Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Power Dissipation (Abs): .16 W; Maximum Collector Current (IC): .035 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
ComSIT Distribution GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Modulus Dynamics
$1.135
$1.090
$1.044
Native Components
$1.957
Northwest PG Solutions
$2.153
Corphita
RF Small Signal Bipolar Junction Transistors (BJT) BFP420E6433 attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Infineon Technologies
Additional Features:
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
Highest Frequency Band:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
BFP420E6433 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Surge Components
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Rfe International
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
1N4148
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
2N5109
2N5109 by Texas Instruments is a NPN BJT transistor with max. collector-emitter voltage of 20V and max. collector current of 0.4A, ideal for amplifier applications in the very high frequency band up to 1200MHz. Its package style is cylindrical with a metal body material and wire terminals, featuring a single configuration design.
CA3083Z
Intersil
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: NO; Nominal Transition Frequency (fT): 450 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A;
TIS64A
TIS64A by Texas Instruments is a NPN BJT transistor with 3 terminals, ideal for amplifier applications in the very high frequency band. It has a max power dissipation of 0.5W, operating temperature up to 150°C, and a transition frequency of 500MHz. The package style is cylindrical with a plastic/epoxy body material and wire terminals.
SD1222-6
STMicroelectronics
NPN; Surface Mount: NO; Transistor Element Material: SILICON;
MMBTH10LT1
MMBTH10LT1 by Onsemi is an NPN RF BJT transistor with a max operating temp of 150°C. It has a transition frequency of 650 MHz and a collector-emitter voltage of 25V, making it ideal for ultra-high frequency amplifier applications in small outline packages.
HFA3096BZ96
Renesas Electronics
HFA3096BZ96 by Renesas Electronics is a RF BJT with NPN and PNP channels, 5 elements, and 8000 MHz fT. It's used for amplification in the UHF band, has 16 terminals, and is surface mountable. The package is small outline with gull wing terminals made of silicon material.
2N3553
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Power Dissipation (Abs): 7 W; Maximum Collector Current (IC): 1 A;
BFQ252
NXP Semiconductors
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1300 MHz; Maximum Power Dissipation (Abs): 3 W; Maximum Collector Current (IC): .3 A;
PBR951,215
NXP Semiconductors PBR951,215 is a NPN RF BJT transistor with 3 terminals. It operates in the ultra-high frequency band up to 8 GHz and has a max power dissipation of 0.365 W. Ideal for amplifier applications, it can handle a max collector-emitter voltage of 10V at an operating temp of 175°C.
BFR93AR
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .035 A;
CA3083M
Harris Semiconductor
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 450 MHz; Maximum Collector Current (IC): .1 A; JESD-609 Code: e0;
934067694115
RF Small Signal Bipolar Transistors;
MMBTH10
MMBTH10 by Onsemi is an NPN RF BJT transistor with a max fT of 650 MHz. It's a single configuration amplifier in a small outline package, suitable for ultra-high frequency applications. With a max operating temp of 150°C and Pdiss of 0.225W, it's ideal for high-frequency circuit designs.
BFG425W,115
BFG425W,115 by NXP Semiconductors is a RF Small Signal Bipolar Junction Transistor (BJT) with NPN polarity. It is designed for switching applications in the L Band frequency range up to 25 GHz. This surface mount transistor has a max power dissipation of 0.135 W and can handle a max collector current of 0.03 A.
BFY90
Siemens
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2000 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .025 A;
BFG540/X,215
NXP Semiconductors' BFG540/X,215 is a NPN RF BJT with 4 terminals in a small outline package. It operates in L Band with fT of 9000 MHz and can handle 0.12 A collector current. Ideal for amplifier applications, it has a max power dissipation of 0.5 W at 150°C ambient temperature.
MPS3563RLRE
MPS3563RLRE by Onsemi is an NPN RF BJT transistor with a max fT of 600 MHz. It operates at up to 150 °C, has a VCEO of 12V, and IC of 0.05A. Ideal for amplifier applications in the UHF band, it features a plastic/epoxy package with through-hole terminals.
PN5179
PN5179 by Onsemi is an NPN RF BJT transistor with a max VCEsat of 0.4V and min Gp of 15dB, ideal for amplifier applications in the very high frequency band. It has a max power dissipation of 0.6W, operating temperature up to 150 °C, and a transition frequency of 900MHz.
HFA3127RZ96
Integrated Device Technology
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; JESD-609 Code: e3;
UMX5NTR
ROHM
ROHM UMX5NTR is an NPN BJT transistor with 2 elements, ideal for amplifier applications. It has a max power dissipation of 0.15W and operates at up to 150°C. With a transition frequency of 3200MHz, it offers high performance in a small outline package suitable for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BFP450H6327XTSA1
BFP450H6327XTSA1 by Infineon Technologies is a NPN RF BJT transistor with 4 terminals, suitable for X Band applications. It has a max fT of 42 GHz, IC of 0.15A, and VCE of 4V. Ideal for amplifier circuits in small outline packages with Gull Wing terminals.
BFP420H6327XTSA1
Infineon's BFP420H6327XTSA1 is an NPN RF BJT transistor with a max fT of 25 GHz. It is ideal for X Band applications, featuring a max VCE of 4.5V and IC of 0.035A. The transistor operates in temperatures as low as -65°C and complies with AEC-Q101 standards.
BFP420FH6327XTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .06 A; Terminal Form: FLAT;
BFP405FH6327XTSA1
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; Terminal Form: FLAT;
BFP405H6327XTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .025 A; JESD-30 Code: R-PDSO-G4;
BFP420H6327
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .035 A; No. of Elements: 1;
BFP420E6327HTSA1
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .035 A; Package Body Material: PLASTIC/EPOXY;
BFP405H6433TR
BFP420E6433HTMA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Power Dissipation (Abs): .16 W; Maximum Collector Current (IC): .035 A;
BFP420ECSP
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .035 A; Transistor Element Material: SILICON;
BFP405E6327
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Power Dissipation (Abs): .055 W; Maximum Collector Current (IC): .012 A;
BFP405ECSP
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; Package Shape: RECTANGULAR;
BFP405H6740XT
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .025 A; Transistor Element Material: SILICON;
BFP420E6327BTSA1
BFP405E6327XT
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; Package Shape: RECTANGULAR;
BFP410
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .04 A;
BFP405F
BFP410H6327XTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .04 A; Package Shape: RECTANGULAR;
BFP405H6740
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .025 A; No. of Terminals: 4;
BFP420E6327
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .035 A; Highest Frequency Band: X BAND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved