Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Infineon's IRLML0030TRPBF-1 is a N-channel Power FET with 30V DS breakdown voltage and 21A IDM. Ideal for applications requiring high power dissipation up to 1.3W, such as in small outline packages where space is limited. Operating in enhancement mode, it offers low 0.027 ohm drain-source resistance for efficient performance.
Median Price
$0.254
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.244
Rochester
$0.264
$0.219
$0.196
Avnet
Bristol Electronics
$0.600
$0.300
$0.210
Vyrian
Nova Conductors
Digiode
Semicontronic
$0.050
$0.049
$0.048
Aztec Data Supply Inc.
$0.491
Modulus Dynamics
$0.628
$0.603
$0.578
Corohmni
$1.750
Advanced Electronics
$2.023
$1.922
AZTECH Wire
$18.115
Ampacity Inc.
$43.050
Component Stockers USA
$99.990
Metaverse IC Inc.
Kepictronics
Continental Prestige Electronics
Argo Parts USA
Futuretech Components
Corphita
Bastille Electronics
Robosynatics
$6.852
Lucentia Tech
PLASTIC/EPOXY material provides good insulation and mechanical protection for the transistor, ensuring reliable performance in various operating conditions.
N-CHANNEL transistors are known for their high efficiency and fast switching speeds, making this FET suitable for applications requiring precision and speed.
The built-in diode allows for efficient handling of back EMF in inductive loads, reducing the need for additional circuitry and simplifying design.
The high breakdown voltage of 30V ensures the FET can handle higher voltage levels, providing reliable operation in demanding applications.
With a maximum pulsed drain current of 21A, this FET can handle high peak currents, making it suitable for power applications that require high pulse current capability.
The maximum power dissipation of 1.3W ensures that the FET can operate efficiently without overheating, enabling reliable performance in various environmental conditions.
Power Field Effect Transistors (FET) IRLML0030TRPBF-1 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Infineon Technologies
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JEDEC-95 Code:
JESD-30 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Element Material:
IRLML0030TRPBF-1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
Vishay Semiconductors
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1552200168
Molex
WIRE AND CABLE;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Nte Electronics
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
IRFR4620TRLPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 144 W; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
FDV301N-NB9V008
FDV301N-NB9V008 by Fairchild Semiconductor is a N-CHANNEL FET with 0.5A max drain current and 0.35W max power dissipation in enhancement mode. Ideal for surface mount applications, it operates at up to 150°C making it suitable for various power management circuits.
FDS4559-F085
FDS4559-F085 by Onsemi is a N-CHANNEL Power FET for switching applications. It features 60V DS breakdown voltage, 4.5A max drain current, and 0.055 ohm max on resistance. With a small outline package style and gull wing terminals, it operates in enhancement mode at up to 150°C peak temperature.
MSCSM170AM11CT3AG
Microchip Technology
MSCSM170AM11CT3AG by Microchip Technology is a N-CHANNEL FET with 1700V DS Breakdown Voltage, 480A IDM, and 0.0113 ohm RDS(on). It is used for SWITCHING applications in SERIES CONNECTED configuration. Operating from -40 to 175 °C, it features METAL-OXIDE SEMICONDUCTOR technology and SILICON CARBIDE material.
IRLML2244TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Operating Mode: ENHANCEMENT MODE; Package Style (Meter): SMALL OUTLINE;
ZXMP6A17E6TA
ZXMP6A17E6TA by Diodes Inc. is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 13.6A IDM, 3A ID, and 0.125 ohm RDS(ON). With a max power dissipation of 1.92W and operating temperature up to 150°C, it's suitable for various electronic designs.
IRF7304TRPBF
Infineon Technologies
IRF7304TRPBF by Infineon Technologies is a P-CHANNEL FET with 20V DS Breakdown Voltage and 3.6A ID. It features a built-in diode, 0.09 ohm RDS(on), and operates in enhancement mode. Ideal for power management applications requiring high drain current capabilities in compact designs.
IRF9358TRPBF
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Style (Meter): SMALL OUTLINE; Avalanche Energy Rating (EAS): 210 mJ;
IRF7103TRPBF
IRF7103TRPBF by Infineon Technologies is a N-CHANNEL Power FET with 50V DS Breakdown Voltage and 3A Drain Current. It is used for SWITCHING applications in ENHANCEMENT MODE, featuring a 0.13 ohm On Resistance. This small outline transistor has 2 elements with built-in diode, operating up to 150°C.
SI7923DN-T1-GE3
Vishay Intertechnology's SI7923DN-T1-GE3 is a P-CHANNEL FET for switching applications. Features include 30V DS breakdown voltage, 20A max pulsed drain current, and 0.047 ohm max drain-source resistance. Ideal for power management in compact electronic devices with its small outline package and dual terminal position.
FDS6982AS
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Maximum Drain-Source On Resistance: .0135 ohm; Package Style (Meter): SMALL OUTLINE;
IRFP460APBF
Vishay Intertechnology's IRFP460APBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage and 80A IDM. Ideal for SWITCHING applications, it features a max power dissipation of 280W and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C.
JANTX2N6796
JANTX2N6796 by Infineon Technologies is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 32A IDM, 75mJ EAS, and 0.195 ohm RDS(on). Operating from -55 to 150 °C, it has a max power dissipation of 25W in a CYLINDRICAL package.
PSMN5R5-60YS,115
The NXP Semiconductors PSMN5R5-60YS,115 is a single N-channel power FET with 100A max drain current and 130W max power dissipation. Ideal for applications requiring high-power handling in enhancement mode operation, such as industrial motor control and power supplies.
IRF740PBF
Vishay Intertechnology's IRF740PBF is a N-CHANNEL Power FET with 400V DS Breakdown Voltage and 40A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 520mJ EAS rating, and 0.55 ohm RDS(on).
IRF7103TRPBF-1
Power Field-Effect Transistors;
IRF840PBF
Vishay Intertechnology's IRF840PBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. Ideal for SWITCHING applications, it features 32A IDM and 510mJ EAS ratings. The transistor operates in ENHANCEMENT MODE with 0.85 ohm RDS(on) and can handle up to 125W power dissipation.
BSP315P
BSP315P by Infineon Technologies is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 4.68A and EAS of 24mJ, operating in ENHANCEMENT MODE at up to 150°C. This SMALL OUTLINE transistor has 0.8 ohm RDS(on) and DUAL terminal position for efficient power dissipation.
BSC035N10NS5ATMA1
Infineon BSC035N10NS5ATMA1 is a N-CHANNEL FET with 100V DS Breakdown Voltage, 0.0035 ohm RDS(on), and 400A IDM. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Features METAL-OXIDE SEMICONDUCTOR tech in a SMALL OUTLINE package with DUAL terminals.
IRFP260NPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Qualification: Not Qualified; Transistor Application: SWITCHING;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDN537N
FDN537N by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 25A and ID of 8A, with 0.023 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE and has a max temp of 150°C, making it suitable for various power management tasks.
IRLML6401TRPBF
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
IRLML6402TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
IRLML2502TRPBF
IRLML2502TRPBF by Infineon Technologies is a N-CHANNEL power FET with a min DS breakdown voltage of 20V. It is used for switching applications and has a max drain current of 4.2A.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain-Source On Resistance: .045 ohm;
IRLML6401TRPBF-1
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; No. of Elements: 1;
Infineon's IRLML6401TRPBF-1 is a P-channel FET with 12V DS breakdown voltage, 34A IDM, and 0.05 ohm RDS(on). Ideal for power management applications due to its small outline package style and high operating temperature of 150°C.
IRLML6344TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
IRLML0040TRPBF
Infineon's IRLML0040TRPBF is a N-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 15A IDM, 3.6A ID, and 0.056 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it offers high performance in compact designs.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Terminal Form: GULL WING; JEDEC-95 Code: TO-236AB;
IRLML9301TRPBF
Infineon's IRLML9301TRPBF is a P-CHANNEL FET for SWITCHING applications. Features include 30V DS Breakdown Voltage, 15A IDM, and 0.064 ohm RDS(ON). With a small outline package style, it operates b/w -55 to 150 °C and has a max power dissipation of 1.3W.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Operating Mode: ENHANCEMENT MODE; Terminal Finish: Matte Tin (Sn);
IRLML0100TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Package Style (Meter): SMALL OUTLINE; JEDEC-95 Code: TO-236AB;
IRLML0100TRPBF by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for SWITCHING applications. It features a max drain current of 1.6A, 0.22 ohm on-resistance, and 1.3W power dissipation in a SMALL OUTLINE package. Operating from -55 to 150 °C, it's suitable for various ENHANCEMENT MODE switching tasks.
IRLML5203TRPBF
Infineon's IRLML5203TRPBF is a P-CHANNEL FET for SWITCHING applications. Features include 30V DS Breakdown Voltage, 24A IDM, and 0.098 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it's ideal for power management in various electronic devices.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; No. of Elements: 1; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRLML0060TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Moisture Sensitivity Level (MSL): 1; Package Body Material: PLASTIC/EPOXY;
Infineon's IRLML0060TRPBF is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a single configuration with built-in diode, 11A Max Pulsed Drain Current, and 0.092 ohm Max Drain-Source On Resistance. Operating in -55 to 150 °C range, it comes in small outline package suitable for surface mount technology.
IRLML0030TRPBF
Infineon's IRLML0030TRPBF is a N-CHANNEL FET with 30V DS Breakdown Voltage and 5.3A Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 1.3W Power Dissipation, and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150 °C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved