating b/w -25°C to 85°C, it has a data rate of 0.848 Mbps and nominal voltage of 1.8V. Ideal for telecom circuits, this IC is surface mountable and has a max seated height of 1mm.
CC2500RGPR
CC2500RGPR by Texas Instruments is a telecom IC with 20 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and data rate of 0.25 Mbps, suitable for industrial applications requiring a compact chip carrier package with surface mount capability.
CC2640F128RSMT
CC2640F128RSMT by Texas Instruments is a telecom IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a nominal voltage of 3V. Ideal for telecom circuits, it features a terminal pitch of 0.4mm and no-lead terminal form for industrial applications.
SIM900D
Simcom Wireless Solutions
SIM900D by Simcom Wireless Solutions is a telecom IC with 0.0856 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has 48 terminals in a square package shape. Ideal for telecom applications requiring high-speed data transmission.
ZOE-M8Q-0-10
U-blox Ag
ZOE-M8Q-0-10 by U-blox Ag is a telecom IC with 51 terminals, operating at -40 to 85°C. It features a 3V supply voltage, 0.5mm terminal pitch, and AEC-Q100 screening for industrial applications. This surface-mount device in square package shape is ideal for compact telecom circuit designs.
RN42N-I/RM
RN42N-I/RM by Microchip Technology is a telecom IC with 35 terminals, operating temperature range of -40 to 85°C, and data rate of 3 Mbps. It is a surface mount device suitable for industrial applications requiring a nominal voltage of 3.3V.
RN4871-V/RM118
RN4871-V/RM118 by Microchip Tech is a TS 16949-certified IC with 16 terminals, operating at -20 to 70°C. It's a telecom circuit with 3V supply voltage, supporting data rates up to 0.01 Mbps. Ideal for applications requiring compact size and surface mount compatibility.
AD9874ABSTZ
Analog Devices
AD9874ABSTZ by Analog Devices is a telecom IC with 48 terminals in a square flatpack package. It operates b/w -40°C to 85°C, with a nominal voltage of 3V. Ideal for telecom circuits, it features gull wing terminals and matte tin finish, suitable for industrial temperature grade applications.
TLV320AIC3104IRHBT
TLV320AIC3104IRHBT by Texas Instruments is a telecom interface IC with 2 channels and a nominal voltage of 1.8V. It has a package style of chip carrier, heat sink/slug, very thin profile and can operate in industrial temperature range (-40 to 85°C). This IC is commonly used in telecom circuits.
EQCO62R20.3
Microchip Technology EQCO62R20.3 is a telecom IC with 16 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, with terminal finish of Ni/Pd/Au. Ideal for telecom circuit applications requiring low profile and industrial-grade reliability.
CYBLE-222014-01
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 22; Package Shape: SQUARE; Package Style (Meter): MICROELECTRONIC ASSEMBLY;
ISL32275EFVZ-T
Intersil
TELECOM CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGM111A256V21R
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Length: 15 mm;
BGM13P22F512GE-V2
TELECOM CIRCUIT;
BGM111A256V2R
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
BGM13P22F512GA-V2R
BGM113A256V2R
BGM113A256V2R by Silicon Labs is a telecom IC with 36 terminals, operating temperature range of -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 0.8mm. This surface-mount IC is ideal for industrial applications requiring compact microelectronic assemblies.
BGM11S22F256GA-V2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4; Terminal Finish: NICKEL GOLD;
BGM111A256V21
BGM111A256V21 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial telecom circuit applications due to its compact size and temperature range.
BGM13P22F512GA-V2
BGM113A256V21R
BGM113A256V21R by Silicon Labs is a telecom IC with 36 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for industrial applications requiring a surface mount rectangular package style with a seated height of 2mm.
BGM113A256V2
BGM113A256V2 by Silicon Labs is a telecom IC with 36 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 0.8mm. This rectangular microelectronic assembly is ideal for industrial applications requiring telecom circuit interfaces.
BGM123A256V2R
BGM123A256V2R by Silicon Labs is a telecom IC with 56 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for telecom circuit applications in industrial settings due to its compact square package style and surface mount capability.
BGM113A256V21
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Shape: RECTANGULAR; Length: 15.73 mm;
BGM121A256V2R
BGM121A256V2R by Silicon Labs is a surface mount telecom interface IC with 1 function. It has a square package shape, 56 terminals, and a max seated height of 1.4mm. This industrial-grade IC operates at temperatures ranging from -40 to 85°C and has a nominal voltage of 3.3V.
BGM15MA12E6327XTSA1
Infineon Technologies
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: VQCCN; Package Shape: RECTANGULAR;
BGM121A256V2
Silicon Labs' BGM121A256V2 is a telecom IC with 56 terminals, operating from -40 to 85°C. It has a nominal voltage of 3.3V and is designed for industrial-grade applications. The surface-mountable square package measures 6.5mm x 6.5mm x 1.4mm, making it suitable for compact telecom interface solutions.
BGM15HA12E6327XTSA1
BGM15LA12E6327XTSA1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BUTT; No. of Terminals: 12; Package Code: BCC; Package Shape: RECTANGULAR;
BGM13P22F512GE-V2R
BGM123A256V2
Silicon Labs BGM123A256V2 is a telecom IC with 56 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and MSL level of 3. Suitable for industrial applications, it comes in a square package style measuring 6.5mm x 6.5mm x 1.4mm, making it ideal for surface mount assembly processes up to 260°C peak reflow temperature within 40 seconds.
BGM111A256V1
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 31; Package Shape: RECTANGULAR; Terminal Pitch: 1.2 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved