Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLR9118A by Onsemi is an Infrared LED with 0.1A forward current, 945nm peak wavelength, and 50° viewing angle. Ideal for applications requiring IR illumination in a temperature range of -25 °C to 80°C. Through hole mount feature makes it easy to install in various devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kepictronics
SupplyDigital Components
Problanco Electronics
TANS Electronics
Kulean Microsystems
UHIMA Technologies
Corohmni
Corphita
The low forward current allows for efficient power usage and longer lifespan of the infrared LEDs.
The peak wavelength of 945nm ensures strong and consistent infrared emission for reliable performance.
The wide operating temperature range of -25 to 80 °C allows for versatility in various environments.
The minimum operating temperature of -25 °C ensures the infrared LEDs can function in cold conditions without performance issues.
The maximum reverse voltage of 5V provides protection against potential voltage spikes and electrical damage.
The wide 50° viewing angle ensures a larger coverage area for the emitted infrared light.
The through-hole mounting feature allows for easy installation and secure placement of the infrared LEDs in various applications.
Infrared LEDs SLR9118A attributes and parameters. Explore more Infrared LEDs devices from Onsemi
Maximum Forward Current:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Sub-Category:
Viewing Angle:
SLR9118A Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Swampscott Electronics
Tesla Elektronicke Soucastky
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200168
Molex
WIRE AND CABLE;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OP297A
Optek Technology
INFRARED LED; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .0000005 s; Viewing Angle: 20 deg; Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 890;
TLN208
Toshiba
INFRARED LED; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; No. of Functions: 1; Configuration: SINGLE; Minimum Operating Temperature: -25 Cel;
TIL49
Texas Instruments
INFRARED LED; Maximum Forward Voltage: 1.6 V; No. of LEDs in Array: 9; Color At Wavelength: INFRARED; Peak Wavelength (nm): 940;
HSDL-4420#031
Hewlett Packard
INFRARED LED; Size: 1.78 mm; Configuration: SINGLE; Shape: ROUND; Minimum Operating Temperature: -40 Cel; Nominal Output Power: 30 W;
ASDL-4264-C22
Broadcom
INFRARED LED; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .15 A; No. of Functions: 1; Minimum Operating Temperature: -40 Cel; Shape: ROUND;
SFH481
Infineon Technologies
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .2 A; Semiconductor Material: GaAlAs; Maximum Operating Temperature: 100 Cel;
SFH407-2
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 900; JESD-609 Code: e0; Maximum Response Time: .00000005 s;
TSSF4500
Vishay Intertechnology
Vishay Intertechnology's TSSF4500 is a 3.5mm INFRARED LED with peak wavelength of 870nm and max forward current of 0.1A. Ideal for applications requiring high output power up to 35W, operating in temperatures ranging from -40°C to 100°C.
TLN119-B
INFRARED LED; Nominal Output Power: 4.5 W; No. of Functions: 1; Configuration: SINGLE; Minimum Operating Temperature: -25 Cel; Shape: ROUND;
TLN211
INFRARED LED; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Maximum Forward Current: .05 A; Configuration: SINGLE; Nominal Output Power: 12 W;
SFH4850E7800
Osram Opto Semiconductors
Osram Opto Semiconductors SFH4850E7800 is a 4.2mm IR LED with peak wavelength of 850nm, max forward current of 0.2A, and viewing angle of 46°. Ideal for applications requiring high power output in a compact size, such as security cameras and proximity sensors.
ARE1-8930-00000
INFRARED LED; Mounting Feature: SURFACE MOUNT; Viewing Angle: 90 deg; Maximum Forward Voltage: 3.6 V; Shape: ROUND; Configuration: SINGLE WITH BUILT-IN ESD PROTECTION DEVICE;
SE5470-003
Honeywell Sensing And Control
SE5470-003 by Honeywell Sensing And Control is an INFRARED LED with peak wavelength of 880nm, forward current of 0.1A, and viewing angle of 20°. Ideal for applications requiring quick response time, it operates b/w -55°C to 125°C temperatures and has a max forward voltage of 1.9V.
Broadcom's HSDL-4420#031 is a single infrared LED with peak wavelength of 875nm. It has a max forward current of 0.1A and nominal output power of 30W. Ideal for applications requiring IR illumination in temperatures ranging from -40°C to 85°C.
TSHA4401
Telefunken Microelectronics
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Semiconductor Material: GaAlAs; Maximum Response Time: .0000005 s;
SFH431-2
INFRARED LED; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Semiconductor Material: GaAs; JESD-609 Code: e0; Maximum Forward Current: .3 A;
LD261
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Viewing Angle: 58 deg; Minimum Operating Temperature: -40 Cel; Semiconductor Material: GaAs; Maximum Forward Current: .06 A;
TLN117(B,F)
INFRARED LED; Shape: ROUND; Nominal Output Power: 2.5 W; Minimum Operating Temperature: -25 Cel; Configuration: SINGLE; Additional Features: SIDE VIEW;
SLR981A7
SLR981A7 by Onsemi is an Infrared LED with peak wavelength of 945nm, forward current of 0.1A, and viewing angle of 30°. Ideal for applications requiring fast response time (0.000001s) in temperature range from -25 °C to 80°C.
VSLB3940-QS21
Vishay Intertechnology's VSLB3940-QS21 is a 3mm INFRARED LED with peak wavelength of 940nm. It has max forward current of 0.1A and viewing angle of 44°. Ideal for applications requiring high output power in infrared illumination systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLR938AV8
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -25 Cel; Maximum Reverse Voltage: 5 V; Maximum Operating Temperature: 80 Cel; Peak Wavelength (nm): 945;
SLR932AV
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Viewing Angle: 60 deg; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .1 A; Maximum Reverse Voltage: 5 V;
SLR931A8
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Reverse Voltage: 5 V; Maximum Forward Current: .1 A; Minimum Operating Temperature: -25 Cel; Peak Wavelength (nm): 945;
SLR935A8
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Reverse Voltage: 5 V; Viewing Angle: 20 deg; Peak Wavelength (nm): 945; Maximum Operating Temperature: 80 Cel;
SLR932AV8
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Viewing Angle: 60 deg; Maximum Operating Temperature: 80 Cel; Maximum Forward Current: .1 A; Maximum Reverse Voltage: 5 V;
SLR932A7
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .1 A; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 80 Cel; Viewing Angle: 25 deg;
SLR938C
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Voltage: 1.5 V; Maximum Response Time: .000001 s; Spectral Bandwidth: 45 m; Maximum Operating Temperature: 80 Cel;
SLR903C
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Voltage: 1.4 V; Peak Wavelength (nm): 945; Minimum Operating Temperature: -25 Cel; Maximum Response Time: .000001 s;
SLR932AV7
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -25 Cel; Viewing Angle: 60 deg; Peak Wavelength (nm): 945; Maximum Operating Temperature: 80 Cel;
SLR931AV
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .1 A; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -25 Cel; Maximum Reverse Voltage: 5 V;
SLR935A7
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .000001 s; Semiconductor Material: GaAs; Maximum Forward Voltage: 1.5 V; Maximum Operating Temperature: 80 Cel;
SLR932C20
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 945; Maximum Reverse Voltage: 5 V; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .1 A;
SLR932A
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .1 A; Maximum Reverse Voltage: 5 V; Peak Wavelength (nm): 945;
SLR938A8
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 945; Maximum Operating Temperature: 80 Cel; Maximum Reverse Voltage: 5 V; Maximum Forward Current: .1 A;
SLR931A
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Reverse Voltage: 5 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 945;
SLR932A8
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -25 Cel; Viewing Angle: 28 deg; Maximum Operating Temperature: 80 Cel; Peak Wavelength (nm): 945;
SLR902A
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .05 A; Peak Wavelength (nm): 945; Maximum Reverse Voltage: 5 V; Viewing Angle: 70 deg;
SLR931AV8
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Reverse Voltage: 5 V; Peak Wavelength (nm): 945; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -25 Cel;
SLR935A
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Reverse Voltage: 5 V; Minimum Operating Temperature: -25 Cel; Peak Wavelength (nm): 945; Maximum Operating Temperature: 80 Cel;
SLR9118A
Sanyo Electric
Infrared LEDs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .1 A; Peak Wavelength (nm): 945; Maximum Reverse Voltage: 5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved