Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$11.190
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Farnell
1+ parts
$9.770
100+ parts
$6.980
1k+ parts
$6.520
10k+ parts
-
Element14
$12.610
$9.009
$8.409
Nova Conductors
$7.725
Digiode
$8.987
Vyrian
VNN
Netroflash
Advanced Electronics
$7.877
Ampacity Inc.
$8.040
Corphita
$8.514
Continental Prestige Electronics
$11.240
$8.010
Argo Parts USA
Other Function Telecom Interface ICs BGM240SA22VNA2 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
BGM240SA22VNA2 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
1554216004
Molex
WIRE AND CABLE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Infineon Technologies
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
BQ51013BRHLR
Texas Instruments
BQ51013BRHLR by Texas Instruments is a Telecom Interface IC with 20 terminals, operating temperature range of -40 to 125°C, and supply voltage of 5V. It is used in automotive applications for telecom circuits, offering data rate of 0.002 Mbps and MSL level of 2.
ATA5551M-PPMY
Atmel
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: UNSPECIFIED; Package Shape: UNSPECIFIED; Minimum Operating Temperature: -40 Cel; Terminal Position: UNSPECIFIED;
RN4678APL-V/RM100
Microchip Technology's RN4678APL-V/RM100 is a surface mount telecom IC with 33 terminals. Operating temperature range from -20 to 70°C, suitable for commercial applications. Nominal voltage of 1.9V, compact size of 12x22mm makes it ideal for telecom circuit integration.
HT12D(18DIP)
Holtek Semiconductor
HT12D(18DIP) by Holtek Semiconductor is a CMOS telecom IC with 18 terminals. It operates at temperatures from -20°C to 70°C and supports power supplies of 2.4V to 12V. This rectangular, plastic package is ideal for telecom circuit applications.
LBCA2HNZYZ-711
Murata Manufacturing
Murata Manufacturing's LBCA2HNZYZ-711 is a telecom IC with 37 terminals, operating b/w -40°C to 85°C. It has a compact rectangular package measuring 7mm x 7.4mm and a low seated height of 1mm. Ideal for industrial applications requiring a nominal voltage of 2.5V and MSL level of 3.
MGC3130-I/MQ
MGC3130-I/MQ by Microchip is a 28-terminal IC with matte tin finish. Operating b/w -40 to 85 °C, it's ideal for industrial telecom applications. With a nominal voltage of 3.3 V and terminal pitch of 0.5 mm, this chip carrier suits compact designs.
SIM900
Simcom Wireless Solutions
SIM900 by Simcom Wireless Solutions is a telecom IC with 0.0856 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has 68 terminals in a square package. Ideal for telecom applications requiring high-speed data transmission.
RN4020-V/RM
RN4020-V/RM by Microchip Technology is a telecom IC with 24 terminals, operating at 3.3V. It offers a data rate of 1 Mbps and operates b/w -30°C to 85°C. Ideal for applications requiring surface mount technology in compact spaces.
BLUENRG-134
BLUENRG-134 by STMicroelectronics is a telecom IC with 34 terminals in a grid array package. Operating b/w -40°C to 105°C, it has a nominal voltage of 3V. With a very thin profile and fine pitch, it's ideal for industrial telecom applications.
EQCO62T20.3-TRAY
EQCO62T20.3-TRAY by Microchip Technology is a telecom IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a nominal voltage of 1.2V. Ideal for telecom circuit applications, it features a very thin profile and no-lead terminal form for industrial use.
BGSF18DM20E6327XUMA1
Infineon's BGSF18DM20E6327XUMA1 is a 20-terminal IC with CMOS technology, operating b/w -30 to 85°C. Telecom circuit type with 3.5V supply voltage, it's surface-mountable and features gold nickel finish for telecom interface applications.
NINA-B406-00B
U-blox Ag
RS9116W-SB00-B00-B2A
Silicon Labs
SA606DK/01,118
NXP Semiconductors
SA606DK/01,118 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. Operating temperature range from -40 to 85°C, with terminal finish of nickel palladium gold. Ideal for telecom circuits requiring nominal voltage of 3V and industrial temperature grade.
WF111-A-V1-ETSI
ATPL250A-AKU-R
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: LFQFP; Package Shape: SQUARE;
ATWILC1000-MR110UB-T
Microchip Technology's ATWILC1000-MR110UB-T is a telecom IC with 28 terminals, operating at -40 to 85°C. It has a data rate of 72.2 Mbps and operates at 3.3V supply voltage. Ideal for applications requiring high-speed wireless communication in industrial settings.
CC2541F256TRHATQ1
CC2541F256TRHATQ1 by Texas Instruments is a telecom IC with 40 terminals in a square chip carrier package. It operates b/w -40 to 105°C, supporting a data rate of 2 Mbps at 3V supply voltage. Ideal for telecom circuits, it has a compact size of 6x6mm and terminal pitch of 0.5mm for industrial applications.
XB3-24Z8CM-J
Digi International
XB3-24Z8CM-J by Digi International is a telecom IC with 34 terminals, suitable for industrial use. It operates b/w -40°C to 85°C, in a rectangular microelectronic assembly package measuring 13mm x 19mm. This surface-mount IC is ideal for various telecom interface applications.
NRF52833-QIAA-R
Nordic Semiconductor Asa
NRF52833-QIAA-R by Nordic Semiconductor Asa is a telecom IC with 2 Mbps data rate. It operates in industrial temperature range (-40 to 105 °C) and has 73 terminals in a square chip carrier package. Ideal for telecom circuit applications, it is surface mountable and features quad terminal position.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGM220PC22HNA2R
Silicon Labs BGM220PC22HNA2R is a telecom IC with 31 terminals, operating at -40 to 105°C. It has a data rate of 2 Mbps and operates at 3V. This rectangular package is ideal for telecom interface applications.
BGM220SC22HNA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
BGM220SC12WGA2
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
BGM220SC22WGA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
BGM240SA22VNA2R
BGM240PA22VNA3R
BGM210PA22JIA2R
Other Telecom ICs; null: SoC;
BGM240PA22VNA3
BGM240PB32VNA3R
BGM240PB32VNN3
BGM240PB32VNA3
BGM210PA22JIA2
BGM240PA32VNA3
BGM240PA32VNA3R
BGM240PA32VNN3
BGM240PB22VNA3
BGM240SB22VNA2
BGM210PB32JIA2R
BGM210PB32JIA2
BGM240SB22VNA2R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved