Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDB035N10A by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It features 120A Max Drain Current, 0.0035 ohm Max RDS(on), and 333W Max Power Dissipation. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a built-in DIODE, suitable for high-power requirements.
Median Price
$3.095
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.880
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$5.870
$2.810
DigiKey
$2.803
Newark
$6.050
Future Electronics
$3.070
$3.020
Arrow
$2.038
Flip Electronics (Authorized)
Rochester
$2.080
$1.860
$1.750
Verical
$2.325
$2.188
Master Electronics
$3.120
$2.030
$1.990
RS (Exports)
$5.366
$4.020
Digiode
$3.439
Nova Conductors
$4.308
Sensible Micro Corp
NAC Semi
$6.140
Chip Stock
Cyclops Electronics Ltd
Vyrian
Flip Electronics
IBS Electronics
$3.478
$2.721
$2.693
Prism Electronics
Rotakorn
Aztec Data Supply Inc.
$0.980
Advanced Electronics
$1.551
$1.411
$1.272
Semicontronic
$2.830
$2.759
$2.745
Ampacity Inc.
Corphita
$3.258
Corohmni
$3.267
Argo Parts USA
$3.868
Continental Prestige Electronics
$3.791
Netroflash
$4.222
Modulus Dynamics
$4.329
$4.286
$4.156
Microchip USA
$28.411
Metaverse IC Inc.
Perfect Parts
Futuretech Components
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
RC Electronics
$3.950
$3.600
$3.490
Kulean Microsystems
TANS Electronics
Lixinc
Alle Elektronik GmbH
Authorized Procurement Solutions
GreenTree Electronics
SupplyDigital Components
Supply Digital
Problanco Electronics
UHIMA Technologies
Kepictronics
Provides a durable and heat-resistant housing for the FET, ensuring reliable performance in various operating conditions.
N-channel FETs typically offer better power efficiency and switching speed compared to P-channel FETs, making them suitable for high-performance applications.
The high breakdown voltage allows the FET to handle high voltage loads and protects the circuit from overloading.
The built-in diode simplifies circuit design and provides reverse current protection, enhancing the overall reliability of the system.
With a high power dissipation rating, this FET can handle heavy loads without overheating, ensuring long-term operation.
Low on-resistance results in minimal power loss and heat generation, making the FET energy-efficient and suitable for high-current applications.
Power Field Effect Transistors (FET) FDB035N10A attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Additional Features:
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDB035N10A Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Description Chg 01/Apr/2016 Logo 17/Aug/2017
PCN Assembly/Origin - Multiple Parts 23/Jun/2022
PCN Packaging - Tape and Box/Reel Barcode Update 07/Aug/2014 TO263 31/Aug/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RC0805FR-0710RL
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
JANTX2N6796U
Infineon Technologies
JANTX2N6796U by Infineon Technologies is a power FET with N-channel configuration and built-in diode. It is used for switching applications, has a min DS breakdown voltage of 100V, and can handle a max pulsed drain current of 32A.
SIR873DP-T1-GE3
Vishay Intertechnology's SIR873DP-T1-GE3 is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a max IDM of 50A and EAS of 80mJ, this MOSFET has 0.0475 ohm Drain-Source On Resistance. Its small outline package and matte tin finish make it suitable for various electronic designs.
IRF840PBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Finish: MATTE TIN; JEDEC-95 Code: TO-220AB;
NTD20P06LT4G
NTD20P06LT4G by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, 50A IDM, and 0.15 ohm RDS(on). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 54W.
FQD16N25CTM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 160 W; Avalanche Energy Rating (EAS): 432 mJ; Moisture Sensitivity Level (MSL): 1;
FDD4685
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 69 W; Maximum Operating Temperature: 150 Cel; Maximum Feedback Capacitance (Crss): 205 pF;
FDS4935A
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Application: SWITCHING; Terminal Finish: MATTE TIN;
SQJ431AEP-T1_GE3
Vishay Intertechnology's SQJ431AEP-T1_GE3 is a P-CHANNEL FET with 200V DS Breakdown Voltage, 37A IDM, and 0.315 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance.
IRLML6346TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
FDMS86252L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Case Connection: DRAIN; No. of Elements: 1;
IRF7425TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;
BSZ042N06NSATMA1
Infineon's BSZ042N06NSATMA1 is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. Featuring a single configuration with built-in diode, it offers 160A max pulsed drain current and 0.0042 ohm max drain-source resistance. Operating in enhancement mode, this MOSFET has an operating temperature range of -55 to 150 °C.
LND150N8-G
Microchip Technology
LND150N8-G by Microchip is a N-CHANNEL FET with 0.03A IDM, ideal for SWITCHING applications. Operating in DEPLETION MODE, it has a 1.6W power dissipation and 1000 ohm RDS(on). With a peak temperature of 260C, it's suitable for surface mount designs in various electronic systems.
SIR422DP-T1-GE3
Vishay Intertechnology's SIR422DP-T1-GE3 is an N-channel power FET with a built-in diode, ideal for switching applications. It features a min DS breakdown voltage of 40V, max pulsed drain current of 70A, and max operating temperature of 150°C. This MOSFET has a package style of small outline and offers low drain-source on resistance at 0.0066 ohm.
CSD19537Q3T
CSD19537Q3T by Texas Instruments is an N-CHANNEL FET for SWITCHING applications. It features a Max Pulsed Drain Current of 219A, Min DS Breakdown Voltage of 100V, and Max Operating Temperature of 150°C. This SINGLE configuration transistor has a Surface Mount design with METAL-OXIDE SEMICONDUCTOR technology.
NDT3055
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Transistor Element Material: SILICON; JESD-30 Code: R-PDSO-G4;
FQP3P50
FQP3P50 by Onsemi is a P-CHANNEL Power FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 10.8A and EAS of 250mJ, making it suitable for high-power operations. With an operating temperature up to 150°C, this MOSFET offers reliable performance in various industrial settings.
BSP230,135
NXP Semiconductors' BSP230,135 is a P-CHANNEL FET with 300V DS breakdown voltage. Ideal for switching applications, it features a single configuration with built-in diode and operates in enhancement mode. With 0.75A max pulsed drain current and 17 ohm max drain-source resistance, this MOSFET can handle various power requirements efficiently.
FDS4675
FDS4675 by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 50A and ID of 11A, with 0.013 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE and can withstand temperatures from -55 to 175 °C.
BSC093N15NS5ATMA1
Infineon BSC093N15NS5ATMA1 is a N-CHANNEL FET with 150V DS breakdown voltage, 0.0093 ohm RDS(on), and 348A IDM. Ideal for switching applications due to its built-in diode, it operates in enhancement mode and has an EAS of 130mJ. The transistor's small outline package makes it suitable for surface mount designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDB035N10A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 333 W; No. of Terminals: 2; Package Style (Meter): SMALL OUTLINE;
FDB075N15A
The Onsemi FDB075N15A is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 522A and EAS of 588mJ, operating in ENHANCEMENT MODE. With a low 0.0075 ohm RDS(on), it can handle up to 120A ID current, making it suitable for high-power applications.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 333 W; Maximum Drain Current (ID): 120 A; Terminal Finish: MATTE TIN;
FDB070AN06A0
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 175 W; No. of Elements: 1; Transistor Element Material: SILICON;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 175 W; Maximum Drain Current (ID): 15 A; Operating Mode: ENHANCEMENT MODE;
FDB0170N607L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Maximum Turn On Time (ton): 200 ns; Operating Mode: ENHANCEMENT MODE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Package Body Material: PLASTIC/EPOXY; Maximum Turn Off Time (toff): 193 ns;
FDB047N10
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 375 W; Package Body Material: PLASTIC/EPOXY; No. of Elements: 1;
FDB047N10 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 0.0047 ohm RDS(on). It is used for SWITCHING applications, featuring 656A IDM and 1153mJ EAS. Ideal for high-power switching circuits requiring low on-resistance.
FDB0105N407L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 300 W; Peak Reflow Temperature (C): 245; Maximum Drain-Source On Resistance: .0008 ohm;
FDB0105N407L by Onsemi is a N-CHANNEL Power FET with 40V DS Breakdown Voltage and 460A Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 2540A Pulsed Drain Current, and 1109mJ Avalanche Energy Rating. Suitable for surface mount with GULL WING terminals, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 175°C.
FDB075N15A_F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Transistor Application: SWITCHING;
FDB075N15A-F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 333 W; No. of Terminals: 2; Terminal Position: SINGLE;
FDB0190N807L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; No. of Terminals: 6; Maximum Drain Current (ID): 270 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Maximum Time At Peak Reflow Temperature (s): 30; Maximum Pulsed Drain Current (IDM): 1440 A;
FDB050AN06A0
FDB050AN06A0 by Onsemi is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 18A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 0.005 ohm On Resistance, and operates in ENHANCEMENT MODE.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 245 W; JESD-30 Code: R-PSSO-G2; Terminal Form: GULL WING;
FDB070AN06A0_F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 175 W; Maximum Drain-Source On Resistance: .007 ohm; Terminal Position: SINGLE;
FDB070AN06A0_F085 by Onsemi is a N-CHANNEL power field effect transistor (FET) with a min DS breakdown voltage of 60V. It is suitable for switching applications and has a max drain current of 15A. This surface mount transistor has a small outline package style and operates in enhancement mode.
FDB035AN06A0_F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 310 W; JESD-609 Code: e3; Maximum Drain-Source On Resistance: .0035 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved