Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi 2N2422A is a Unijunction Transistor with max emitter current of 70mA, max inter-base voltage of 65V, and max power dissipation of 0.3W. It is used in applications requiring precise triggering and timing control such as pulse generators and thyristor firing circuits.
Median Price
$23.440
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
American Microsemiconductor Inc.
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Native Components
$17.180
Northwest PG Solutions
$18.898
$17.008
Corohmni
Problanco Electronics
SupplyDigital Components
Corphita
TANS Electronics
UHIMA Technologies
Kulean Microsystems
The metal package provides good heat dissipation, ensuring the transistor operates efficiently and reliably even at high temperatures.
The high maximum emitter current allows for handling higher power applications and greater flexibility in circuit design.
The high maximum inter-base voltage allows for reliable operation in circuits with higher voltages without risking damage to the transistor.
The low power dissipation helps in reducing energy consumption and minimizing heat generation, improving the overall efficiency of the circuit.
The high maximum operating temperature ensures the transistor can withstand harsh environmental conditions and operate reliably in a wide range of applications.
The low minimum operating temperature allows the transistor to function in extreme cold environments without any issues.
The high maximum static inter-base resistance helps in reducing leakage current and ensuring stable performance in various circuit configurations.
The low minimum static inter-base resistance allows for efficient switching operation and minimizes power losses in the circuit.
The minimum valley point current ensures reliable triggering of the transistor and prevents false turn-on in the circuit.
The high maximum peak point current allows for handling transient currents effectively and maintaining stable operation in dynamic circuit conditions.
Unijunction Transistors (UFT) 2N2422A attributes and parameters. Explore more Unijunction Transistors (UFT) devices from Onsemi
Configuration:
Maximum Emitter Current:
Maximum Inter-base Voltage:
Maximum Intrinsic Stand-off Ratio:
Minimum Intrinsic Stand-off Ratio:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Peak Point Current:
Maximum Power Dissipation (Abs):
Maximum Static Inter-Base Resistance:
Minimum Static Inter-Base Resistance:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Element Material:
Minimum Valley Point Current:
2N2422A Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Microsemi
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Meritek Electronics
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N1671
Texas Instruments
2N1671 by Texas Instruments is a Unijunction Transistor (UFT) with a max emitter current of 50mA and max power dissipation of 0.45W. It is commonly used for switching applications due to its configuration as a single transistor with wire terminals, suitable for operating temperatures ranging from -65°C to 140°C.
2N2646
General Semiconductor
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Terminal Form: WIRE; JEDEC-95 Code: TO-18;
2N492A
2N492A by Texas Instruments is a Unijunction Transistor for switching applications. It has a max emitter current of 70mA, operating temperature range of -65 to 140°C, and package style in cylindrical shape. With a min static inter-base resistance of 6.2kohm and max peak point current of 12mA, it is ideal for low-power electronic circuits.
2N493A
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .45 W; JEDEC-95 Code: TO-5; Minimum Operating Temperature: -65 Cel;
2N1671A
2N1671A by Texas Instruments is a Unijunction Transistor (UFT) with a max emitter current of 50mA and max power dissipation of 0.45W. It is commonly used for switching applications due to its single configuration and silicon transistor element material. Operating temperature ranges from -65°C to 140°C, making it suitable for various electronic devices.
2N1671B
2N1671B by Texas Instruments is a Unijunction Transistor for switching applications. It has a max emitter current of 50mA, operating temperature range of -65 to 140°C, and max power dissipation of 0.45W. With a package style of cylindrical and isolated case connection, it offers reliable performance in various electronic circuits.
2N492B
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .45 W; Package Shape: ROUND; Package Body Material: METAL;
2N494C
The Onsemi 2N494C is a Unijunction Transistor for switching applications. It has a max emitter current of 70mA, max inter-base voltage of 65V, and max power dissipation of 0.45W. Ideal for low-power switching circuits due to its silicon element material and operating temperature range from -65 °C to 140°C.
2N4870
Nte Electronics
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -55 Cel;
2N2421B
The Onsemi 2N2421B is a Unijunction Transistor with max emitter current of 70mA, max inter-base voltage of 65V, and max power dissipation of 0.3W. It is used in applications requiring a single configuration UFT for temperature range -65 to 140 °C.
2N4948
2N4948 by Texas Instruments is a Unijunction Transistor (UFT) with a max emitter current of 50mA and max power dissipation of 0.36W. It is commonly used for switching applications due to its single configuration and silicon transistor element material.
2N2421A
The Onsemi 2N2421A is a Unijunction Transistor with max emitter current of 70mA, max inter-base voltage of 65V, and max power dissipation of 0.3W. It is used in applications requiring a single configuration transistor for temperature range -65 to 140 °C, such as pulse generators and timing circuits.
NTE6410
NTE6410 by Nte Electronics is a plastic/epoxy unijunction transistor with single configuration for switching applications. It has a max emitter current of 50mA, max inter-base voltage of 35V, and max power dissipation of 0.3W. Ideal for low-power switching circuits due to its compact cylindrical package design and silicon element material.
Philips Components
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Package Style (Meter): CYLINDRICAL; Package Shape: ROUND; JEDEC-95 Code: TO-92;
2N2420B
The Onsemi 2N2420B is a Unijunction Transistor with max emitter current of 70mA, max inter-base voltage of 65V, and max power dissipation of 0.3W. It is used in applications requiring precise switching control like pulse generators and timing circuits.
Harris Semiconductor
Unijunction Transistors; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Maximum Intrinsic Stand-off Ratio: .75; Maximum Emitter Current: 50 mA; Maximum Peak Point Current: 5 mA;
2N2646 by Texas Instruments is a Unijunction Transistor (UFT) with a max emitter current of 50mA, ideal for switching applications. It has a max operating temperature of 125°C and min intrinsic stand-off ratio of 0.56, making it suitable for various electronic circuits. With a package style of cylindrical and terminal form as wire, it offers reliable performance in diverse environments.
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .45 W; JESD-30 Code: O-MBCY-W3; Minimum Intrinsic Stand-off Ratio: .47;
2N3980
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .36 W; Maximum Emitter Current: 50 mA; Minimum Operating Temperature: -65 Cel;
Silicon Group
Unijunction Transistors; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Maximum Peak Point Current: 5 mA; Minimum Static Inter-Base Resistance: 4 kohm; Maximum Intrinsic Stand-off Ratio: .75;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2N2417A
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Package Shape: ROUND; Minimum Operating Temperature: -65 Cel;
2N2417B
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Package Body Material: METAL; Transistor Element Material: SILICON;
2N2418A
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Package Shape: ROUND; JEDEC-95 Code: TO-18;
2N2418B
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Minimum Static Inter-Base Resistance: 6.2 kohm; Maximum Intrinsic Stand-off Ratio: .62;
2N2419A
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; JESD-609 Code: e0; Package Body Material: METAL;
2N2419B
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; JESD-30 Code: O-MBCY-W3; Minimum Valley Point Current: 8 mA;
2N2420A
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Terminal Position: BOTTOM; Package Body Material: METAL;
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Maximum Intrinsic Stand-off Ratio: .68; Package Body Material: METAL;
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; JESD-609 Code: e0; Maximum Peak Point Current: 12 mA;
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; JESD-609 Code: e0; Maximum Intrinsic Stand-off Ratio: .75;
Central Semiconductor
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Package Shape: ROUND; Maximum Static Inter-Base Resistance: 9.1 kohm;
2N2421
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Minimum Operating Temperature: -65 Cel; No. of Terminals: 3;
2N2422B
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; No. of Terminals: 3; Maximum Emitter Current: 70 mA;
2N2422
Asi Semiconductor
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .3 W; Minimum Operating Temperature: -65 Cel; Package Style (Meter): CYLINDRICAL;
Digitron Semiconductors
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .35 W; No. of Terminals: 3; Package Style (Meter): CYLINDRICAL;
2N2421AHR
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .35 W; Package Body Material: METAL; Maximum Operating Temperature: 175 Cel;
2N2421HR
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .35 W; Maximum Emitter Current: 70 mA; Additional Features: HIGH RELIABILITY;
2N2421-PBF
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .35 W; No. of Terminals: 3; JEDEC-95 Code: TO-18;
2N2422-PBF
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .35 W; Minimum Intrinsic Stand-off Ratio: .62; Minimum Static Inter-Base Resistance: 6.2 kohm;
2N2422BHR
Unijunction Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .35 W; Package Body Material: METAL; Maximum Inter-base Voltage: 65 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved