Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Image Sensors;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Assy Fe
1+ parts
100+ parts
1k+ parts
10k+ parts
Since being founded in 1995 OMNIVISION has been at the leading-edge of technology, developing and delivering advanced digital imaging, analog, and touch & display solutions for multiple applications across several industries. As a global fabless semiconductor organization, our award-winning innovative technologies have enabled smoother human/machine interfacing solutions within the automotive, medical, security & surveillance, computing, mobile phone, and emerging technology spaces. Whether it be developing the first mobile handset camera accessory in 2002, introducing the world’s smallest NTS camera in 2006 or launching PureCel CMOS image sensors in 2013, our dedication to providing reliable, innovative imaging and sensing solutions continue to be the primary aim. Our commitment to excellence is demonstrated by our drive to continuously improve what we do through our adherence to forward-looking principles. Dedication to quality and service is integral to our business practices. Customer satisfaction is paramount to our business.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
4554
Jw Miller Magnetics
Other Semiconductors;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
11KAI-04070-PBA-JD-AE
The Onsemi 11KAI-04070-PBA-JD-AE is an image sensor with 2048x2048 pixels, 7.4um pixel size, and 70.5dB dynamic range. It operates b/w -50 to 70 °C and has a max supply voltage of 15.5V. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
AR0237ATSC12XUEA0-DPBR
Onsemi's AR0237ATSC12XUEA0-DPBR is a 3x3 um CMOS image sensor with 1928H x 1088V pixels, offering a dynamic range of 96 dB. Operating at -40 to 105 °C, it has a digital voltage output interface and supports frame rates up to 60 fps. Ideal for applications requiring high-resolution imaging in compact devices.
11KAI-04070-CBA-JD-BA
The Onsemi 11KAI-04070-CBA-JD-BA is an image sensor with 2048x2048 pixels, 7.4um pixel size, and 70.5dB dynamic range. It operates b/w -50 to 70 °C, suitable for industrial imaging applications requiring high-resolution and low-light performance. The rectangular package style with through-hole mounting makes it easy to integrate into various systems.
KAF-8300-AXC-CD-AE
The Onsemi KAF-8300-AXC-CD-AE is a CCD image sensor with 5.4x5.4 um pixel size, offering a dynamic range of 64.4 dB and 3326 horizontal pixels. It operates b/w -10 to 70 °C, making it suitable for high-resolution imaging applications in various industries such as astronomy and microscopy.
TC240
TC240 by Texas Instruments is an image sensor with 754x244 pixels, pixel size of 11.5X27 um, and operates at temperatures from -10 to 45 °C. It requires a power supply of 12V and features THROUGH HOLE MOUNT for easy installation. Ideal for applications requiring high-resolution imaging in various environments.
KAC-00401-CBC-LB-A0
Onsemi's KAC-00401-CBC-LB-A0 Image Sensor features 6.7X6.7um pixel size, 3.3V power supply, and operates b/w -40 to 105 °C. With 768x488 pixels, it is ideal for surface mount applications in various imaging systems.
KAI-04050-CBA-JB-B2-T
Onsemi's KAI-04050-CBA-JB-B2-T is a 5.5x5.5um CCD image sensor with 2336H x 1752V pixels, offering a dynamic range of 64dB. Operating b/w -50 °C to 70°C, it requires a 15V power supply and features through-hole mounting. Ideal for applications requiring high-quality imaging in various environmental conditions.
MT9V138D00STCK22BC1-200
MT9V138D00STCK22BC1-200 by Onsemi is an image sensor with 5.60X5.60 um pixel size, 27 MHz master clock, and 680 horizontal pixels. It operates b/w -30 to 70 °C and has a dynamic range of 74.8 dB. Ideal for digital cameras, surveillance systems, and automotive applications due to its high-quality imaging capabilities at a max supply voltage of 1.9 V.
AR0134CSSC00SPCA0-TRBR
AR0134CSSC00SPCA0-TRBR by Onsemi is a 1/3 inch CMOS image sensor with 1280x960 resolution, 3.75um pixel size, and 64dB dynamic range. It operates at -30 to 70 °C, with a max supply voltage of 1.95V and frame rate of 60fps. Ideal for digital cameras, surveillance systems, and automotive applications due to its high-quality imaging capabilities.
NOIP1SN0500A-QTI
NOIP1SN0500A-QTI by Onsemi is an Image Sensor with 4.80X4.80 um pixel size, 72 MHz master clock, and 800x600 resolution. Ideal for digital imaging applications requiring high frame rates up to 545 fps in a compact SQUARE package suitable for SURFACE mounting.
KLI-8023-RAA-ED-AE
KLI-8023-RAA-ED-AE by Onsemi is an Image Sensor with 9x9 um pixel size, 8002 horizontal and vertical pixels. It operates b/w 0 to 70 °C, with a dynamic range of 87 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
NOIP1FN0300A-QDI
NOIP1FN0300A-QDI by Onsemi is a 640x480 CMOS image sensor with 4.80um pixel size. It operates at 1.7-1.9V, has a master clock of 72MHz, and offers a dynamic range of 60dB. Ideal for high-speed imaging applications requiring digital voltage output and a frame rate of up to 815fps.
NOIP1SN0300A-QDI
NOIP1SN0300A-QDI by Onsemi features 4.80X4.80 um pixel size, 72 MHz master clock, and 640x480 resolution. This image sensor is ideal for applications requiring high-speed digital imaging with a dynamic range of 60 dB.
AR1630CSSC34SMD10
Onsemi's AR1630CSSC34SMD10 is a 1/3.2 inch CMOS image sensor with 4632x3492 pixels, offering digital output at 30 fps. Ideal for applications requiring high-resolution imaging in a compact form factor, such as surveillance cameras and industrial machine vision systems.
KAI-0330-AAA-CP-BA-DUALOUTPUT
KAI-0330-AAA-CP-BA-DUALOUTPUT by Onsemi is an image sensor with 9x9 um pixel size, 648 horizontal pixels, and 484 vertical pixels. It operates at a max supply voltage of 15.5V and min supply voltage of 12V. Ideal for applications requiring high-quality imaging in a compact form factor.
NOIP1SE1300A-QDI
NOIP1SE1300A-QDI by Onsemi is an image sensor with 1280x1024 pixels, 360 MHz master clock, and 60 dB dynamic range. Ideal for applications requiring high-speed digital imaging in industrial automation, surveillance systems, and medical devices.
KAI-04070-PBA-JD-AE
The Onsemi KAI-04070-PBA-JD-AE is a 7.4x7.4 um CCD image sensor with 2048x2048 pixels, offering an optical format of 4/3 inch and a dynamic range of 82 dB. It features an interline array type, solder termination, and through-hole mounting, suitable for high-resolution imaging applications in various industries.
KAI-1020M
IMAGE SENSOR,CCD;
OVM7692-RACA
Omnivision Technologies
Omnivision's OVM7692-RACA is a 1.75um CMOS image sensor with 1/13 inch optical format, offering 30 fps frame rate. It operates b/w -30°C to 70°C, providing digital output in a rectangular package style. Ideal for applications requiring high-quality imaging in varying temperature conditions.
MT9T031P12STC
Aptina
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.13-2.82; Additional Features: ELECTRONIC ROLLING SHUTTER, GLOBAL SHUTTER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved