Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Telecom ICs; null: SoC;
Median Price
$10.630
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$8.600
1k+ parts
$7.130
10k+ parts
-
DigiKey
$8.083
$7.137
Digiode
$10.954
VNN
Component Sense
Vyrian
Nova Conductors
Ampacity Inc.
$6.360
Corphita
$10.377
Corohmni
$15.133
Aztec Data Supply Inc.
$54.562
Argo Parts USA
Aranea Global
Continental Prestige Electronics
$5.520
Other Function Telecom Interface ICs BGM210PB32JIA2 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
uPs/uCs/Peripheral ICs Type:
BGM210PB32JIA2 Telecommunications trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Fairchild Semiconductor
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
BQ51013BYFPR
Texas Instruments
BQ51013BYFPR by Texas Instruments is a RECTANGULAR GRID ARRAY IC with 28 terminals, suitable for AUTOMOTIVE applications. It operates b/w -40 to 125 °C and has a supply voltage of 5V. With a data rate of 0.002 Mbps, it is ideal for TELECOM CIRCUITS requiring fine pitch and very thin profile packaging.
SN65DSI86IPAPQ1
SN65DSI86IPAPQ1 by Texas Instruments is a telecom interface IC with 64 terminals in a square package. It operates b/w -40 to 85°C, with terminal finish of NiPdAu. This IC is suitable for industrial applications requiring a nominal voltage of 1.2V and features gull wing terminal form.
SA612AN,112
NXP Semiconductors
SA612AN,112 by NXP Semiconductors is an 8-terminal telecom interface IC with a rectangular package style. It operates b/w -40 to 85°C and has a nominal voltage of 6V. Ideal for industrial applications requiring reliable telecom circuitry in compact designs.
ATECC508A-SSHDA-T
Atmel
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NRF24L01P-R7
Nordic Semiconductor Asa
NRF24L01P-R7 by Nordic Semiconductor Asa is a 20-terminal IC with 3V supply voltage, operating from -40 to 85°C. It's a telecom circuit type with quad terminals in a square chip carrier package. Ideal for industrial applications requiring low-profile surface-mount components.
SN65DSI83ZQER
SN65DSI83ZQER by Texas Instruments is a telecom interface IC with 64 terminals in a grid array package. It operates b/w -40 to 85°C, has a data rate of 1 Mbps, and requires a nominal voltage of 1.8V. This IC is suitable for industrial applications requiring thin profile and fine pitch components.
SARA-R510S-00B
U-blox Ag
TELECOM CIRCUIT;
RS9116W-SB00-QMS-B2A
Silicon Labs
SIM800F
Simcom Wireless Solutions
SIM800F by Simcom Wireless Solutions is a telecom IC with 0.0856 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has 68 terminals in a square package. Ideal for telecom applications requiring high-speed data transmission in harsh environments.
SPSGRFC-868
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
450-0162C
Laird Technologies
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
RS9116W-SB00-QMS-B24
RN42-I/RM477
Microchip Technology
RN42-I/RM477 by Microchip Tech is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a data rate of 3 Mbps, nominal voltage of 3.3 V, and terminal pitch of 1 mm. Ideal for industrial applications requiring high-speed data transmission in compact form factors.
WL1831MODGBMOCT
WL1831MODGBMOCT by Texas Instruments is a telecom IC with 100 terminals in a grid array package. It operates at -20 to 70°C, with a data rate of 100 Mbps and nominal voltage of 3.7V. Ideal for telecom circuits, it features surface mount capability and measures 13.4mm x 13.3mm in size.
RN41-I/RM477
Microchip Technology's RN41-I/RM477 is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in a rectangular package style. Ideal for industrial applications requiring reliable telecom circuit interfaces.
PEF7072HLV16SLLHN
Intel
The Intel PEF7072HLV16SLLHN is a telecom interface IC with 64 terminals in a rectangular flatpack package. Its gull wing terminal form and quad position make it suitable for telecom circuit applications. This surface-mount device is made of plastic/epoxy, ideal for various telecommunications functions.
ADAR1000ACCZN-R7
Analog Devices
ADAR1000ACCZN-R7 by Analog Devices is a telecom IC with 88 terminals, operating temp range of -40 to 85°C. It has a nominal voltage of 3.3V and negative supply voltage of -5V. Ideal for telecom circuits, this IC comes in a square package style with surface mount feature.
MAX-M8Q-0-10
MAX-M8Q-0-10 by U-blox Ag is an AEC-Q100 certified GNSS Module with 18 terminals, operating from -40 to 85°C. Its compact MICROELECTRONIC ASSEMBLY package makes it ideal for industrial applications requiring precise location tracking in harsh environments.
CC2642R1FRGZT
CC2642R1FRGZT by Texas Instruments is a telecom IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3V. This surface-mount IC is ideal for industrial applications requiring very thin profile components.
ADRF5044BCCZN
Analog Devices' ADRF5044BCCZN is a 24-terminal SQUARE IC with -40 to 85°C temp range. Ideal for TELECOM CIRCUITS, it operates at 3.3V, has a 0.5mm terminal pitch, and MSL of 3.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGM220PC22HNA2R
Silicon Labs BGM220PC22HNA2R is a telecom IC with 31 terminals, operating at -40 to 105°C. It has a data rate of 2 Mbps and operates at 3V. This rectangular package is ideal for telecom interface applications.
BGM220SC22HNA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
BGM220SC12WGA2
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
BGM220SC22WGA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
BGM240SA22VNA2
BGM240SA22VNA2R
BGM240PA22VNA3R
BGM210PA22JIA2R
BGM240PA22VNA3
BGM240PB32VNA3R
BGM240PB32VNN3
BGM240PB32VNA3
BGM210PA22JIA2
BGM240PA32VNA3
BGM240PA32VNA3R
BGM240PA32VNN3
BGM240PB22VNA3
BGM240SB22VNA2
BGM210PB32JIA2R
BGM210LA22JIF2R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved