Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$9.000
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$8.220
100+ parts
$6.090
1k+ parts
$5.240
10k+ parts
-
Newark
$6.870
$6.020
$5.780
DigiKey
$9.480
$6.966
$6.070
Farnell
$13.471
$8.816
$8.639
Element14
$7.180
$6.920
Nova Conductors
$7.350
Digiode
$11.077
VNN
Vyrian
Aranea Global
$7.203
$6.915
Ampacity Inc.
$7.970
Semicontronic
$7.771
$7.731
AZTECH Wire
$8.590
$8.250
$8.080
$7.920
Corphita
$10.494
Aztec Data Supply Inc.
Argo Parts USA
Corohmni
Continental Prestige Electronics
$7.070
Advanced Electronics
Other Function Telecom Interface ICs BGM240PA22VNA3 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
BGM240PA22VNA3 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Daco Semiconductor
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
ADF7012BRUZ-RL7
Analog Devices
ADF7012BRUZ-RL7 by Analog Devices is a telecom IC with 24 terminals, operating at temperatures from -40 to 85°C. It has a supply voltage of 3V and uses CMOS technology. This surface-mount IC in a small outline package is ideal for telecom circuit applications.
BGM240SA22VNA2R
Silicon Labs
451-00001
Laird Technologies
Laird Technologies' 451-00001 is a telecom IC with 71 terminals, operating at -40 to 85°C. With a supply voltage of 3.3V, it supports data rates up to 2 Mbps. This surface-mount IC in rectangular package is ideal for telecom circuit applications.
SA602AD,602
SA602AD,602 by NXP Semiconductors is an 8-terminal telecom IC with a supply voltage of 6V. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style. Ideal for telecom circuits, it features gull wing terminals and is surface mountable.
AS3933-BQFT
Sciosense Bv
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
ESP32-WROOM-32U(4MB)
Espressif Systems (Shanghai)
ESP32-WROOM-32U(4MB) by Espressif Systems is a telecom IC with 38 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 1.27mm. Ideal for industrial applications requiring compact MICROELECTRONIC ASSEMBLY packages with NO LEAD terminals.
MGM240SD22VNA2
SA636DK/01,118
SA636DK/01,118 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features nickel palladium gold terminal finish and 3V nominal voltage for telecom circuit applications.
BLED112-V1
BLED112-V1 by Silicon Labs is a RECTANGULAR MICROELECTRONIC ASSEMBLY with an operating temperature range of -40 to 85°C. It is an INDUSTRIAL-grade TELECOM CIRCUIT suitable for various telecom interface applications.
BGM121A256V2
Silicon Labs' BGM121A256V2 is a telecom IC with 56 terminals, operating from -40 to 85°C. It has a nominal voltage of 3.3V and is designed for industrial-grade applications. The surface-mountable square package measures 6.5mm x 6.5mm x 1.4mm, making it suitable for compact telecom interface solutions.
SPBTLE-RFTR
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
ODIN-W260-03B
U-blox Ag
TELECOM CIRCUIT; Peak Reflow Temperature (C): 245; Moisture Sensitivity Level (MSL): 4;
ZM5202AE-CME3R
Silicon Labs ZM5202AE-CME3R is a telecom IC with 18 terminals, operating at -10 to 85°C. It has a data rate of 0.1 Mbps and operates at 3.3V nominal voltage. This rectangular package is ideal for telecom interface applications requiring surface mount assembly in microelectronic setups.
453-00005
453-00005 by Laird Technologies is a surface mount telecom IC with 39 terminals. Operating b/w -40 to 85°C, it has a compact rectangular package style measuring 14x10x2.33mm. Ideal for industrial applications requiring a 3V supply voltage and telecom circuit functionality.
EC25EFA-512-STD
Quectel Wireless Solutions
Quectel Wireless Solutions' EC25EFA-512-STD is a telecom IC with 150 Mbps data rate, operating at -40 to 85°C. With 144 terminals in a rectangular package, it's ideal for industrial applications requiring high-speed connectivity in compact spaces.
NEO-M8L-06B
TLK2711AIRCPR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: HVFQFP; Package Shape: SQUARE;
WL1831MODGBMOCT
WL1831MODGBMOCT by Texas Instruments is a telecom IC with 100 terminals in a grid array package. It operates at -20 to 70°C, with a data rate of 100 Mbps and nominal voltage of 3.7V. Ideal for telecom circuits, it features surface mount capability and measures 13.4mm x 13.3mm in size.
NCH-RSL10-101Q48-ABG
NCH-RSL10-101Q48-ABG by Onsemi is a telecom interface IC with 48 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, with matte tin finish and no lead terminal form. It has a data rate of 2 Mbps and nominal voltage of 1.25V, suitable for industrial telecom circuit applications.
WGM160PX22KGA3
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGM220PC22HNA2R
Silicon Labs BGM220PC22HNA2R is a telecom IC with 31 terminals, operating at -40 to 105°C. It has a data rate of 2 Mbps and operates at 3V. This rectangular package is ideal for telecom interface applications.
BGM220SC22HNA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
BGM220SC12WGA2
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
BGM220SC22WGA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
BGM240SA22VNA2
BGM240PA22VNA3R
BGM210PA22JIA2R
Other Telecom ICs; null: SoC;
BGM240PB32VNA3R
BGM240PB32VNN3
BGM240PB32VNA3
BGM210PA22JIA2
BGM240PA32VNA3
BGM240PA32VNA3R
BGM240PA32VNN3
BGM240PB22VNA3
BGM240SB22VNA2
BGM210PB32JIA2R
BGM210PB32JIA2
BGM240PB22VNA3R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved