Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$11.850
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Farnell
1+ parts
$10.220
100+ parts
$7.300
1k+ parts
$6.820
10k+ parts
-
Newark
$9.020
$8.270
Element14
$17.800
$12.730
$11.880
Nova Conductors
$8.187
Digiode
$9.405
VNN
Vyrian
Netroflash
Ampacity Inc.
$8.420
Corphita
$8.910
Continental Prestige Electronics
$11.760
$8.380
Argo Parts USA
Other Function Telecom Interface ICs BGM240SB22VNA2 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
BGM240SB22VNA2 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
Sangdest Microelectronics (Nanjing)
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
Sensitron Semiconductor
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Semitron
ESP32-D0WD
Espressif Systems (shanghai)
ESP32-D0WD by Espressif Systems is a telecom IC with 38 terminals, operating at -40 to 85°C. It has a data rate of 150 Mbps and operates at 3.3V supply voltage. This surface-mount rectangular package is ideal for automotive applications due to its compact size and high performance capabilities.
NEO-M8U-06B
U-blox Ag
NEO-M8U-06B by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and MSL level of 4, suitable for industrial applications requiring precise positioning and timing. The compact rectangular package measures 12.2mm x 16mm with a low seated height of 2.6mm, making it ideal for surface mount designs in automotive or IoT devices.
BGM123A256V2R
Silicon Labs
BGM123A256V2R by Silicon Labs is a telecom IC with 56 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for telecom circuit applications in industrial settings due to its compact square package style and surface mount capability.
RS9116W-DB00-CC0-B24
ESP32-PICO-D4
Espressif Systems (Shanghai)
ESP32-PICO-D4 by Espressif Systems is a telecom IC with 48 terminals in a square package. Operating from -40 to 85°C, it has a supply voltage of 3.3V. Ideal for industrial applications, this surface-mount IC is designed for telecom circuits with a terminal pitch of 0.5mm.
BT860-SA-T/R
Laird Technologies
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
SX8651IWLTRT
Semtech
Semtech's SX8651IWLTRT is a telecom IC with 12 terminals, operating b/w -40 to 85°C. It has a small outline package style and nominal voltage of 1.8V, suitable for telecom circuit applications. The IC is surface mountable, with a terminal pitch of 0.45mm and moisture sensitivity level of 2.
SIM7600G
Simcom Wireless Solutions
SIM7600G by Simcom Wireless Solutions is a telecom IC with 135 terminals, operating from -40 to 85°C. It supports data rates up to 42 Mbps at a supply voltage of 3.8V. Ideal for industrial applications requiring high-speed cellular connectivity in a compact square package.
RN42-I/RM477
Microchip Technology
RN42-I/RM477 by Microchip Tech is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a data rate of 3 Mbps, nominal voltage of 3.3 V, and terminal pitch of 1 mm. Ideal for industrial applications requiring high-speed data transmission in compact form factors.
AFE031AIRGZT
Texas Instruments
AFE031AIRGZT by Texas Instruments is a 48-terminal telecom IC with a 3.3V supply voltage and low current draw of 0.0053mA. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for telecom circuit applications requiring high reliability and performance in harsh environments. The chip carrier package style with a very thin profile and surface mount capability enhances its versatility for compact designs.
BGM13P22F512GE-V2R
PN5120A0HN1/C1,151
NXP Semiconductors
PN5120A0HN1/C1,151 by NXP Semiconductors is a telecom interface IC with 32 terminals and power supplies of 1.8/3.3V, suitable for telecom circuits. It operates b/w -30 to 85°C, has a terminal pitch of 0.5mm, and features a nickel palladium gold finish for robust connectivity in various applications.
BM70BLES1FC2-0B05BA
BM70BLES1FC2-0B05BA by Microchip Technology is a telecom interface IC with surface mount capability. It operates in an industrial temperature range of -40 to 85 °C and has a data rate of 0.0086 Mbps. This IC is commonly used in telecom circuits for various applications.
NEO-M8N-0
NEO-M8N-0 by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. Its compact rectangular package measures 12.2mm x 16mm, suitable for industrial applications requiring a 3V supply voltage and AEC-Q100 screening level.
CYBT-343026-01
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Shape: RECTANGULAR; Surface Mount: YES;
BQ51013BYFPR
BQ51013BYFPR by Texas Instruments is a RECTANGULAR GRID ARRAY IC with 28 terminals, suitable for AUTOMOTIVE applications. It operates b/w -40 to 125 °C and has a supply voltage of 5V. With a data rate of 0.002 Mbps, it is ideal for TELECOM CIRCUITS requiring fine pitch and very thin profile packaging.
MRF24WG0MB-I/RM
MRF24WG0MB-I/RM by Microchip: Operates at -40 to 85°C, with 3.3V supply voltage. Telecom IC for industrial use, featuring 36 terminals in a rectangular package style. Ideal for applications requiring reliable telecom interface ICs.
CLRC66301HN
CLRC66301HN by NXP Semiconductors is a telecom IC with 32 terminals, operating b/w -25°C to 85°C. It has a nominal voltage of 5V and terminal pitch of 0.5mm. This chip carrier is used in telecom circuits for various applications due to its compact size and surface-mount capability.
AX5243-1-TA05
AX5243-1-TA05 by Onsemi is a telecom IC with CMOS technology, operating b/w -40 to 85°C. It features 20 terminals in a square chip carrier package style, suitable for telecom circuit applications. With a nominal voltage of 3V and terminal pitch of 0.5mm, it offers high performance in industrial temperature grades.
75S10010A200BR
Integrated Device Technology
Other Telecom ICs;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGM220PC22HNA2R
Silicon Labs BGM220PC22HNA2R is a telecom IC with 31 terminals, operating at -40 to 105°C. It has a data rate of 2 Mbps and operates at 3V. This rectangular package is ideal for telecom interface applications.
BGM220SC22HNA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
BGM220SC12WGA2
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
BGM220SC22WGA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
BGM240SA22VNA2
BGM240SA22VNA2R
BGM240PA22VNA3R
BGM210PA22JIA2R
Other Telecom ICs; null: SoC;
BGM240PA22VNA3
BGM240PB32VNA3R
BGM240PB32VNN3
BGM240PB32VNA3
BGM210PA22JIA2
BGM240PA32VNA3
BGM240PA32VNA3R
BGM240PA32VNN3
BGM240PB22VNA3
BGM210PB32JIA2R
BGM210PB32JIA2
BGM240SB22VNA2R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved