Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$8.490
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
$8.110
100+ parts
$6.143
1k+ parts
$5.414
10k+ parts
-
Element14
$8.170
Mouser Electronics
$6.550
$5.340
Farnell
$10.430
$7.230
$7.090
Newark
$13.300
$10.480
$9.430
Nova Conductors
$8.260
Digiode
$9.908
Vyrian
VNN
Aranea Global
$8.095
$7.771
Ampacity Inc.
$8.870
Corphita
$9.387
Continental Prestige Electronics
$10.750
$7.320
Advanced Electronics
Argo Parts USA
Aztec Data Supply Inc.
Corohmni
Other Function Telecom Interface ICs BGM240PB32VNA3 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
BGM240PB32VNA3 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Rectron
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Secos
Diodes Incorporated
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Philips Components
RN41-I/RM615
Microchip Technology
Microchip Technology's RN41-I/RM615 is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and matte tin finish, suitable for industrial applications. This surface-mount IC in rectangular package measures 13.2mm x 25.8mm with a seated height of 2.2mm, ideal for telecom interface functions.
14450R-500
Echelon
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE;
SPSGRF-868
SPSGRF-868 by STMicroelectronics is a telecom IC with 11 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 1.27mm, suitable for industrial applications requiring compact MICROELECTRONIC ASSEMBLY packages in surface mount form.
CC1125RHBT
CC1125RHBT by Texas Instruments is a telecom IC with 32 terminals, operating at 3V. It has a data rate of 0.2 Mbps and can withstand temperatures from -40 to 85°C. This chip carrier package is ideal for industrial telecom applications requiring a compact design and surface mount capability.
BGSF110GN26E6327XTSA1
Infineon Technologies
BGSF110GN26E6327XTSA1 by Infineon is a Telecom IC with 26 terminals in a rectangular chip carrier package. Operating temperature range from -30 to 85°C, suitable for telecom circuits. Utilizes CMOS technology with a nominal voltage of 3V, ideal for surface mount applications.
MFRC63002HN,151
NXP Semiconductors
NXP Semiconductors' MFRC63002HN,151 is a telecom IC with 32 terminals in a square chip carrier package. Operating b/w -25 to 85°C, it has a nominal voltage of 5V and terminal pitch of 0.5mm. Ideal for telecom circuits, this IC is surface mountable and features a max seated height of 1mm.
DA14531-00000FX2
Dialog Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: BCC; Package Shape: RECTANGULAR;
CC1175RHBT
The Texas Instruments CC1175RHBT is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and data rate of 0.2 Mbps. This chip carrier package is suitable for industrial applications requiring a compact design and surface mount capability.
XB3-24ARM
Digi International
The Digi International XB3-24ARM is a TELECOM CIRCUIT with 1 Mbps Data Rate. It operates b/w -40°C to 85°C, making it suitable for various telecom applications. The RECTANGULAR package style and SPECIAL SHAPE design enhance its performance in Other Function Telecom Interface ICs.
SX1272IMLTRT
Semtech
Semtech's SX1272IMLTRT is a telecom IC with 28 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3.3V. Ideal for industrial applications requiring very thin profile components and matte tin terminal finish.
WL1835MODGBMOCT
Texas Instruments' WL1835MODGBMOCT is a telecom IC with 100 terminals, operating at 3.7V and supporting data rates up to 100 Mbps. It features a rectangular package style, surface mount capability, and operates within -20 to 70°C temperature range. Ideal for telecom interface applications requiring high-speed data transmission in commercial-grade environments.
LBEE5KL1DX-883
Murata Manufacturing
Murata Manufacturing's LBEE5KL1DX-883 is a RECTANGULAR MICROELECTRONIC ASSEMBLY with 46 terminals. Operating from -30 to 70°C, it has a seated height of 1.1mm and nominal voltage of 3.6V. Ideal for TELECOM CIRCUITS, this Telecom Interface IC is surface mountable and suited for various telecom applications.
ADRF5044BCCZN-R7
Analog Devices
Analog Devices' ADRF5044BCCZN-R7 is a 24-terminal SQUARE package IC with -40 to 85 °C operating temp. Ideal for TELECOM CIRCUIT applications, it has a 3.3 V nominal voltage and 0.5 mm terminal pitch. With NICKEL PALLADIUM GOLD finish, it suits INDUSTRIAL-grade telecom interfaces.
CL4490-1000-232-SP
Laird Technologies
RF AND BASEBAND CIRCUIT;
MAX7044AKA-T
Maxim Integrated
MAX7044AKA-T by Maxim Integrated is a telecom IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage of 2.7V and low power consumption of 0.0257mA, suitable for automotive applications due to its CMOS technology and small form factor.
ODIN-W260-04B-00
U-blox Ag
Other Telecom ICs; Moisture Sensitivity Level (MSL): 4;
ZED-F9P-01B
ZED-F9P-01B by U-blox Ag is a GNSS Module with 54 terminals, operating temperature range of -40 to 85°C. It is surface mountable and suitable for industrial applications requiring precise positioning and timing accuracy.
PE4312C-Z
Psemi
PE4312C-Z by Psemi is a 20-terminal IC with -55 to 105°C operating temp range. It features CMOS tech, -3.3V negative supply, and 3.3V nominal voltage. Ideal for telecom circuits, it's a square chip carrier with nickel palladium gold finish and quad terminal position.
MGM240PA22VNA3R
Silicon Labs
BGM113A256V2
BGM113A256V2 by Silicon Labs is a telecom IC with 36 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 0.8mm. This rectangular microelectronic assembly is ideal for industrial applications requiring telecom circuit interfaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGM220PC22HNA2R
Silicon Labs BGM220PC22HNA2R is a telecom IC with 31 terminals, operating at -40 to 105°C. It has a data rate of 2 Mbps and operates at 3V. This rectangular package is ideal for telecom interface applications.
BGM220SC22HNA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
BGM220SC12WGA2
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
BGM220SC22WGA2
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
BGM240SA22VNA2
BGM240SA22VNA2R
BGM240PA22VNA3R
BGM210PA22JIA2R
Other Telecom ICs; null: SoC;
BGM240PA22VNA3
BGM240PB32VNA3R
BGM240PB32VNN3
BGM210PA22JIA2
BGM240PA32VNA3
BGM240PA32VNA3R
BGM240PA32VNN3
BGM240PB22VNA3
BGM240SB22VNA2
BGM210PB32JIA2R
BGM210PB32JIA2
BGM240PB22VNA3R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved