Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VN2210N3-G by Microchip Technology is a N-CHANNEL FET with 100V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a built-in diode and 0.35 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, it has a max power dissipation of 0.74W and can handle up to 1.2A drain current.
Median Price
$2.455
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.400
100+ parts
$1.240
1k+ parts
-
10k+ parts
Arrow
$1.837
Microchip Technology
$2.490
$1.890
$1.570
$1.450
DigiKey
Mouser Electronics
Master Electronics
$1.320
$1.190
$1.130
Verical
$1.852
$1.765
NAC Semi
$1.460
$1.220
TME
$2.160
$1.760
IBS Electronics
$2.651
$2.594
$2.552
ACDS - Activité Composants Distribution Service
Nova Conductors
Modulus Dynamics
$0.546
Corohmni
$0.946
Ampacity Inc.
$1.470
QUARKTWIN TECHNOLOGY LTD
Lixinc
XL Components Corporation
Authorized Procurement Solutions
Argo Parts USA
QualityLine Systems
Continental Prestige Electronics
Aranea Global
Cyclops Electronics Ltd (Excess)
Perfect Parts
Marpe Global Electronics
Provides durability and protection for the transistor, ensuring a long lifespan.
Allows for efficient switching and control of current flow.
Simplifies circuit design by including a diode, saving space and reducing component count.
Designed for fast switching applications, providing high efficiency and performance.
Suitable for a wide range of voltage applications, ensuring compatibility with various systems.
Efficient power handling capability, allowing for reliable operation under specified conditions.
Facilitates easy installation and soldering onto a circuit board.
Can withstand high temperatures, making it suitable for industrial and automotive applications.
High current rating allows for handling moderate power loads with ease.
Low on-resistance minimizes power loss and improves efficiency in switching operations.
Small Signal Field Effect Transistors (FET) VN2210N3-G attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Microchip Technology
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
VN2210N3-G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
PCN Assembly/Origin - New Mold Compound 16/May/2022
PCN Packaging - Label and Packing Changes 23/Sep/2015
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1554216002
Molex
WIRE AND CABLE;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
National Semiconductor
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Electronic Devices
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Zetex Plc
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
AT90CAN128-16AU
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138W
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .34 W; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
LND150N3-GP013
LND150N3-GP013 by Microchip is a N-CHANNEL FET with 500V DS breakdown voltage, 0.03A ID, and 1000 ohm RDS(on). Ideal for switching applications, it operates in depletion mode with a max temp of 150°C. The transistor features a built-in diode and has a package style of cylindrical.
MMBF170
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .5 A; Transistor Application: SWITCHING;
FDN340P-F095
Fairchild Semiconductor's FDN340P-F095 is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 2A, Power Dissipation of 0.5W, and operates in ENHANCEMENT MODE. The transistor has a GULL WING terminal form, RECTANGULAR package shape, and METAL-OXIDE SEMICONDUCTOR technology.
FDV301N-NB9V005
FDV301N-NB9V005 by Fairchild Semiconductor is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.5A Drain Current, and 4 ohm On Resistance. Ideal for SWITCHING applications in small outline packages with -55 to 150 °C operating temperature range.
BSS84PH6433
Infineon Technologies
BSS84PH6433 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, 0.17A ID, and 8 ohm RDS(on). Ideal for small signal applications in automotive electronics due to AEC-Q101 standard compliance.
ZXMN6A07FTA
Diodes Incorporated
ZXMN6A07FTA by Diodes Inc. is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.93A Drain Current, and 0.3 ohm On Resistance. Ideal for SWITCHING applications in small outline packages with 150°C max temp.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
BSS123W
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Elements: 1;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
FDN304P
FDN304P by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, ideal for switching applications. It features a max drain current of 2.4A and 0.052ohm on-resistance, operating in enhancement mode at up to 150°C. With a small outline package style and matte tin finish, it offers efficient performance in compact designs.
ZVP1320FTA
ZVP1320FTA by Diodes Inc. is a P-CHANNEL FET with 200V DS Breakdown Voltage, 0.035A Drain Current, and 80 ohm On Resistance. Ideal for small signal applications in electronics due to its compact SMALL OUTLINE package and ENHANCEMENT MODE operation. Suitable for use in various electronic circuits requiring low power dissipation and high voltage tolerance.
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
BSS123G
Changzhou Galaxy Century Microelectronics
Small Signal Field-Effect Transistors;
BSS123L
BSS123L by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A ID, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode. This small outline transistor in gull wing package is designed for surface mount technology.
NDS356AP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Terminal Position: DUAL; Maximum Time At Peak Reflow Temperature (s): 30;
2N7002K
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Terminal Position: DUAL; Package Style (Meter): SMALL OUTLINE; Minimum DS Breakdown Voltage: 60 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Minimum Operating Temperature: -65 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VN2222LLG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; No. of Elements: 1; Maximum Drain Current (ID): .15 A;
VN2222LL-G
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; No. of Elements: 1; Minimum DS Breakdown Voltage: 60 V;
Microchip Technology's VN2222LL-G is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for SWITCHING applications. It features 0.23A max drain current, 7.5Ω max on resistance, and 8pF feedback capacitance. Operating in enhancement mode, it has a power dissipation of 1W and can withstand temperatures from -55°C to 150°C.
VN2222LL-GP003
VN2222LL-GP003 by Microchip is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for SWITCHING applications. It features a single configuration with built-in diode and operates in ENHANCEMENT MODE. With 1W power dissipation and -55 to 150 °C operating temperature range, it offers reliable performance in various electronic circuits.
VN2222LL-GP013
VN2222LL-GP013 by Microchip is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for SWITCHING applications. It features a single configuration with built-in diode and operates in ENHANCEMENT MODE. With 1W power dissipation and -55 to 150 °C operating temperature range, it offers reliable performance in various electronic circuits.
VN2222LL-GP002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; JESD-609 Code: e3; Terminal Form: THROUGH-HOLE;
VN2222LL-GP005
VN2222LL-GP005 by Microchip is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for SWITCHING applications. It features a single configuration with built-in diode and operates in ENHANCEMENT MODE. With 1W power dissipation and -55 to 150 °C operating temperature range, it offers reliable performance in various electronic circuits.
VN2222LL-GP014
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Terminal Position: BOTTOM; Transistor Element Material: SILICON;
VN2210N3-G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-30 Code: O-PBCY-W3; Operating Mode: ENHANCEMENT MODE; Terminal Form: WIRE;
VN2222LLRLRE
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-609 Code: e0; No. of Terminals: 3; Maximum Operating Temperature: 150 Cel;
VN2222LLRLRAG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Package Shape: ROUND; Terminal Form: THROUGH-HOLE;
VN2222LL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
VN2222LLRLRM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Operating Temperature: 150 Cel;
VN2222RLRM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Operating Mode: ENHANCEMENT MODE; No. of Elements: 1;
VN2222RLRA
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Maximum Drain Current (ID): .15 A; Terminal Position: BOTTOM;
VN2222LLZL1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Operating Temperature: 150 Cel;
VN2222LLRL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Package Shape: ROUND; Additional Features: EUROPEAN PART NUMBER;
VN2222LLRL1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Finish: TIN LEAD;
VN2222LLRLRA
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Maximum Drain-Source On Resistance: 7.5 ohm; Peak Reflow Temperature (C): 235;
VN2210N3P003
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Minimum DS Breakdown Voltage: 100 V; Operating Mode: ENHANCEMENT MODE; Transistor Element Material: SILICON;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved