Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
Median Price
$3.180
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$2.180
100+ parts
$1.420
1k+ parts
$1.210
10k+ parts
-
Newark
$2.980
$2.250
$1.990
Mouser Electronics
$2.110
$1.870
$1.840
DigiKey
$3.320
$2.401
$2.150
$1.885
Element14
$4.190
$3.170
$2.510
Adafruit Industries
$15.043
$14.291
RS (Exports)
$2.364
Digiode
$2.071
Nova Conductors
$2.300
Vyrian
Semicontronic
$1.850
$1.804
$1.794
Ampacity Inc.
Corphita
$1.962
Argo Parts USA
Bastille Electronics
$2.185
$2.076
$2.047
Component Stockers USA
$2.080
$1.570
Continental Prestige Electronics
$4.120
$2.450
$1.810
Aztec Data Supply Inc.
$10.691
Corohmni
$13.024
Advanced Electronics
Robosynatics
$44.783
Lucentia Tech
Other Function Telecom Interface ICs EFR32BG22C224F512GN32-C attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Telecom IC Type:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
EFR32BG22C224F512GN32-C Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - EFR32MG22, BG22, FG22 27/Oct/2020 EFR32xG2x/BGx2x0Px/MGM2x0Px 13/Jul/2022
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
M24308/2-1F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Meritek Electronics
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Bkc Semiconductors
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
A1101R04C00GM
Ttm Technologies
TELECOM CIRCUIT;
XB3-24Z8US
Digi International
The Digi International XB3-24Z8US is a telecom IC with 37 terminals, suitable for industrial applications. It operates b/w -40°C to 85°C, making it ideal for harsh environments. This surface-mount IC comes in a rectangular package style and is designed for other telecom interface functions.
RN41SM-I/RM
Microchip Technology
Microchip Technology's RN41SM-I/RM is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and gold over nickel terminal finish. This rectangular package is ideal for industrial applications requiring reliable telecom circuit interfaces.
MAX-M8Q-0-10
U-blox Ag
MAX-M8Q-0-10 by U-blox Ag is an AEC-Q100 certified GNSS Module with 18 terminals, operating from -40 to 85°C. Its compact MICROELECTRONIC ASSEMBLY package makes it ideal for industrial applications requiring precise location tracking in harsh environments.
EFR32BG22C222F352GM32-C
Silicon Labs
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2;
SL3S4011FHK,125
NXP Semiconductors
SL3S4011FHK,125 by NXP Semiconductors is a telecom interface IC with 8 terminals in a square chip carrier package. Operating at -40 to 85°C, it supports power supplies of 1.8/3.6V for industrial applications. This surface-mount IC has a terminal pitch of 0.5mm and is ideal for telecom circuit integration.
ODIN-W260-05B-00
Other Telecom ICs; Moisture Sensitivity Level (MSL): 4;
DA14682-00F08A92
Dialog Semiconductor
Other Telecom ICs; Peak Reflow Temperature (C): 255; Moisture Sensitivity Level (MSL): 3;
A1101R09C00GM
ISO508P
Burr-Brown Corporation
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
AP22804AW5-7
Diodes Inc.'s AP22804AW5-7 is a telecom IC with 5 terminals, operating from -40 to 85°C. Its small outline package is ideal for telecom circuits, featuring matte tin finish and gull wing terminals. With a nominal 5V supply voltage, it's suitable for industrial applications requiring compact design and high temperature tolerance.
TUSB211IRWBR
TUSB211IRWBR by Texas Instruments is a telecom IC with 480.24 Mbps data rate, operating at -40 to 85 °C. It features a 12-terminal chip carrier package suitable for industrial applications requiring a 3.3 V supply voltage and low current consumption of 0.02 mA.
MRF24WB0MA/RM
MRF24WB0MA/RM by Microchip: 3.3V supply, 36 terminals, telecom IC for commercial use. Rectangular package, surface mountable. Ideal for telecom circuit applications in temperatures from 0 to 70°C.
MGM12P02F1024GA-V2
AT86RF215M-ZU
Atmel
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: VQCCN; Package Shape: SQUARE;
ST60-SIPT
Laird Technologies
ST60-SIPT by Laird Technologies is a surface mount telecom IC with 84 terminals. Operating temp range: -30 to 85°C. Data rate: 866.7 Mbps, suitable for telecom circuit applications due to its compact rectangular package style and low nominal voltage of 3.3V.
ADF7012BRUZ-RL7
Analog Devices
ADF7012BRUZ-RL7 by Analog Devices is a telecom IC with 24 terminals, operating at temperatures from -40 to 85°C. It has a supply voltage of 3V and uses CMOS technology. This surface-mount IC in a small outline package is ideal for telecom circuit applications.
USB3740B-AI9TR
Standard Microsystems
USB3740B-AI9TR by Standard Microsystems is a telecom IC with 10 terminals, operating b/w -40 to 85°C. It has a thin profile chip carrier package style, suitable for industrial applications at 5V supply voltage. With surface mount and quad terminal position, it's ideal for compact telecom circuit designs.
SPIRIT1QTR
RF AND BASEBAND CIRCUIT; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3;
CC1200RHBT
The Texas Instruments CC1200RHBT is a telecom IC with 32 terminals, operating at 3V. It offers a data rate of 1.25 Mbps and can withstand temperatures from -40 to 85°C. Ideal for telecom circuits, this chip carrier package has a very thin profile and is surface mountable.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EFR32BG22C224F512IM40-C
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
EFR32BG22C224F512GM40-C
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 2; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
EFR32BG22C222F352GM40-C
TELECOM CIRCUIT; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
EFR32BG22C224F512GM32-C
TELECOM CIRCUIT; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
EFR32BG22C224F512IM32-C
EFR32BG22C222F352GN32-C
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e4;
EFR32BG13P632F512GM48-B
EFR32BG13P732F512GM48-B
EFR32BG12P432F1024GM48-B
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
EFR32BG1P332F256GJ43-C0
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 43; Package Code: VFBGA; Package Shape: RECTANGULAR;
EFR32BG21A010F1024IM32-B
TELECOM CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
EFR32BG1V132F256GJ43-C0
EFR32BG13P532F512GM48-B
EFR32BG21A010F512IM32-B
EFR32BG21A010F512IM32-B by Silicon Labs is a Telecom IC with 2 Mbps data rate, operating at -40 to 125 °C. It features a square shape, 32 terminals, and automotive temperature grade. Ideal for telecom applications requiring low power consumption and high-speed data transmission.
EFR32BG12P432F1024GL125-B
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
EFR32BG13P732F512GM32-D
EFR32BG13P732F512GM32-D by Silicon Labs is a telecom IC with 48 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and MSL level of 3, suitable for industrial applications requiring a compact chip carrier package with very thin profile and no-lead terminal form.
EFR32BG13P732F512GM48-D
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
EFR32BG1B232F256GJ43-C0
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved