Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTD60N03 by Onsemi is a Power FET with N-CHANNEL polarity, suitable for SWITCHING applications. It features a Max Drain Current of 60A, Max Pulsed Drain Current of 120A, and Min DS Breakdown Voltage of 28V. This transistor operates in ENHANCEMENT MODE and has a max power dissipation of 75W.
Median Price
$0.242
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.251
1k+ parts
$0.208
10k+ parts
$0.186
DigiKey
$0.310
Farnell
$0.163
Verical
$0.232
Vyrian
Digiode
$0.196
Corohmni
Corphita
$0.185
Metaverse IC Inc.
Kulean Microsystems
TANS Electronics
Continental Prestige Electronics
A-Z Elektronik GmbH
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
Kepictronics
SupplyDigital Components
UHIMA Technologies
Durable and lightweight material, ideal for electronic components to ensure longevity and portability.
N-channel FETs are commonly used for high power applications due to their lower ON resistance and higher switching speeds.
Designed specifically for switching applications, ensuring efficient and reliable operation.
Allows for safe operation within specified voltage range, protecting the transistor from damage.
Capable of handling high current loads, making it suitable for power applications.
Ability to dissipate heat efficiently, allowing for continuous operation under high power conditions.
Can operate at high temperatures without degradation, suitable for demanding environments.
Low ON resistance leads to reduced power loss and improved efficiency in circuit applications.
Power Field Effect Transistors (FET) NTD60N03 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
NTD60N03 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
IRFP460LCPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Package Body Material: PLASTIC/EPOXY; Transistor Element Material: SILICON;
FDB3632-F085
FDB3632-F085 by Onsemi is a power field effect transistor (FET) with a min DS breakdown voltage of 100V. It is an N-channel transistor with a max drain current of 12A and a max power dissipation of 310W. This transistor is commonly used for switching applications in various industries.
IRLML2244TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Operating Mode: ENHANCEMENT MODE; Package Style (Meter): SMALL OUTLINE;
FDPF10N60NZ
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 38 W; Maximum Operating Temperature: 150 Cel; Terminal Position: SINGLE;
AUIRF540Z
AUIRF540Z by Infineon Technologies is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for switching applications. It features 140A max pulsed drain current and 0.0265 ohm max drain-source resistance. Operating in enhancement mode, it has a 175°C max temp rating and 92W power dissipation capability.
IRLML6402TR
IRLML6402TR by International Rectifier is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 22A IDM and 0.065 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 150°C. This surface-mount transistor has a built-in diode, making it suitable for various power management tasks.
IRF5305PBF
IRF5305PBF by Infineon is a P-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 110A IDM and 0.06 ohm RDS(ON), suitable for high-power circuits. With a max power dissipation of 110W and operating temperature up to 175°C, it ensures reliable performance in various environments.
FDS8984
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Avalanche Energy Rating (EAS): 32 mJ; Package Shape: RECTANGULAR;
DMPH3010LK3-13
Power Field-Effect Transistors; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
DMP3099L-7
DMP3099L-7 by Diodes Inc. is a P-channel FET with 30V DS breakdown voltage and 3.8A max drain current, ideal for switching applications. It features a built-in diode, operates in enhancement mode, and has a low on-resistance of 0.065 ohm. Suitable for surface mount designs with small outline package style.
NDT3055L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY;
IRFZ44NSTRL
IRFZ44NSTRL by International Rectifier is a power FET with N-channel polarity. It has a min DS breakdown voltage of 55V and can handle a max pulsed drain current of 160A. This transistor is commonly used for switching applications.
NTBG020N120SC1
NTBG020N120SC1 by Onsemi is a N-CHANNEL FET with 1200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max Drain Current of 98A, Avalanche Energy Rating of 264mJ, and Operating Temperature up to 175°C. This SINGLE configuration transistor has GULL WING terminals and METAL-OXIDE SEMICONDUCTOR technology in a RECTANGULAR package.
IRF7303TRPBF
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Operating Mode: ENHANCEMENT MODE;
IRFP450PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 180 W; JESD-609 Code: e3; Avalanche Energy Rating (EAS): 760 mJ;
ZXMP6A13GTA
ZXMP6A13GTA by Diodes Inc. is a P-CHANNEL power FET with a min DS breakdown voltage of 60V. It is used for switching applications and has a max drain current of 2.3A.
SQJ479EP-T1_GE3
Vishay Intertechnology
Vishay Intertechnology's SQJ479EP-T1_GE3 is a P-CHANNEL FET with 80V DS Breakdown Voltage, 100A IDM, and 0.033 ohm RDS(ON). Ideal for power management applications in automotive electronics due to AEC-Q101 standard compliance.
IRFP4468PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 520 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
SCT3080KLGC11
ROHM
ROHM's SCT3080KLGC11 is a N-CHANNEL FET with 1200V DS breakdown voltage and 77A IDM. Ideal for switching applications, it features a single configuration with built-in diode and 0.104 ohm max drain-source resistance.
MCH3406-TL-E
MCH3406-TL-E by Onsemi is a N-CHANNEL FET with 3A max drain current and 1W max power dissipation. Ideal for applications requiring high efficiency in a single configuration, such as power management systems. Operating in enhancement mode, it can handle up to 150°C temperature with surface mount capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTD6414ANT4G
NTD6414ANT4G by Onsemi is an N-CHANNEL FET with 100V DS Breakdown Voltage, 117A IDM, and 0.037 ohm RDS(on). It is used in power applications requiring high drain current handling and low on-resistance.
NTD6415ANLT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 83 W; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
NTD6416ANLT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 71 W; Package Shape: RECTANGULAR; Maximum Drain Current (Abs) (ID): 19 A;
NTD6416ANT4G
NTD6416ANT4G by Onsemi is a Power FET with 100V DS Breakdown Voltage, 62A IDM, and 0.081 ohm RDS(on). It's an N-CHANNEL transistor in PLASTIC/EPOXY package ideal for power applications. Operating in ENHANCEMENT MODE, it has a max power dissipation of 71W at 175°C.
NTD60N02R-35G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Body Material: PLASTIC/EPOXY; Minimum DS Breakdown Voltage: 25 V; No. of Terminals: 3;
NTD6414AN-1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 100 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
NTD6415AN-1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; JESD-609 Code: e3; Avalanche Energy Rating (EAS): 79 mJ;
NTD6415ANT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 2; Maximum Pulsed Drain Current (IDM): 89 A; Terminal Finish: TIN;
NTD60N02R
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (Abs) (ID): 32 A;
NTD60N02R-032G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-30 Code: R-PSIP-T3; Operating Mode: ENHANCEMENT MODE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NTD60N02RT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; No. of Terminals: 2; Package Style (Meter): SMALL OUTLINE;
NTD60N02R-35
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Maximum Drain Current (ID): 32 A; JESD-30 Code: R-PSIP-T3;
NTD60N02RT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Terminal Position: SINGLE; Maximum Drain Current (ID): 32 A;
NTD60N02R-032
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain Current (ID): 32 A; Avalanche Energy Rating (EAS): 60 mJ; Terminal Position: SINGLE;
NTD60N02R-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 48 W; Package Style (Meter): IN-LINE; Maximum Drain Current (Abs) (ID): 32 A;
NTD60N03-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Case Connection: DRAIN; Maximum Drain Current (Abs) (ID): 60 A;
NTD60N02RG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Peak Reflow Temperature (C): 260; JESD-30 Code: R-PSSO-G2;
NTD600N80S3Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Maximum Pulsed Drain Current (IDM): 21 A; Terminal Finish: MATTE TIN;
NTD60N02R-001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; JESD-609 Code: e0; Terminal Position: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved