Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 2; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
Median Price
$2.838
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Newark
1+ parts
$1.330
100+ parts
1k+ parts
10k+ parts
-
Arrow
$2.095
Mouser Electronics
$2.660
$2.180
$1.860
$1.820
Element14
$2.057
$1.659
Farnell
$3.162
$2.036
$1.581
DigiKey
$3.320
$2.401
$2.077
$2.027
Chip1Stop
$3.420
Verical
Nova Conductors
$2.230
Digiode
$2.464
Vyrian
Ampacity Inc.
$1.840
Continental Prestige Electronics
$2.030
$1.490
Aranea Global
$2.185
$2.098
Argo Parts USA
Corphita
$2.335
Semicontronic
$4.010
$3.910
$3.890
Aztec Data Supply Inc.
$9.180
Advanced Electronics
$16.162
$15.354
Corohmni
$16.640
Futuretech Components
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Robosynatics
$13.654
Lucentia Tech
Other Function Telecom Interface ICs EFR32BG22C224F512GM40-C attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Telecom IC Type:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
EFR32BG22C224F512GM40-C Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - EFR32MG22, BG22, FG22 27/Oct/2020 EFR32xG2x/BGx2x0Px/MGM2x0Px 13/Jul/2022
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Crimson Semiconductor
New Jersey Semiconductor Products
Infinex
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MAX7044AKA+T
Maxim Integrated
TELECOM CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSSOP; Package Shape: RECTANGULAR;
LBEE5HY1MW-230
Murata Manufacturing
Murata Manufacturing's LBEE5HY1MW-230 is a telecom IC with 72 terminals, operating at -30 to 85°C. With a compact size of 7.9mm x 7.3mm x 1.1mm, it has a supply voltage of 3.3V and peak reflow temp of 250°C. Ideal for telecom applications due to its no-lead terminal form and MSL level of 3.
453-00005
Laird Technologies
453-00005 by Laird Technologies is a surface mount telecom IC with 39 terminals. Operating b/w -40 to 85°C, it has a compact rectangular package style measuring 14x10x2.33mm. Ideal for industrial applications requiring a 3V supply voltage and telecom circuit functionality.
RN4871U-V/RM118
Microchip Technology
RN4871U-V/RM118 by Microchip Technology is a surface mount telecom interface IC with 16 terminals. It operates at temperatures ranging from -20 to 70 °C and has a max data rate of 0.01 Mbps. This IC is commonly used in telecom circuits for various applications.
HTRC11001T/02EE
NXP Semiconductors
NXP Semiconductors' HTRC11001T/02EE is a telecom interface IC with 14 terminals, operating at 5V. It features a small outline package style, industrial temperature grade, and nickel palladium gold terminal finish. Ideal for telecom circuits, this IC has a max seated height of 1.75mm and operates b/w -40 to 85°C.
BGS12PN10E6327XTSA1
Infineon Technologies
BGS12PN10E6327XTSA1 by Infineon is a Telecom IC with CMOS technology, operating b/w -30°C to 85°C. It features a 10-terminal chip carrier package with very thin profile, suitable for telecom circuit applications. With a nominal voltage of 2.85V and compact dimensions of 1.5mm x 1.1mm, it's ideal for space-constrained designs requiring surface mount compatibility.
88E6176-A1-TFJ2I000
Marvell Technology
Marvell Technology's 88E6176-A1-TFJ2I000 is a telecom circuit IC with 128 terminals in a square flatpack package. It features gull wing terminal form and quad terminal position, suitable for surface mount applications. Ideal for various functions in telecommunications interfaces.
ZED-F9P-00B
U-blox Ag
ZED-F9P-00B by U-blox Ag is a 54-terminal IC with AEC-Q100 screening, operating from -40 to 85°C. It features a 3V supply voltage, telecom circuit type, and compact rectangular package. Ideal for telecom interfaces in industrial applications due to its small size and wide temperature range.
LBCA2HNZYZ-711
Murata Manufacturing's LBCA2HNZYZ-711 is a telecom IC with 37 terminals, operating b/w -40°C to 85°C. It has a compact rectangular package measuring 7mm x 7.4mm and a low seated height of 1mm. Ideal for industrial applications requiring a nominal voltage of 2.5V and MSL level of 3.
75S10010A200BR
Renesas Electronics
Other Telecom ICs;
BMD-340-A-R-10
BMD-340-A-R-10 by U-blox Ag is a surface mount telecom IC with 68 terminals. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of 3V. With a data rate of 2 Mbps, it is ideal for high-speed telecommunications applications.
BGB707L7ESDE6327XTSA1
BGB707L7ESDE6327XTSA1 by Infineon is a telecom IC with 3V supply voltage. It features a small outline package with 7 terminals, gold palladium finish, and dual terminal position. Ideal for telecom circuit applications due to its AEC-Q101 screening level and very thin profile design.
RN41-I/RM615
Microchip Technology's RN41-I/RM615 is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and matte tin finish, suitable for industrial applications. This surface-mount IC in rectangular package measures 13.2mm x 25.8mm with a seated height of 2.2mm, ideal for telecom interface functions.
MGM240PA32VNN3
Silicon Labs
TELECOM CIRCUIT;
RS9116W-SB00-QMS-B2A
BLUENRG-248
STMicroelectronics
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3;
FUSB340TMX
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 18; Package Code: HVQCCN; Package Shape: RECTANGULAR;
SX1262IMLTRT
Semtech
RF AND BASEBAND CIRCUIT; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
ESP32-D2WD
Espressif Systems (Shanghai)
ESP32-D2WD by Espressif Systems is a 48-terminal IC with CMOS technology. Operating from -40 to 105°C, it has a supply voltage of 3.3V. Ideal for telecom circuits, this chip carrier is surface-mountable and features a very thin profile for industrial applications.
WL1807MODGIMOCT
Texas Instruments
WL1807MODGIMOCT by Texas Instruments is a telecom interface IC with 100 terminals in a rectangular grid array package. Operating at -40 to 85°C, it has a nominal voltage of 3.7V and supports data rates up to 100 Mbps. Ideal for industrial applications requiring high-speed telecommunications functionality.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EFR32BG22C224F512IM40-C
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
EFR32BG22C222F352GM40-C
TELECOM CIRCUIT; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
EFR32BG22C224F512GM32-C
TELECOM CIRCUIT; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
EFR32BG22C224F512IM32-C
EFR32BG22C222F352GM32-C
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2;
EFR32BG22C224F512GN32-C
TELECOM CIRCUIT; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
EFR32BG22C222F352GN32-C
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e4;
EFR32BG13P632F512GM48-B
EFR32BG13P732F512GM48-B
EFR32BG12P432F1024GM48-B
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
EFR32BG1P332F256GJ43-C0
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 43; Package Code: VFBGA; Package Shape: RECTANGULAR;
EFR32BG21A010F1024IM32-B
TELECOM CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
EFR32BG1V132F256GJ43-C0
EFR32BG13P532F512GM48-B
EFR32BG21A010F512IM32-B
EFR32BG21A010F512IM32-B by Silicon Labs is a Telecom IC with 2 Mbps data rate, operating at -40 to 125 °C. It features a square shape, 32 terminals, and automotive temperature grade. Ideal for telecom applications requiring low power consumption and high-speed data transmission.
EFR32BG12P432F1024GL125-B
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
EFR32BG13P732F512GM32-D
EFR32BG13P732F512GM32-D by Silicon Labs is a telecom IC with 48 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and MSL level of 3, suitable for industrial applications requiring a compact chip carrier package with very thin profile and no-lead terminal form.
EFR32BG13P732F512GM48-D
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
EFR32BG1B232F256GJ43-C0
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved