Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Power Bipolar Transistors; Terminal Finish: TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Reference Standard: AEC-Q101; Peak Reflow Temperature (C): 260;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$3.058
AZTECH Wire
$5.580
$5.360
$5.250
$5.150
Futuretech Components
Supply Digital
Native Components
$2.697
Power Bipolar Junction Transistors (BJT) BCX56-16-Q attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Nexperia
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Reference Standard:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
BCX56-16-Q Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Founded in 2017, Nexperia is a leading provider of semiconductors, based out of Nijmegen, the Netherlands. It is owned by the partially state-owned Chinese company Wingtech Technology. With factories in Hamburg, Germany and Greater Manchester, England, Nexperia is able to provide its clients with high quality semiconductor products quickly and efficiently.On November 8, 2023, Vishay and Nexperia BV announced that they have entered into an agreement whereby Vishay will acquire Nexperia’s wafer fabrication facility and operations located in Newport, South Wales, U.K. for approximately $177,000 in cash, subject to customary post-closing adjustments. On November 8, 2023, Vishay remitted $8,750 to an escrow account as a deposit for the acquisition. Such amount is included within "Purchase of and deposits for businesses, net of cash acquired" on the consolidated statement of cash flows. To effect the transaction, Vishay will acquire a 100% interest in the legal entity Neptune 6 Limited, and its wholly-owned operating subsidiary, Nexperia Newport Limited, which owns and operates the Newport facility. The closing of the transaction is subject to U.K. government review and customary closing conditions, and is expected to occur in the first quarter of 2024.
CEO
Xuezheng Zhang (Wing)
CFO
Stefan Tilger
COO
Achim Kempe
Hamburg
Fabrication
Fab Initiation
1981
Germany
Wafer Capacity
36,000
Manchester (8-inch line)
2017
Australia
Hazelgrove
12,000
Manchester (6-inch line)
1998
22,000
Shanghai Fab
2022
China
Shanghai
Nexperia Newport
UK
Newport
34,000
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BD139-10
Samsung
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 1.5 A; Package Body Material: PLASTIC/EPOXY; Minimum DC Current Gain (hFE): 63;
TIP117
Micro Commercial Components
Power Bipolar Transistors; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; No. of Terminals: 3;
BD243C
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A; No. of Elements: 1;
BD1396STU
BD1396STU by Onsemi is a NPN BJT transistor with 80V VCEO, 1.5A IC, and 13W Ptot. Ideal for switching applications, it has a min hFE of 40 and operates up to 150°C. The package style is flange mount with through-hole terminals in a rectangular shape.
TIP127
Microsemi
PNP; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Package Style (Meter): FLANGE MOUNT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; JESD-609 Code: e0;
TIP41C
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
MJD122T4G
MJD122T4G by Onsemi is a NPN BJT with Darlington configuration, ideal for switching applications. It features a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and surface mount capability, it offers high power dissipation up to 20W in a compact design.
TIP112
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Terminal Position: SINGLE;
BD679A
Comset Semiconductors
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): .06 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 4 A;
BDX53C
Motorola
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 8 A; Additional Features: LEADFORM OPTIONS ARE AVAILABLE; Maximum Collector-Base Capacitance: 300 pF;
BD679
Baneasa S A
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 4 A; No. of Elements: 1; JESD-30 Code: R-PSFM-T3;
TIP3055
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2.5 MHz; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 15 A;
ULN2804A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; JESD-30 Code: R-PDIP-T18;
TIP111
Crimson Semiconductor
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Collector Current (IC): 2 A; Terminal Form: THROUGH-HOLE;
D44H11
New Jersey Semiconductor Products
NPN; Surface Mount: NO; Maximum Collector Current (IC): 10 A; Package Style (Meter): FLANGE MOUNT; Terminal Position: SINGLE; Maximum Collector-Emitter Voltage: 80 V;
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Case Connection: COLLECTOR;
BDW93C
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 12 A; Package Style (Meter): FLANGE MOUNT; Transistor Element Material: SILICON;
TIP115
TIP125
Texas Instruments
TIP125 by Texas Instruments is a PNP BJT with 65W power dissipation, 1000 min hFE, and 60V max collector-emitter voltage. Ideal for applications requiring high current amplification in a Darlington configuration with built-in resistor. Suitable for use in power control circuits due to its high operating temperature of 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74LV1T08GW
Nexperia
AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
PESD2ETH1G-T
PESD2ETH1G-T by Nexperia is a transient suppression device with common cathode configuration, 2 elements, and bidirectional polarity. It operates b/w -55 to 150 °C and has a max reverse voltage of 24 V. Ideal for protecting electronic circuits from voltage spikes in automotive and industrial applications.
PMEG050T150EIPD
PMEG120G20ELR
PESD3V3T1BL
74AVC8T245BQ
BUS TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
MJD44H11A
The Nexperia MJD44H11A is a NPN BJT transistor with VCEsat of 1V, hFE of 40, and IC of 8A. Ideal for switching applications, it has a max operating temp of 150°C and collector-emitter voltage of 80V. With a package style of small outline and surface mount capability, it offers high performance in power electronics.
PESD2CANFD24V-T
NXS0104PW-Q100
BUS TRANSCEIVER; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); Moisture Sensitivity Level (MSL): 1;
PNE20010ER
NCR421PAS
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: RECTANGULAR;
NCR420Z
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
BUK6D22-30E
Power Field-Effect Transistors; JESD-609 Code: e3; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1;
MJD45H11
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 80 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
PMH260UNE
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
PNS40010ER
GAN063-650WSA
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
PSMNR70-30YLH
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
NCR320U
LED DISPLAY DRIVER; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
74LVC1G14GX4
INVERTER; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
BCX5616TA
Diodes Incorporated
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 150 MHz; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 1 A;
BCX5616QTA
Diodes Inc.'s BCX5616QTA is a NPN BJT transistor for switching applications. Features include VCEsat of 0.5V, hFE of 100, and IC of 1A. With a max operating temp of 150°C, it's ideal for automotive electronics conforming to AEC-Q101 standards.
BCX5316TA
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 150 MHz; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 1 A;
BCX56-16
Secos
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): 1.2 W; Maximum Collector Current (IC): 1 A;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 130 MHz; Maximum Power Dissipation (Abs): 1.2 W; Maximum Collector Current (IC): 1 A;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 130 MHz; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 1 A;
BCX5316H6327XTSA1
Infineon Technologies
Infineon's BCX5316H6327XTSA1 is a PNP BJT with 2W power dissipation, hFE of 100, and IC of 1A. Ideal for surface mount applications, it operates up to 150°C making it suitable for power management in various electronic devices.
BCX5610TA
BCX5610TA by Diodes Inc. is a NPN BJT transistor for switching applications. It has a VCEsat of 0.5V, hFE of 63, and can handle up to 1A collector current. With a max operating temperature of 150°C, it is suitable for high-power switching circuits in various electronic devices.
BCX5616TC
BCX5616TC by Diodes Inc. is a NPN BJT transistor for switching applications. Features include VCEsat of 0.5V, hFE of 100, and IC of 1A. With a max operating temp of 150°C, it's ideal for power management in compact electronic devices.
BCX53-16
Power Bipolar Transistors; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 1.3 W; Maximum Collector Current (IC): 1 A;
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 1.3 W; Maximum Collector Current (IC): 1 A;
BCX5516TA
BCX5516TA by Diodes Inc. is a NPN BJT transistor for switching applications. Features include VCEsat of 0.5V, hFE of 100, and IC of 1A. Ideal for power management in small outline packages with max temp of 150°C.
BCX51-16,115
NXP Semiconductors
BCX51-16,115 by NXP Semiconductors is a PNP power bipolar junction transistor (BJT) with a max collector-emitter voltage of 45V and a max collector current of 1A. It is commonly used as an amplifier in various applications.
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): 1 A; Maximum Collector-Emitter Voltage: 45 V;
BCX56TA
BCX56TA by Diodes Inc. is a NPN BJT transistor with VCEsat of 0.5V, hFE of 25, and IC of 1A. Ideal for switching applications, it operates b/w -55 to 150°C with a max VCE of 80V. Its small outline package makes it suitable for surface mount designs.
BCX5316-13R
BCX5316-13R by Diodes Inc. is a PNP BJT transistor for switching applications. Features include VCEsat of 0.5V, hFE of 100, and IC of 1A. With a max operating temp of 150°C, it has a collector-emitter voltage of 80V and transition frequency of 150MHz.
BCX5416TA
BCX5516H6327XTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 1 A;
BCX56-10TX
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 155 MHz; Maximum Power Dissipation (Abs): 1.1 W; Maximum Collector Current (IC): 1 A;
BCX51-16
BCX51-16 by NXP is a PNP BJT transistor with 1W power dissipation, hFE of 100, and 45V collector-emitter voltage. Ideal for amplifier applications, it has a small outline package style and operates up to 150°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved