Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NOM04A4-MR11G by Onsemi is a CMOS image sensor with 3.1-3.5V supply voltage range, 0-50 °C operating temperature, and 600mA max current. This rectangular sensor is ideal for applications requiring analog voltage output in imaging systems or devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
TANS Electronics
Problanco Electronics
UHIMA Technologies
Kulean Microsystems
Corphita
Corohmni
Provides sufficient power for the image sensor without exceeding its maximum capabilities.
Compact size allows for easy integration into various devices and systems.
CMOS technology offers high sensitivity and low noise for quality image capture.
Slim profile enables installation in space-constrained environments.
Standard shape facilitates compatibility with existing mounting and assembly processes.
Lowest voltage requirement ensures efficient power consumption and performance.
Wide operating temperature range allows for use in various environmental conditions.
Analog output simplifies interfacing with other analog systems and components.
Can function reliably in low-temperature environments without performance degradation.
Handles high current requirements for continuous image processing and data transmission.
Long length provides ample surface area for sensor elements, enhancing image capture capabilities.
Image Sensors NOM04A4-MR11G attributes and parameters. Explore more Image Sensors devices from Onsemi
Body Width:
Body Height:
Body Length/Diameter:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Type:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
Semtech
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
NOII4SM6600A-QDC
NOII4SM6600A-QDC by Onsemi features a pixel size of 3.5x3.5 um, operates at a max supply voltage of 2.625 V, and has a master clock of 40 MHz. This image sensor is ideal for applications requiring high-resolution imaging with a dynamic range of 59 dB and an output interface type of 3-WIRE INTERFACE.
AR0330CS1C12SPKA0-CP
The Onsemi AR0330CS1C12SPKA0-CP is a 1/3 inch CMOS image sensor with 2304x1296 pixels. It operates at 27 MHz with a dynamic range of 69.5 dB and outputs digital voltage from 0.40-1.40V. Ideal for applications requiring high-resolution imaging and fast frame rates up to 60 fps, it features a compact square package suitable for surface mounting.
AR0330CM1C25SUD20
Onsemi's AR0330CM1C25SUD20 is a 2.2x2.2um CMOS image sensor with 2304H x 1536V pixels, operating at 27MHz clock rate. It offers a dynamic range of 69.5dB and spectral response of 350-1150nm, suitable for applications requiring high-resolution imaging in automotive cameras and surveillance systems.
NOIP1SE012KA-GTI
NOIP1SE012KA-GTI by Onsemi is an image sensor with 4.5x4.5 um pixel size, 360 MHz master clock, and 4096 horizontal pixels. It is ideal for applications requiring high-speed imaging with a frame rate of 160 fps and a dynamic range of 59 dB in a compact rectangular package measuring 43.1mm x 36.1mm x 3.5mm.
KLI-8023-RAA-ED-AE
KLI-8023-RAA-ED-AE by Onsemi is an Image Sensor with 9x9 um pixel size, 8002 horizontal and vertical pixels. It operates b/w 0 to 70 °C, with a dynamic range of 87 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
AR0138AT3R00XUEA0-DPBR-E
Onsemi AR0138AT3R00XUEA0-DPBR-E is a 1/2.6" CMOS image sensor with 1288x968 resolution, 4.2um pixel size, and 69fps frame rate. Ideal for surface mount applications in cameras, offering a rectangular package style with solder termination and 2-wire interface for seamless integration.
TC241-22
Texas Instruments
TC241-22 by Texas Instruments is an image sensor with 754x244 pixels, 11.5X27um size, and operates at -10 to 45 °C. It requires a 12V power supply and features THROUGH HOLE MOUNT. Ideal for applications requiring high-resolution imaging in varying temperature conditions.
NOIP1FN0500A-QTI
NOIP1FN0500A-QTI by Onsemi is an image sensor with 800x600 resolution, 4.8um pixel size, and 60dB dynamic range. It operates at a max clock of 72MHz and has a frame rate of 545fps. Ideal for applications requiring high-speed digital imaging in industrial or scientific settings.
VSP7502ZWVR
VSP7502ZWVR by Texas Instruments is an 8mm square CCD image sensor with a supply voltage range of 1.65-1.95V, operating temperature from -25 to 85°C, and digital output voltage of 1.50-2.10V. Ideal for applications requiring precise imaging in compact devices due to its small form factor and surface mounting feature.
AR0543CSSC25SUD20
The Onsemi AR0543CSSC25SUD20 image sensor features 2592x1944 pixels, 1.40um pixel size, and a 27 MHz master clock. Ideal for digital cameras, surveillance systems, and automotive applications due to its high sensitivity of 0.82 V/lx.s and compact rectangular package design.
KAI-08050-CBA-JB-AE
KAI-08050-CBA-JB-AE by Onsemi is a 5.5x5.5 um CCD image sensor with 3296 (H) x 2472 (V) pixels, offering a dynamic range of 64 dB. Its rectangular package style and solder termination make it suitable for industrial machine vision applications requiring high-resolution imaging in a 4/3 optical format.
ASX340AT2C00XPED0-DRBR1
ASX340AT2C00XPED0-DRBR1 by Onsemi is a 5600x5600 pixel CMOS image sensor with a 27 MHz master clock and 1/4 inch optical format. It operates b/w -40 to 85 °C, has a dynamic range of 87 dB, and outputs digital voltage in the range of 0.84-1.96V. Ideal for applications requiring high-resolution imaging at up to 60 fps with a sensitivity of 16.5 V/lx.s.
KAC-00401-CBC-LB-A0
Onsemi's KAC-00401-CBC-LB-A0 Image Sensor features 6.7X6.7um pixel size, 3.3V power supply, and operates b/w -40 to 105 °C. With 768x488 pixels, it is ideal for surface mount applications in various imaging systems.
AR0135CS2C19SUD20
IMAGE SENSOR,CMOS; Optical Format (inch): 1/3; Additional Features: GLOBAL SHUTTER; Array Type: FRAME;
TSL1402R
Ams Ag
TSL1402R by Ams Ag is an image sensor with a pixel size of 63.5X55.5 um and output range of 1.60-2.40V, suitable for applications requiring a dynamic range of 72 dB. With a spectral response of 300-1100 nm, this CCD sensor operates b/w temperatures of 0 to 70 °C, making it ideal for various imaging solutions.
AR0220AT3R00XUEA0-VL-DPBR
The Onsemi AR0220AT3R00XUEA0-VL-DPBR is an image sensor with 1828x948 pixels, 120dB dynamic range, and 60fps frame rate. It operates b/w -40 to 105 °C and uses a 2-wire interface. Ideal for applications requiring high-resolution imaging in compact devices.
TC244-10
TC244-10 by Texas Instruments is an image sensor with 755x242 pixels, pixel size of 8.5x19.8 um, and operates at temperatures from -30 to 85 °C. It requires a 12V power supply and features THROUGH HOLE MOUNT for easy installation. Ideal for applications requiring high-resolution imaging in various environments.
KAI-08051-ABA-JD-BA
The Onsemi KAI-08051-ABA-JD-BA is an image sensor with 5.5x5.5 um pixel size, 3364 horizontal pixels, and 2520 vertical pixels. It operates b/w -50 to 70 °C and has a dynamic range of 66 dB. Ideal for applications requiring high-resolution imaging in industrial cameras or surveillance systems.
NOIP1FN025KA-GDI
NOIP1FN025KA-GDI by Onsemi is an image sensor with 4.5x4.5 um pixel size, 360 MHz master clock, and 5120x5120 resolution. It operates b/w -40 to 85 °C and has a dynamic range of 59 dB. Ideal for high-resolution imaging applications requiring fast frame rates up to 80 fps.
KAI-11002-CBA-CD-B2
KAI-11002-CBA-CD-B2 by Onsemi is an image sensor with 9x9 um pixel size, 4008 horizontal pixels, and 2672 vertical pixels. It operates b/w -50 to 70 °C with a dynamic range of 66 dB. Ideal for applications requiring high-resolution imaging in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NOM02A4-AG01G
IMAGE SENSOR,CMOS;
NOM02A4-AR03G
IMAGE SENSOR,CMOS; Mounting Feature: PANEL MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.90-1.1V; Housing: PLASTIC;
NOM02A4-MW60G
IMAGE SENSOR,CMOS; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Body Width: 19 inch; Maximum Operating Temperature: 50 Cel; Body Height: 19.05 mm;
NOM02A6-AR25G
IMAGE SENSOR,CMOS; Mounting Feature: PANEL MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.90-1.1V; Minimum Supply Voltage: 4.5 V;
NOM02A6-AR77G
IMAGE SENSOR,CMOS; Mounting Feature: PANEL MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 2.40-2.60V; Body Length/Diameter: 124 mm;
NOM02A6-AW49G
NOM02B4-DR11G
IMAGE SENSOR,CMOS; Mounting Feature: PANEL MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.80-4.0V; Maximum Supply Voltage: 5.5 V;
NOM03A6-AY17G
NOM04A7-AR11G
IMAGE SENSOR,CMOS; Mounting Feature: PANEL MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 1.80-2.0V; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved