Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: COMPLEX; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
Median Price
$0.396
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.329
10k+ parts
$0.293
Freelance Electronics
$0.261
$0.275
$0.259
Digiode
$0.309
Component Electronics Inc.
$1.150
$0.870
$0.750
Chip Stock
R&J Components
Vyrian
Bristol Electronics
Semi Source
Sensible Micro Corp
Electronics Depot
J2 Sourcing AB
ECAB
Inland Empire Components Inc.
Quantum Digital Technology
LWI Electronics Inc
Prism Electronics
Nova Conductors
Corohmni
$0.205
Ampacity Inc.
$0.276
Corphita
$0.292
Component Stockers USA
$0.330
$0.220
$0.200
Benley Electronics
$2.000
AZTECH Wire
$9.425
RC Electronics
$0.460
$0.440
$0.430
QUARKTWIN TECHNOLOGY LTD
Component Connect
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Continental Prestige Electronics
Argo Parts USA
Authorized Procurement Solutions
Problanco Electronics
UHIMA Technologies
Kepictronics
Bastille Electronics
Perfect Parts
Power Bipolar Junction Transistors (BJT) MC1413BDR2 attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Motorola
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
MC1413BDR2 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Motorola Solutions, Inc., is an American video equipment, telecommunications equipment, software, systems and services provider that succeeded Motorola, Inc., following the spinoff of the mobile phone division into Motorola Mobility in 2011. The company is headquartered in Chicago, Illinois.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Sensitron Semiconductor
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
TIP142
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 10 A; Terminal Position: SINGLE;
TIP29C
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 1 A;
BD138
Samsung
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 75 MHz; Maximum Power Dissipation (Abs): 8 W; Maximum Collector Current (IC): 1.5 A;
TIP36C
Central Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 25 A;
TIP117
Motorola
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A;
BD13916S
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 12.5 W; Maximum Collector Current (IC): 1.5 A; Transistor Application: SWITCHING;
TIP31C
Microsemi
NPN; Surface Mount: NO; Maximum Collector Current (IC): 3 A; Transistor Element Material: SILICON; No. of Terminals: 3; JESD-30 Code: R-PSFM-T3;
2SC5200-O(S1,F
Toshiba
Power Bipolar Transistors;
BD243C
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
TIP42C
Inchange Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
TIP120
Weitron Technology
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Maximum Collector-Emitter Voltage: 60 V; Package Style (Meter): FLANGE MOUNT;
2N3055
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2.5 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
TIP127
PNP; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A;
TIP41C
BD139.10
BD139.10 by Motorola is a NPN power BJT with 3 terminals and max. power dissipation of 8W. It is ideal for switching applications, offering a max. collector-emitter voltage of 80V and max. collector current of 1.5A, with a min DC current gain of 63 (hFE).
BUV48A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Form: THROUGH-HOLE;
MJD44H11J
MJD44H11J by Nexperia is a NPN BJT transistor for switching applications. It has a max VCEsat of 1V, max collector-emitter voltage of 80V, and max collector current of 8A. With a small outline package style, it operates b/w -55 to 150°C and offers a transition frequency of 160MHz.
TIP122
Rectron
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; JESD-30 Code: R-PSFM-T3; No. of Terminals: 3;
BD139G
The Onsemi BD139G is a NPN BJT transistor with max. power dissipation of 12.5W, hFE of 25, and max. collector current of 1.5A. Ideal for amplifier applications due to its single configuration and max. collector-emitter voltage of 80V, operating up to 150°C in a rectangular package style with through-hole terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC1413BDR2G
MC1413BDR2G by Onsemi is a NPN BJT transistor with 1000 min hFE. It operates up to 150°C, handles 50V max collector-emitter voltage, and supports switching applications. The package is small outline with 16 terminals in gull wing form for surface mount assembly.
MC1413DR2G
MC1413DR2G by Onsemi is a NPN BJT transistor for switching applications. It has hFE of 1000, VCE of 50V, and IC of 0.5A. With a max operating temperature of 150°C, it is ideal for surface mount designs in various electronic circuits.
MC1413DG
MC1413DG by Onsemi is a NPN power bipolar junction transistor (BJT) with a max collector-emitter voltage of 50V and a max collector current of 0.5A. It is commonly used for switching applications in small outline packages, with an operating temperature range of -20 to 150°C.
MC1413PG
MC1413PG by Onsemi is a NPN power bipolar junction transistor (BJT) with a max collector-emitter voltage of 50V and a max collector current of 0.5A. It is commonly used for switching applications due to its high DC current gain (hFE) of 1000.
MC1413BDR2
NPN; Configuration: COMPLEX; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Transistor Application: SWITCHING; Terminal Form: GULL WING;
MC1413BD
NPN; Configuration: COMPLEX; Surface Mount: YES; Maximum Collector Current (IC): .5 A; JESD-609 Code: e0; Transistor Application: SWITCHING;
MC1413BD by Onsemi is a NPN BJT transistor for switching applications. It has hFE of 1000, VCE of 50V, and IC of 0.5A. The GULL WING terminal form and SMALL OUTLINE package make it suitable for surface mount designs.
MC1413BPG
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Qualification: Not Qualified; Peak Reflow Temperature (C): 260;
MC1413BDG
MC1413BDG by Onsemi is a NPN power bipolar junction transistor (BJT) with a max collector-emitter voltage of 50V and a max collector current of 0.5A. It is commonly used for switching applications due to its high DC current gain (hFE) of 1000.
MC1413DR2
NPN; Configuration: COMPLEX; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Qualification: Not Qualified; No. of Elements: 7;
NPN; Configuration: COMPLEX; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Maximum Collector-Emitter Voltage: 50 V; Peak Reflow Temperature (C): 235;
MC1413D
NPN; Configuration: COMPLEX; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Transistor Application: SWITCHING; Minimum Operating Temperature: -20 Cel;
NPN; Configuration: COMPLEX; Surface Mount: YES; Maximum Collector Current (IC): .5 A; No. of Elements: 7; Maximum Operating Temperature: 150 Cel;
MC1416P
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Style (Meter): IN-LINE; Terminal Form: THROUGH-HOLE;
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
MC1413P
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T16; Terminal Form: THROUGH-HOLE;
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-609 Code: e0; Package Shape: RECTANGULAR;
MC1416BD
NPN; Configuration: COMPLEX; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Terminal Form: GULL WING; Transistor Application: SWITCHING;
MC1416BDR2
NPN; Configuration: COMPLEX; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Transistor Element Material: SILICON;
MC1413BP
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Collector-Emitter Voltage: 50 V; No. of Elements: 7;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved