Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 900 MHz; Minimum DC Current Gain (hFE): 25; Terminal Form: THROUGH-HOLE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Corphita
RF Small Signal Bipolar Junction Transistors (BJT) PN5179/D75Z-18 attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from National Semiconductor
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
Highest Frequency Band:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Minimum Power Gain (Gp):
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
Maximum VCEsat:
PN5179/D75Z-18 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
BAV99
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Bharat Electronics
General Semiconductor
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Micro Commercial Components
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N3904
Thomson-csf Semiconductors
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Qualification: Not Qualified; Terminal Position: BOTTOM;
MPS6507RLRE
MPS6507RLRE by Onsemi is an NPN RF BJT transistor with a max collector-emitter voltage of 20V and max operating temp of 150 °C. Ideal for amplifier applications, it has a max collector current of 0.05A and transition frequency of 800MHz, housed in a cylindrical package with through-hole terminals.
TIS87
TIS87 by Texas Instruments is a NPN BJT transistor with 3 terminals, ideal for amplifier applications in the VHF band. It has a max power dissipation of 0.4W, hFE of 30, and fT of 500MHz. The package is cylindrical with wire terminals and can handle up to 45V collector-emitter voltage at 150°C operating temperature.
BFR93A,215
NXP Semiconductors' BFR93A,215 is a NPN RF BJT transistor with max. freq. of 6000 MHz and hFE of 40, ideal for L Band applications like amplifiers. It has a max. power dissipation of 0.35 W, operates up to 175°C, and features a small outline package with gull wing terminals for surface mount assembly.
934047460135
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 22000 MHz; Maximum Collector Current (IC): .012 A; Terminal Position: DUAL;
MPSH10ZL1
MPSH10ZL1 by Onsemi is an NPN RF BJT with 3 terminals, operating up to 150 °C. It has a max collector-emitter voltage of 25V and transition frequency of 650MHz. Ideal for ultra-high frequency applications due to its low capacitance and high-frequency band capabilities.
MPSH10RLRPG
MPSH10RLRPG by Onsemi is an NPN RF BJT transistor with a max operating temperature of 150°C. It has a min DC current gain of 60 and a nominal transition frequency of 650 MHz, making it suitable for amplifier applications in the ultra-high-frequency band. With a max collector-emitter voltage of 25V and a power dissipation of 0.35W, this transistor is ideal for high-frequency circuit designs.
HFA3127BZ96
Renesas Electronics
Renesas Electronics' HFA3127BZ96 is an NPN RF BJT with 5 elements, ideal for amplifier applications in the ultra-high frequency band. It features a max collector-emitter voltage of 8V and a nominal transition frequency of 8000MHz. This surface-mount transistor has a small outline package with 16 terminals in gull-wing form.
TIS110
TIS110 by Texas Instruments is a NPN BJT transistor with 3 terminals, ideal for switching applications. With a max power dissipation of 0.36W and max collector-emitter voltage of 40V, it operates at up to 150°C. Featuring a nominal transition frequency of 350MHz, it is housed in a cylindrical package suitable for RF small signal amplification.
934067695135
RF Small Signal Bipolar Transistors; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN; Maximum Time At Peak Reflow Temperature (s): 30;
NSVF5501SKT3G
NSVF5501SKT3G by Onsemi is an NPN RF BJT transistor with a max fT of 5500 MHz. It has a max power dissipation of 0.25 W and operates in the ultra-high frequency band, making it ideal for amplifier applications. This small outline transistor can handle up to 10 V collector-emitter voltage and operates b/w -55 °C to 150°C temperature range.
BLW32
New Jersey Semiconductor Products
NPN; Nominal Transition Frequency (fT): 3500 MHz; Maximum Collector Current (IC): .65 A; Transistor Element Material: SILICON; Maximum Collector-Emitter Voltage: 30 V; No. of Elements: 1;
MCH6001-TL-E
Sanyo Semiconductor
NPN; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 16 MHz; Maximum Power Dissipation (Abs): .6 W; Maximum Collector Current (IC): .15 A;
HFA3096BZ96
Intersil
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Maximum Collector-Emitter Voltage: 8 V;
934067707215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 11000 MHz; Maximum Power Dissipation (Abs): .45 W; Maximum Collector Current (IC): .065 A;
BFP640ESDH6327XTSA1
BFP640ESDH6327XTSA1 by Infineon is a NPN RF BJT transistor with 4.1V VCE, 0.05A IC, and 45000MHz fT. It is used in X Band amplifiers for high-frequency applications. The package is a small outline with gull wing terminals and AEC-Q101 standard compliance.
MMBTH10
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 650 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .05 A;
2N4260
2N4260 by Texas Instruments is a PNP BJT for RF applications. With hFE of 30, it operates at 200°C with VCE of 15V and IC of 0.03A. Ideal for amplifiers in the UHF band, it has a fT of 1.6MHz and Pd max of 0.2W in a cylindrical package with isolated case connection.
BFU530WX
The NXP Semiconductors BFU530WX is an RF BJT transistor with NPN polarity, suitable for amplifier applications in the L Band. It has a max operating temperature of 150°C, a collector-emitter voltage of 12V, and a transition frequency of 11GHz. This small outline transistor comes in a plastic/epoxy package with gull wing terminals for surface mount assembly.
BFR93AW
Vishay Telefunken
RF Small Signal Bipolar Transistors; Surface Mount: YES; Package Shape: RECTANGULAR; Terminal Position: DUAL; No. of Terminals: 3; JESD-30 Code: R-PDSO-G3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved